Samsung SR8825 manual

Samsung SR8825
7.9 · 8
PDF manual
 · 200 pages
English
manualSamsung SR8825
Safety information _3

Safety information

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the
following:
READ ALL INSTRUCTIONS BEFORE USING YOUR ROBOTIC VACUUM CLEANER.
Unplug from outlet when not in use and before conducting maintenance.

WARNING: to reduce the risk of fi re, electric shock, or injury:

GENERAL
Use only as described in this manual.
Do not operate the robotic vacuum cleaner or charger if it has been damaged in any way.
If the cleaner is not working as it should, has been dropped, damaged, left outdoors,
or dropped in water, return it to a customer care center.
Do not handle the charger or robotic vacuum cleaner with wet hands.
Use only on dry, indoor surfaces.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
BATTERY CHARGER
Do not modify the polarized plug to fi t a non-polarized outlet or extension cord.
Do not use outdoors or on wet surfaces.
Unplug the charger from the outlet when not in use and before servicing.
Use only the charger supplied by the manufacturer to recharge.
Do not use with a damaged cord or plug.
Do not pull or carry by the cord, use the cord as a handle, close the door on the cord,
or pull the cord around sharp edges or corners. Keep the cord away from heated
surfaces.
Do not use extension cords or outlets with inadequate current carrying capacity.
Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
Do not mutilate or incinerate batteries as they will explode at high temperatures.
Do not attempt to open the charger. Repairs should only be carried out by a qualifi ed
customer care centre.
Do not expose the charger to high temperatures or allow moisture or humidity of any
kind to come into contact with the charger.

Manual

View the manual for the Samsung SR8825 here, for free. This manual comes under the category vacuum cleaners and has been rated by 8 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Samsung SR8825 or do you need help? Ask your question here

Need help?

Do you have a question about the Samsung and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Samsung SR8825 specifications

Below you will find the product specifications and the manual specifications of the Samsung SR8825.

The Samsung SR8825 is a bagless vacuum cleaner that offers efficient cleaning with a cleaning speed of 300 mm/sec. Equipped with a HEPA filtration system, it effectively traps allergens and fine particles, ensuring a cleaner environment. With its automatic base station return capability, the vacuum cleaner can easily navigate back to its charging station when not in use. Additionally, it can be operated remotely, allowing for convenient control even from a distance. The vacuum cleaner boasts an impressive efficiency rating of 92%, maximizing its cleaning performance while minimizing energy consumption. It operates at a noise level of 70 dB, providing a relatively quiet cleaning experience. This feature makes it suitable for use in homes where a peaceful environment is desired. The Samsung SR8825 has a charging time of 2 hours, allowing for quick replenishment of its battery. In terms of dimensions, it has a diameter of 355 mm and a height of 93 mm, making it compact and easy to maneuver. Despite its small size, it has a weight of 4000 g, reflecting its sturdiness and durability. Overall, the Samsung SR8825 offers a reliable and efficient cleaning solution with its bagless design, speedy cleaning, HEPA filtration system, automatic base station return, remote operation, and impressive efficiency rating. Its compact size and durability make it a practical choice for households looking for a high-performing vacuum cleaner.

General
BrandSamsung
ModelSR8825 | VCR8825T4R
Productvacuum cleaner
EAN8806071595382
LanguageEnglish
FiletypeUser manual (PDF)
Design
Product colorRed, Silver
Dust container typeBagless
Remotely operatedYes
ShapeRound
Performance
Dust capacity (total)- L
Cleaning speed300 mm/sec
HEPA filtration systemYes
Automatic base station returnYes
Efficiency92 %
Noise level70 dB
Power
Battery technologyNickel-Metal Hydride (NiMH)
Battery capacity- mAh
Charging time2 h
Weight & dimensions
Diameter355 mm
Height93 mm
Weight4000 g
Packaging data
Package weight7000 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung SR8825 below.

My Samsung vacuum is losing suction. Why is that?

Your Samsung vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged

How often should I check the filter?

