Sandisk 240GB Extreme PRO manual

Sandisk 240GB Extreme PRO
7.5 · 2
PDF manual
 · 7 pages
English
manualSandisk 240GB Extreme PRO
1

SanDisk

®

Solid State Drive

Quick-Start Installation Guide

Upgrading your existing hard disk drive (HDD) to a new SanDisk Solid State Drive (SSD) is easy!
This guide provides quick instructions on how to upgrade your SATA-based desktop or notebook computer
HDD to a SanDisk SSD. We also cover cloning your data from your current HDD to your new SanDisk SSD
using cloning software.
Replacing your HDD with a solid state drive consists of three easy steps:
1. Connect your SanDisk SSD to your computer
2. Clone the data from your existing HDD to your new SanDisk SSD
3. Uninstall your HDD and replace it with your new SanDisk SSD
• Obtaindatacloningsoftware.
There are many options available for purchase, but in this guide we will use data cloning software
provided by Apricorn® to walk you through the data cloning process.
• Conrmyouhavetherequiredhardware*foryourinstallationscenario:
1. SATA data cable
(required for desktops computers only)
2. USB-to-SATA data cable
3. 3.5-inch mounting adapter and screws
(required for desktop computers only)
4. Phillips screwdriver
*EachoftheabovehardwarecomponentsaresoldseparatelyorcanbefoundintheSanDiskSSDConversionKit.Seewww.sandisk.com/go-SSD

BEFOREYOUSTART

1
4
This guide applies to most solid state drives;
check the instructions included with your SSD
for more details.
NOTE:
2
3

Manual

View the manual for the Sandisk 240GB Extreme PRO here, for free. This manual comes under the category Solid state drives (SSD) and has been rated by 2 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Sandisk 240GB Extreme PRO or do you need help? Ask your question here

Need help?

Do you have a question about the Sandisk 240GB Extreme PRO and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Sandisk 240GB Extreme PRO owners to provide you with a good answer.

Number of questions: 0

Sandisk 240GB Extreme PRO specifications

Below you will find the product specifications and the manual specifications of the Sandisk 240GB Extreme PRO.

General
Brand Sandisk
Model 240GB Extreme PRO | SDSSDXPS-240G-G25
Product Solid state drive (SSD)
EAN 619659119409, 0619659119409, 6196591194090, 0012300420280, 0803982813817, 5054230884089, 4053162673304, 5054484651048, 7427457845863, 0787461827383, 0791836627102, 0768451100747, 5902805401424, 0809394267354, 0795871367450, 5054629166956, 5054533651043, 5902805401547, 0801940116970, 6953040956391
Language English
Filetype User manual (PDF)
Features
SSD capacity 240 GB
Interface Serial ATA III
Read speed 550 MB/s
Write speed 520 MB/s
Data transfer rate 6 Gbit/s
S.M.A.R.T. support
TRIM support
SSD form factor -
Component for PC
NVMe -
Other features
Product colour Black
Power
Power consumption (read) 0.13 W
Power consumption (write) 0.13 W
Operational conditions
Operating temperature (T-T) 0 - 70 °C
Storage temperature (T-T) -55 - 85 °C
Operating shock 1500 G
Operating vibration 5 G
Weight & dimensions
Width 69.85 mm
Depth 100.5 mm
Height 7 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sandisk 240GB Extreme PRO below.

Is your question not listed? Ask your question here

No results