View the manual for the Samsung QE75Q75BAT here, for free. This manual comes under the category televisions and has been rated by 3 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Samsung QE75Q75BAT or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Samsung QE75Q75BAT.
| Brand | Samsung |
| Model | QE75Q75BAT |
| Product | television |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung QE75Q75BAT below.
The ideal viewing distance for your Samsung television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.
If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.
The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
If the remote control for your Samsung QE75Q75BAT television is not working properly, you can follow these troubleshooting steps: 1. Verify that the infrared remote control signal is being transmitted and received. Make sure the remote control sensor on the TV is blinking. 2. Check if the remote control works properly. You can do this by pressing the power button and observing the front tip of the remote control through the camera on your smartphone. If you cannot see infrared signals, try charging the remote control using the USB port (C-type) on the bottom or exposing the solar cell by turning over the remote. If the remote control has batteries, replace them with new ones. 3. Depending on the model you purchased, the remote control provided may vary. Ensure that you are using the correct remote control for your TV model. By following these steps, you can troubleshoot and resolve issues with the remote control of your Samsung QE75Q75BAT television.
To troubleshoot if your Samsung QE75Q75BAT television is not connecting to the network, you can follow these steps: 1. Check the network cable connection and ensure that the router is powered on. 2. Connect your mobile device to the router via Wi-Fi to verify if the network is functioning properly. 3. Turn off the router and wait for 2 to 3 minutes before turning it back on. This can help refresh the network connection. 4. Double-check if the security key (password) for the network has been entered correctly. 5. If the issue persists, unplug the TV's power cable and plug it back in. Alternatively, you can long-press the power button for at least 3 seconds to perform a power reset. 6. Make sure there are no devices emitting electromagnetic waves placed between the TV and the router, as this can interfere with the network signal. 7. If you are unable to establish a wireless internet connection, try connecting the TV to the router using an Ethernet LAN cable. 8. If the TV successfully connects to the internet via the cable connection, there may be an issue with the wireless router. In this case, consider using a different wireless router. Please note that wired networks are not supported by some models of the Samsung QE75Q75BAT television.
To troubleshoot if your Samsung QE75Q75BAT television is not displaying the mobile device screen, you can follow these steps: 1. Adjust the output resolution of the mobile device to a resolution supported by the TV. This can be done in the display settings of your mobile device. 2. Check the audio output setting on your mobile device if you are using an HDMI connection. Ensure that the audio output is set to the correct option. 3. If you are using a DVI to HDMI cable, make sure to connect a separate audio cable to listen to the audio from the mobile device. 4. To wirelessly connect the TV to your mobile device, refer to the "Smartphone Screen Sharing (Smart View)" section in the Connection Guide of the TV's menu. Make sure both the TV and the mobile device are connected to the same network and follow the instructions provided. 5. If the TV is having difficulties connecting to the mobile device due to surrounding radio interferences, try changing the frequency of the wireless access band and attempt to connect again. By following these steps, you can troubleshoot and resolve issues with displaying the mobile device screen on your Samsung QE75Q75BAT television.
To troubleshoot if the Samsung Smart Remote buttons on your Samsung QE75Q75BAT television are not functioning correctly, you can follow these steps: 1. Check the batteries in the remote control and ensure they are properly inserted. Replace the batteries if necessary. 2. Make sure there are no obstacles between the remote control and the TV that may be blocking the infrared signal. Clear any obstructions and ensure a clear line of sight between the remote control and the TV. 3. Clean the remote control's infrared transmitter and the TV's infrared receiver with a soft, dry cloth. Dust or dirt on these surfaces can interfere with the signal transmission. 4. Reset the remote control by removing the batteries and pressing and holding any button for at least 5 seconds. Then, reinsert the batteries and try using the remote control again. 5. If the issue persists, try pairing the remote control with the TV again. Refer to the "Pairing the Samsung Smart Remote" section in the manual for instructions on how to do this. By following these steps, you can troubleshoot and resolve issues with the buttons on your Samsung Smart Remote for the QE75Q75BAT television.
To troubleshoot if the Smart Hub or other smart features on your Samsung QE75Q75BAT television are not working as expected, you can follow these steps: 1. Check the network connection of your TV. Ensure that the TV is properly connected to the network. You can do this by going to the network settings and verifying the connection status. 2. Restart the TV and the router. Power off both devices, wait for a few seconds, and then power them back on. This can help refresh the network connection and resolve any temporary issues. 3. Update the software of your TV. Go to the settings menu and check for any available software updates. Install the updates if there are any, as they may include bug fixes and improvements for the Smart Hub and other smart features. 4. Reset the Smart Hub. Navigate to the Smart Hub settings and find the option to reset or initialize the Smart Hub. This will restore the Smart Hub to its default settings and may resolve any software-related issues. 5. If the issue persists, contact Samsung customer support for further assistance. They can provide specific troubleshooting steps based on your TV model and the nature of the problem. By following these steps, you can troubleshoot and resolve issues with the Smart Hub and other smart features on your Samsung QE75Q75BAT television.
To troubleshoot if there is no sound or picture when watching TV on your Samsung QE75Q75BAT television, you can follow these steps: 1. Check the connections between the TV and the external devices (such as cable/satellite box, DVD player, or gaming console). Ensure that all cables are securely plugged in and that the correct input source is selected on the TV. 2. Verify that the TV is powered on and the volume is not muted. Press the volume up button on the remote control or the TV to increase the volume. 3. If you are using an external audio system, make sure it is powered on and properly connected to the TV. Check the audio settings on both the TV and the audio system to ensure they are configured correctly. 4. Perform a power reset by unplugging the TV from the power source, waiting for a few minutes, and then plugging it back in. This can help resolve temporary issues with the TV's hardware. 5. If the issue persists, try accessing the TV's menu and performing a factory reset. This will restore the TV to its original settings and may resolve any software-related issues. If none of these steps resolve the issue, it is recommended to contact Samsung customer support for further assistance. They can provide specific troubleshooting steps based on your TV model and the nature of the problem.
Yes, the manual of the Samsung QE75Q75BAT is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Samsung and is the answer not in the manual?
Question and answer
Number of questions: 0