Samsung SBB-SSF manual

Samsung SBB-SSF
6.4 · 1
PDF manual
 · 104 pages
English
manualSamsung SBB-SSF
21

Control Codes

Viewing control state (Get control command)

Header Command ID Data length Checksum
0xAA Command
type
0

Controlling (Set control command)

Header Command ID Data length Data Checksum
0xAA Command type 1 Value

Command

No. Command type Command Value range
1
Power control 0x11 0~1
2
Volume control 0x12 0~100
3
Input source control 0x14 -
4
Safety Lock 0x5D 0~1
All communications take place in hexadecimals. The checksum is calculated by adding
up all values except the header. If a checksum adds up to be more than 2 digits as shown
below (11+FF+01+01=112), the first digit is removed.
E.g. Power On & ID=0
Header Command ID Data length Data 1 Checksum
0xAA 0x11 1 "Power"
Header Command ID Data length Data 1 12
0xAA 0x11 1 1
To control all devices connected by a serial cable simultaneously irrespective of IDs, set
the ID as "0xFE" and transmit commands. Commands will be executed by each device but
ACK will not respond.

Manual

View the manual for the Samsung SBB-SSF here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Samsung SBB-SSF or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Samsung and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Samsung SBB-SSF specifications

Below you will find the product specifications and the manual specifications of the Samsung SBB-SSF.

General
BrandSamsung
ModelSBB-SSF | SBB-SSE08FL
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung SBB-SSF below.

What's the best viewing distance for my Samsung television?

The ideal viewing distance for your Samsung television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Is the manual of the Samsung SBB-SSF available in English?

Yes, the manual of the Samsung SBB-SSF is available in English .

Is your question not listed? Ask your question here

No results