A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.

What do I do with a smelly vacuum cleaner?

A commonly used method is to put a little washing powder in the dust container or the dust bag.

How often should I vacuum my house?

For allergy sufferers, vacuuming the house at least twice a week is recommended.

What is the weight of the Samsung SR8825?

The Samsung SR8825 has a weight of 4000 g.

What is the height of the Samsung SR8825?

The Samsung SR8825 has a height of 93 mm.

Is the Samsung SR8825 a bagless vacuum cleaner?

Yes, the Samsung SR8825 is a bagless vacuum cleaner. This means that it does not require the use of disposable bags for collecting dust and debris, which can save the user money in the long run.

Does the Samsung SR8825 have a HEPA filtration system?

Yes, the Samsung SR8825 has a HEPA filtration system. This means that it is able to effectively capture and trap small particles, such as allergens and dust mites, providing cleaner air for the user and helping to improve indoor air quality.

Does the Samsung SR8825 have an automatic base station return feature?

Yes, the Samsung SR8825 has an automatic base station return feature. This means that when the vacuum cleaning is complete or the battery is running low, it will automatically return to its charging station, providing convenience and ensuring that the vacuum is always ready for use.

Can the Samsung SR8825 be operated remotely?

Yes, the Samsung SR8825 can be operated remotely. This means that the user can control the vacuum cleaner without having to physically be near it, making it convenient for those who may have mobility restrictions or prefer to control the vacuum from a distance.

What is the efficiency rating of the Samsung SR8825?

The efficiency rating of the Samsung SR8825 is 92%. This means that it is able to effectively clean and remove dust and debris from the floor, scoring relatively high compared to other vacuum cleaners on the market.

How do I safely clean the Samsung SR8825 vacuum cleaner?

To safely clean the Samsung SR8825 vacuum cleaner, follow these steps: 1. Before cleaning, make sure the robotic vacuum cleaner is turned off and unplugged from the power source. 2. Remove any hard or sharp objects, such as glass, nails, screws, coins, or any other debris, from the area where you will be cleaning. 3. Check that the filter is in place and properly installed. Do not use the vacuum cleaner without a filter. 4. Avoid putting any objects into the openings of the vacuum cleaner. Keep the openings free of dust, lint, hair, or anything that may obstruct airflow. 5. Do not pick up toxic materials, such as chlorine bleach, ammonia, or drain cleaner, as they may damage the vacuum cleaner. 6. Avoid picking up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 7. Do not use the vacuum cleaner to pick up flammable or combustible liquids, such as gasoline, and avoid using it in areas where these liquids may be present. 8. Do not use the vacuum cleaner in an enclosed space filled with vapors from oil-based paint, paint thinner, mothproofing substances, flammable dust, or other explosive or toxic vapors. 9. If you notice any leaks from the battery cells, handle the vacuum cleaner with caution and seek medical attention if the liquid comes into contact with your skin or eyes. By following these steps, you can safely clean your Samsung SR8825 vacuum cleaner.

What should I do if the Samsung SR8825 vacuum cleaner does not turn on?

