70 Users Manual
Video Problems No sound.
Verify if the mute check box is checked or the
volume is not turned down in the pop up menu by
clicking the speaker icon of the task bar.
System/BIOS behaves
erratically
If you caused an abnormal power interruption (i.e..
removing battery while on battery power), you may
cause BIOS data corruption.
Problem Action
Nothing appears on the LCD
panel when you turn on the
computer.
Adjust the brightness on a TFT LCD. Are yo u using
an external monitor? If so, press <Fn+F5> to return
to the LCD panel.
Error Message when
entering Power Management
while in M ultimonitor mode.
If the secondary mon itor is set to 2 56 colours, this
error message could appear. Change the colour of
the secondary monitor to ‘high colour (1 6 bit)’.
Nothing ap pears on the
external moni tor when yo u
switch the display to it.
Is the monitor properly connected to the computer?
Is the monito r’s power cord connected to an AC wall
outlet? Check the brightness and contrast con trols on
the monitor. Does the program appear on the LCD
panel instead of the external monito r? If so, press
<Fn+F5> to switch to the monitor. Try turni ng the
monitor off and on again.
Only the LCD Display works
when system returns from
Power management mode
while in M ultimonitor mode.
The system resets to the original BIOS setup when
the system returns from the power management
mode. If the Display m ode, in the Advanced men u of
BIOS setup is set to LCD, then only the LCD will be
turned on when the system wakes up. Set the Display
mode in the BIO S to Both to turn on the LCD &
CRT on wakeup.
The external monitor
displays flashes or waves.
Check the cables between the monitor and the
computer. Are they properly installed?
Cannot toggle between CRT
and LCD while playing the
3D game.
If you are using the Mu ltimonitor mode , you can not
use the <Fn+F5> key com bination and also you
cannot use this function in 3D games using
Direct-X.
Problem Action
Gemini (Windows XP) {No EMI}- Engli sh.fm Page 70 Monday, June 17, 200 2 1:28 PM
Need help?
Do you have a question about the Samsung and is the answer not in the manual?
Question and answer
Number of questions: 0