Samsung N870GA5007 manual

Samsung N870GA5007
7.1 · 1
PDF manual
 · 136 pages
English
manualSamsung N870GA5007
68 Using System Setup
Installed O/S: Select the operating system installed on your system which you
will use most commonly. An incorrect setting can cause the unexpected system
behavior.
PS/2 Mouse: Disabled prevents both the touchpad and external PS/2 port fro
functioning. Single mouse (default) enables the external PS/2 port or the touchpad,
and external PS/2 port has proirity. Dual Mouse allows the use of both the
touchpad and PS/2 port.
Screen Expansion: Enables or disables the Screen Expansion mode. If you set this
field to Enabled, the system expands VGA mode (DOS mode or 640x480 Graphic
mode) to use the full size of the LCD. If this field is Disabled VGA mode appears
as a 640x480 box in the LCD.
TV Out Mode: Select TV standard such as NTSC(default), PA .
Display Configuration: Enable you to set the default display. Options are LCD,
CRT and Both. Choose LCD to use the built-in display only, CRT to use an
external monitor only or BOTH to have both built-in and external displays used as
the dafault. If you select CRT and no external monitor is attached you will see no
display until you attach the external monitor. The default is LCD.
I/O Device Configuration: Opens the I/O Device Configuration submenu if you
press <Enter> when this field is highlighted. If you attempt to set two ports to the
same settings, the fields will be marked with asterisks.
The submenu contains these fields:
Serial port: Configures serial port. The options for this field are Enabled
(default), and Disabled. If you set this field to Enabled, you can set the Base I/
O Address field to 3F8 IRQ4 (default), 2F8 IRQ3, 3E8 IRQ4, or 2E8 IRQ3.
When the field is set to Enabled, the computer’s operating system uses the
default configuration or the configuration you choose. If you select Disabled,
you free up an IRQ for use by another device.
Infrared port: Configures the infrared port. The options for this field are
Enabled, and Disabled (default). If you set this field to Enabled, you can set
the Base I/O Address field and the Mode field and the Mode field. Settings for
the Base I/O Address are 3F8 IRQ4, 2F8 IRQ3 (default), 3E8 IRQ4, or 2E8
IRQ3. Mode FIR (fast infrared) enables you to set the DMA channel to 3 or 1.
When the Infrared port field is set to Enabled, the computer’s operating
system uses the default configuration or the configuration you choose. If you
select Disabled, you free up an IRQ for use by another device.
Parallel port: Configures the parallel port. The options for this field are
Enabled (default), and Disabled. If you set this field to Enabled, you can set

Manual

View the manual for the Samsung N870GA5007 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Samsung N870GA5007 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Samsung and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Samsung N870GA5007 specifications

Below you will find the product specifications and the manual specifications of the Samsung N870GA5007.

General
BrandSamsung
ModelN870GA5007
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung N870GA5007 below.

Is the manual of the Samsung N870GA5007 available in English?

Yes, the manual of the Samsung N870GA5007 is available in English .

Is your question not listed? Ask your question here

No results