If your Samsung SR8825 vacuum cleaner does not turn on, there are a few steps you can take to troubleshoot the issue: 1. Check if the dust bin is properly assembled. If not, install the dust bin correctly. 2. Ensure that the Power Switch is turned on. If it is off, turn it on. 3. Verify if the cleaning mode is activated. Press the button with the cleaning mode symbol to turn it on. To turn it off, press and hold the button for 3 seconds or longer. 4. If the battery level is flashing and displaying "LO" on the panel, manually dock the vacuum cleaner onto the charger to charge it. 5. If the vacuum cleaner stops operating while cleaning, check if the battery level is flashing and displaying "LO" on the panel. If so, manually dock the vacuum cleaner onto the charger to charge it. 6. If the vacuum cleaner becomes hooked on wires on the floor, turn off the Power Switch and remove the wires. 7. If the vacuum cleaner is stuck to the floor due to a height difference, turn off the Power Switch and move it to another place to clean. 8. Check if there is a thin towel wrapped around the driving wheel. If so, turn off the Power Switch and remove the towel. 9. If the vacuum cleaner is stuck on the doorsill, turn off the Power Switch and move it to another place to clean. 10. If the suction power is weak while cleaning, check if the dust bin is full. If so, stop the vacuum cleaner and empty the dust bin. Also, check if the suction inlet is clogged by foreign substances. If there are any, turn off the Power Switch and remove them. Additionally, check if the filter is clogged and clean it well. 11. If the vacuum cleaner cannot find the charger, check if the power plug of the charger is plugged correctly into the outlet. Remove any obstacles within a range of about 1 meter in front of the charger and about 0.5 meters to the left and right of the charger. Also, wipe off any foreign substances on the charging pin with a dry towel. By following these steps, you should be able to troubleshoot and resolve the issue of your Samsung SR8825 vacuum cleaner not turning on.

How can I troubleshoot error codes on the Samsung SR8825 vacuum cleaner?

To troubleshoot error codes on the Samsung SR8825 vacuum cleaner, follow these steps: 1. If the robotic vacuum cleaner is caught, stuck, or trapped while navigating, turn off the Power Switch at the bottom and move the vacuum cleaner to a different location. 2. If a foreign substance (such as string, paper, or a toy) is caught in the power brush, turn off the Power Switch and remove the foreign substance from the power brush. 3. If a foreign substance is caught in the left or right driving wheel, turn off the Power Switch and remove the foreign substance from the respective wheel. 4. Check the bumper sensor. If it is stuck, slightly pull the bumper outward. 5. If there is a foreign substance on the obstacle sensor window, turn off the Power Switch and wipe the window with a soft cloth. 6. If there is a foreign substance on the cliff sensor window, turn off the Power Switch and wipe the window with a soft cloth. 7. Make sure the dust bin is inserted properly. Insert it until you hear a "Click" sound. 8. If a foreign substance is caught on the edge-cleaning side rotating brush, turn off the Power Switch and wipe the brush clean. Remember, if you press the Start/Stop button or turn off the Power Switch, the error code will be cleared.

How do I start the cleaning process on the Samsung SR8825 vacuum cleaner?

To start the cleaning process on the Samsung SR8825 vacuum cleaner, follow these steps: 1. Make sure the Power Switch at the bottom of the main unit is turned off before cleaning the robotic vacuum. 2. Check the side rotating brush for any bends or foreign substances stuck on it. 3. Wear rubber gloves and wrap the side rotating brush with a cloth soaked in hot water for about 10 seconds. Wipe the brush on the cloth to clean it. 4. Repeat the cleaning procedure for the side rotating brush by turning it. 5. If there is hair or string wrapped between the main unit and the side rotating brush, use a (+) driver to remove the screw of the side rotating brush and detach it. 6. When reassembling the brush, ensure that the "L" mark on the edge-cleaning side rotating brush aligns with the "L" mark on the main unit. (Note: The right side rotating brush has the letter "R" carved on it.) 7. It is important to clean the side rotating brush frequently as it easily attracts hair and other foreign substances, which can damage the brush. Remember to follow these steps to start the cleaning process on the Samsung SR8825 vacuum cleaner.

How do I safely clean the Samsung SR8825 vacuum cleaner?

