Set Anynet+ (HDMI-CEC) (SettingsGeneralExternal Device Manager
Anynet+ (HDMI-CEC)) to Off.
The message "Connecting
to Anynet+ device..." or
"Disconnecting from
Anynet+ device" appears
on the screen.
You cannot use the remote control when the TV is configuring Anynet+ or switching to a
viewing mode. Use the remote control after the TV has completed the Anynet+ configuration or
has switched to a viewing mode.
The Anynet+ device won't
play.
You cannot use the play function when Start Setup is in progress.
The connected device is
not displayed.
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Go to Anynet+ (HDMI-CEC) (SettingsGeneralExternal Device Manager
Anynet+ (HDMI-CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is
connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI cable has
been disconnected, please scan for the device again.
The TV audio is not being
played through the
receiver.
Connect an optical cable to the TV and the receiver.
ARC enables the TV to output digital sound via the HDMI (ARC) port.
However, ARC is only available when the TV is connected to an audio receiver that supports
ARC.
Manual
View the manual for the Samsung UE65MU6500S here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 6.1. This manual is available in the following languages: English. Do you have a question about the Samsung UE65MU6500S or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung UE65MU6500S below.
What's the best viewing distance for my Samsung television?
The ideal viewing distance for your Samsung television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.
My television has no signal anymore, now what?
If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.
What screen dimensions does my television have?
The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Can bluetooth devices of different brands be connected to each other?
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
What is the screen size of the Samsung UE65MU6500S?
The screen size of the Samsung UE65MU6500S is 65 ".
What is the screen resolution of the display of the Samsung UE65MU6500S?
The screen resolution of the Samsung UE65MU6500S is 3840 x 2160 pixels.
Is the manual of the Samsung UE65MU6500S available in English?
Yes, the manual of the Samsung UE65MU6500S is available in English .
Need help?
Do you have a question about the Samsung and is the answer not in the manual?
Question and answer
Number of questions: 0