Samsung PH43F-P manual

Samsung PH43F-P
8.2 · 1
PDF manual
 · 91 pages
English
manualSamsung PH43F-P
74
Chapter 5. Menu

Anynet+ (HDMI-CEC)

Anynet+ (HDMI-CEC)

Anynet+ is a function that enables you to control all connected Samsung devices
that support Anynet+ with your Samsung product remote. The Anynet+ system can
be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
You can only control Anynet+ devices using the product remote control, not the
buttons on the product.
The product remote control may not work under certain conditions. If this occurs,
reselect the Anynet+ device.
Anynet+ works when the AV device supporting Anynet+ is in the standby or on
status.
While in PIP mode, Anynet+ functions only when an AV device is connected as
the primary display. It does not work if the AV device is connected as a secondary
display.
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3
devices of the same type.

Troubleshooting for Anynet+

Problem Possible Solution
Anynet+ does not
work.
Check if the device is an Anynet+ device. The Anynet+
system supports Anynet+ devices only.
Check if the Anynet+ device power cord is properly
connected.
Check the Anynet+ device’s Video/Audio/HDMI cable
connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the
System menu.
Check whether the remote control is Anynet+
compatible.
Anynet+ doesn’t work in certain situations. (initial
setup)
If you have removed and then reconnected the HDMI
cable, please make sure to search devices again or turn
your product off and on again.
Check if the Anynet+ function of the Anynet device is
set on.
I want to start
Anynet+.
Check if the Anynet+ device is properly connected to
the product and check if the Anynet+ (HDMI-CEC) is set
to On in the System menu.
I want to exit Anynet+.
Press the
SOURCE
button on the product remote control
and select a non- Anynet+ device.
The message
“Disconnecting
Anynet+ device ...
appears on the screen.
You cannot use the remote control when you are
conguring Anynet+ or switching to a view mode.
Use the remote control after the product has
completed Anynet+ conguration or has nished
switching to Anynet+.

Manual

View the manual for the Samsung PH43F-P here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Samsung PH43F-P or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Samsung and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Samsung PH43F-P specifications

Below you will find the product specifications and the manual specifications of the Samsung PH43F-P.

General
BrandSamsung
ModelPH43F-P | PH43F-P
Producttelevision
EAN0887276200224, 8806088822082
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)
Display
Display diagonal43 "
LED backlighting typeEdge-LED BLU
Display resolution1920 x 1080 pixels
HD typeFull HD
Pixel pitch0.49 x 0.49 mm
Active display area (W x H)940.89 x 529.25 mm
Display brightness700 cd/m²
Contrast ratio (typical)3000:1
Viewing angle, vertical178 °
Viewing angle, horizontal178 °
Response time8 ms
Display number of colors1.073 billion colors
Color gamut72 %
Dynamic contrast ratio marketing nameMega Contrast
Horizontal scan range30 - 81 kHz
Vertical scan range48 - 75 Hz
Display technologyLED
Touchscreen-
Panel life- h
Audio
Built-in speaker(s)Yes
Number of built-in speakers2
RMS rated power20 W
Ports & interfaces
DVI portYes
DVI-I ports quantity1
DisplayPorts quantity2
DisplayPort version1.2
HDMI ports quantity2
HDMI version2.0
Audio (L/R) in1
USB portYes
USB version2.0
USB ports quantity2
Audio (L/R) out1
Ethernet LAN (RJ-45) ports1
RS-232CYes
Wi-FiYes
Ethernet LANYes
VGA (D-Sub) input ports1
Performance
HDCPYes
Operating hours (hours/days)24/7
On Screen Display (OSD)Yes
International Protection (IP) codeIPX5
TV tuner integrated-
Multi-display supported-
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)108 W
Heat dissipation525.14 BTU/h
Power consumption (standby)0.5 W
Power consumption (off)0.5 W
Weight & dimensions
Width959.7 mm
Height550.1 mm
Depth29.9 mm
Weight9400 g
Packaging data
Package width1037 mm
Package height628 mm
Package depth132 mm
Package weight11400 g
Design
VESA mountingYes
Panel mounting interface400 x 400 mm
Bezel width (top)6.9 mm
Bezel width (bottom)6.9 mm
Bezel width (side)8.9 mm
Product colorBlack
Product designDigital signage flat panel
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 80 %
Other features
Plug and PlayYes
L2 cache1000 KB
Memory clock speed1300 MHz
User memory4.25 GB
Quick start guideYes
Computer system
Processor familyARM Cortex
Processor modelA12
Processor frequency1.3 GHz
Processor cores4
Internal memory2.5 GB
Internal storage capacity8 GB
Operating system installedTizen 2.4
Computer systemYes
Packaging content
Warranty cardYes
Cables includedAC
Handheld remote controlYes
Batteries includedYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung PH43F-P below.

What's the best viewing distance for my Samsung television?

The ideal viewing distance for your Samsung television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the weight of the Samsung PH43F-P?

The Samsung PH43F-P has a weight of 9400 g.

What is the screen size of the Samsung PH43F-P?

The screen size of the Samsung PH43F-P is 43 ".

What is the height of the Samsung PH43F-P?

The Samsung PH43F-P has a height of 550.1 mm.

What is the screen resolution of the display of the Samsung PH43F-P?

The screen resolution of the Samsung PH43F-P is 1920 x 1080 pixels.

What is the width of the Samsung PH43F-P?

The Samsung PH43F-P has a width of 959.7 mm.

What is the depth of the Samsung PH43F-P?

The Samsung PH43F-P has a depth of 29.9 mm.

How much storage capacity does the Samsung PH43F-P have?

The Samsung PH43F-P has 8 GB storage capacity.

Is the manual of the Samsung PH43F-P available in English?

Yes, the manual of the Samsung PH43F-P is available in English .

Is your question not listed? Ask your question here

No results