To safely clean the Samsung SR8825 vacuum cleaner, follow these steps: 1. Before cleaning, make sure the robotic vacuum cleaner is turned off and unplugged from the power source. 2. Remove any hard or sharp objects, such as glass, nails, screws, coins, or any other debris, from the area where you will be cleaning. 3. Check that the filter is in place and properly installed. Do not use the vacuum cleaner without a filter. 4. Avoid putting any objects into the openings of the vacuum cleaner. Keep the openings free of dust, lint, hair, or anything that may obstruct the airflow. 5. Do not pick up toxic materials, such as chlorine bleach, ammonia, or drain cleaner, with the vacuum cleaner. 6. Avoid picking up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 7. Do not use the vacuum cleaner to pick up flammable or combustible liquids, such as gasoline, and avoid using it in areas where these liquids may be present. 8. Do not use the vacuum cleaner in an enclosed space filled with vapors from oil-based paint, paint thinner, mothproofing substances, flammable dust, or other explosive or toxic vapors. 9. If you notice any leaks from the battery cells, stop using the vacuum cleaner immediately and seek professional assistance. 10. Regularly clean the obstacle and cliff sensors to ensure accurate functioning. Remember to always follow these safety guidelines to maintain the optimal performance and longevity of your Samsung SR8825 vacuum cleaner.

Why is the Samsung SR8825 vacuum cleaner not turning on?

If your Samsung SR8825 vacuum cleaner is not turning on, there are a few steps you can take to troubleshoot the issue: 1. Check the Power Switch: Make sure the Power Switch on the bottom of the main unit is turned on. If it is turned off, the vacuum cleaner will not receive power. Turn the Power Switch on and check if the icons on the cleaner are turned on. 2. Charge the Battery: If the battery charge is depleted, the vacuum cleaner will not turn on. Install the charger and fully charge the battery before use. Turn over the main unit and turn the Power Switch on. If the icons are not turned on, dock the cleaner to the charger station and turn the Power Switch on. 3. Reset Settings: If you have turned off the Power Switch, all settings will be reset. To use the vacuum cleaner again, turn the Power Switch on and press the "Power" button or "Start/Stop" button if the power is automatically turned off after 10 minutes of inactivity. Remember, these steps are specific to the Samsung SR8825 vacuum cleaner and should help you troubleshoot the issue of it not turning on.

How do I troubleshoot error codes displayed on the Samsung SR8825 vacuum cleaner?

To troubleshoot error codes displayed on the Samsung SR8825 vacuum cleaner, follow these steps: 1. If the robotic vacuum cleaner is caught, stuck, or trapped while navigating, turn off the Power Switch at the bottom and move the vacuum cleaner to a different location. 2. If a foreign substance (such as string, paper, or a toy) is caught in the power brush, turn off the Power Switch and remove the foreign substance from the power brush. 3. If a foreign substance is caught in the left or right driving wheel, turn off the Power Switch and remove the foreign substance from the respective wheel. 4. Check the bumper sensor. If it is stuck, slightly pull the bumper outward. 5. If there is a foreign substance on the obstacle sensor window, turn off the Power Switch and wipe the window with a soft cloth. 6. If there is a foreign substance on the cliff sensor window, turn off the Power Switch and wipe the window with a soft cloth. 7. Make sure the dust bin is inserted properly. Insert it until you hear a "Click" sound. 8. If a foreign substance is caught on the edge-cleaning side rotating brush, turn off the Power Switch and wipe the brush clean. By following these steps, you can troubleshoot error codes on the Samsung SR8825 vacuum cleaner.

Why is the Samsung SR8825 vacuum cleaner not charging properly?

The Samsung SR8825 vacuum cleaner may not be charging properly due to several reasons. Here are the steps to troubleshoot the issue: 1. Check the charge status: Look at the battery level indicator on the display panel. If the battery level indicator and "FULL" are displayed, the charging is complete. If not, proceed to the next step. 2. Ensure proper connection: Align the charge pins of the main unit with the charge pin of the charger station. Press the main unit until you hear a "Recharging power" sound from the charger. The charging lamp should turn green. If not, try the following steps. 3. Reset the cleaner: Turn off the Power Switch at the bottom of the vacuum cleaner and then turn it back on. This can help reset the charging process. 4. Check the charger: Re-plug the power of the charger to ensure a proper connection. Also, inspect the charge connector on the main unit and the charger for any foreign substances. Wipe them with a dry cloth if necessary. 5. Avoid strong reflectors: Make sure there are no objects near the charger that can interfere with the charging process, such as strong reflectors. 6. Discharge and recharge: If the vacuum cleaner cannot be automatically charged, separate it from the charger and let it discharge naturally. Then, charge it again through the charger. By following these steps, you should be able to resolve the charging issue with the Samsung SR8825 vacuum cleaner.

