Using Your Computer for the First Time 15
Using the LCD Display This section will discuss using/changing the LCD displ ay:
The LCD display brightness adju stment is divided into 8 levels.
• The <Fn+F10> key combination decreas es LCD brightness.
• The <Fn+F11> key combination increases LCD brightness.
The LCD display will auto matically dim when you remove AC power to conserve
battery power. If required, adj ust the LCD brightness to a higher level when you are on
battery power, however this will decrease battery life.
LCD Cleaning:
Cleaning the L CD display should onl y be done with a soft clo th dampened with
denatured alcohol or a proprietary LCD screen cleaner.
Even if you change the default LCD displa y brightness settings, the defaults
listed above will be restored once you power off and then back on.
Notice: The limits of LCD manufacturing techno logy allow a max imum of 10
abnormal/bad pixels.
Tips for Using Your Computer The following inform ation helps you avoid potentia l problems as you use your
computer:
Do not try to disassemble your computer. Opening the system chassis voids
your warranty. Only an authorized manufacturer service center can rep lace or
add any parts inside the chassis.
• Follow all the instructions and cautions in your computer user documentation. • The LCD display has a polarized surface and can be damaged easily. To prevent damage, avoid touching the LCD display screen .
• Because a notebook computer is small and has restricted air flow around
components, it is more likely to overheat than a desktop co mputer. A fan inside
your computer runs when needed to help eliminate heat. Make sure the fan vent
on the right side of your computer is not blocked when you use the comp uter.
Occasionally check the vents and remove any accumulated dust on the outside.
Gemini (Windows XP) {No EMI}- Engli sh.fm Page 15 Monday, June 1 7, 2002 1:28 PM
Need help?
Do you have a question about the Samsung and is the answer not in the manual?
Question and answer
Number of questions: 0