A This occurs because the algorithm used to remove
the echo sound regards some of the sound as an
echo and removes this, as the recording is done by
playing the sound from the external microphone.
Af
ter selecting the Acoustic Echo Cancellation
option, please select the Play Device > Speaker >
Level tab and select Mute for the Microphone for a
normal recording.
Q
The <Wake On LAN> function
A <Wake On LAN> is a function that activates the
system from Sleep mode when a signal (such as
a ping or magic packet command) arrives over the
network (wired LAN).
Using the <Wake On LAN> Function
z ►ForWindows7
Click Start > Control Panel > Network and
Internet > Network and Sharing Center and
click on Change adapter settings in the left
menu pane.
►
ForWindowsVista
Click Start > Control Panel > Network and
Internet > Network and Sharing Center and
click Manage Network Connections in the left
pane.
x Right-click on the Local Area Connection and select
Properties.
cClick Congure> Power Management tab. Select
Allow this device to bring the computer out of
standby, then click OK. Restart the system.
—
If the system wake up from Sleep mode even though
there is no received signal, use the system after
disabling the <Wake On LAN> function.
—
The LAN LED may not be turned off if System is
shutdown without disabling the WOL (Wake on LAN)
option.
Wired Network (LAN) Related
Manual
View the manual for the Samsung NP-R522E here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Samsung NP-R522E or do you need help? Ask your question here
Need help?
Do you have a question about the Samsung and is the answer not in the manual?
Question and answer
Number of questions: 0