How do I safely clean hard-to-reach areas with the Samsung SR8825 vacuum cleaner?

To safely clean hard-to-reach areas with the Samsung SR8825 vacuum cleaner, follow these steps: 1. Turn off the power switch at the bottom of the main unit before cleaning the robotic vacuum cleaner. 2. Place a soft cloth on the floor and carefully flip the main unit, placing it down. 3. Check the driving wheel for any foreign substances and remove them using a stick or a pair of blunt nippers if necessary. 4. If the robotic vacuum cleaner starts to zigzag suddenly, there may be foreign substances stuck on the driving wheel. 5. To prevent the robotic vacuum cleaner from becoming clogged, avoid vacuuming toothpicks or cotton swabs. 6. Clean the power brush regularly as long strings or hair can become wrapped around it. 7. Insert the 3 tips at the top of the cover and push the other end until it clicks into place. 8. Be cautious not to vacuum large objects or items that may damage the vacuum cleaner. By following these steps, you can safely clean hard-to-reach areas with the Samsung SR8825 vacuum cleaner.

Why is the Samsung SR8825 vacuum cleaner not turning on?

If your Samsung SR8825 vacuum cleaner is not turning on, there are a few steps you can take to troubleshoot the issue: 1. Check the Power Switch: Make sure the Power Switch on the bottom of the main unit is turned on. If it is turned off, the vacuum cleaner will not receive power. Turn the Power Switch on and check if the icons on the cleaner are turned on. 2. Charge the Battery: If the battery charge is depleted, the vacuum cleaner will not turn on. Install the charger and fully charge the battery before use. Turn over the main unit and turn the Power Switch on. If the icons are not turned on, dock the cleaner to the charger station and turn the Power Switch on. 3. Reset Settings: If you have turned off the Power Switch, all settings will be reset. To use the vacuum cleaner again, turn the Power Switch on and press the "Power" button or "Start/Stop" button if the power is automatically turned off after 10 minutes of inactivity. By following these steps, you should be able to resolve the issue and get your Samsung SR8825 vacuum cleaner to turn on.

How do I troubleshoot if the vacuum cleaner is not picking up dirt effectively?

To troubleshoot if the Samsung SR8825 vacuum cleaner is not picking up dirt effectively, follow these steps: 1. Check if the dust bin is properly assembled. If not, install the dust bin. 2. Ensure that the Power Switch is turned on. 3. Verify if the cleaning mode is activated. Press the corresponding button on the display panel. 4. If the battery level is flashing and displaying "LO," manually dock the vacuum cleaner onto the charger to charge it. 5. If the vacuum cleaner stops operating while cleaning, check if the battery level is flashing "LO." If so, manually dock the vacuum cleaner onto the charger to charge it. 6. Remove any wires or obstacles that may be causing the vacuum cleaner to get stuck. 7. If the vacuum cleaner is stuck on a floor with a height difference, move it to another place to clean. 8. Remove any thin towels or cloths wrapped around the driving wheel. 9. If the vacuum cleaner is stuck on a doorsill, move it to another place to clean. 10. Check if the dust bin is full and empty it if necessary. 11. Remove any foreign substances that may be clogging the suction inlet. 12. Clean the filter thoroughly. 13. Ensure that the charger is plugged correctly into the outlet. 14. Remove any obstacles within a range of about 1 meter in front of the charger and about 0.5 meters to the left and right of the charger. 15. Wipe off any foreign substances on the charging pin with a dry towel. Remember to follow these steps to effectively troubleshoot the vacuum cleaner's performance in picking up dirt.

Is the manual of the Samsung SR8825 available in English?

Yes, the manual of the Samsung SR8825 is available in English .

Is your question not listed? Ask your question here

No results