Samsung N640CL2054 manual

Samsung N640CL2054
5.9 · 1
PDF manual
 · 120 pages
English
manualSamsung N640CL2054
Troubleshooting 97

Infrared Problems

If your computer’s operating system is Windows 98/ Me, you can enable and use
the infrared port. The Windows NT 4.0 operating system does not support infrared.
If you are unable to transfer files with the infrared port, check the following:
Make sure the setting of Serial port B is same to resource of
Windows\System\Properties\Network\IrDA driver.
The sending and receiving devices need to be on the same level vertically and
place the infrared ports on the sending and receiving devices face each other,
with no more than a 30 degree angle between the two infrared ports.
To use Infrared port, you have to set Serial Port B in BIOS setup to Enabled,
and Use Infrared port field in Control Panel, Infrared to Enabled.
Even if all the setting is done, Infrared driver may not support 4Mbps or the
file does not tansferred in ACPI Windows 98. This is the Windows 98’s
known problem. Use the Direct Cable Connection or hyper terminal for faster
speed in transfering the file, see Windows help to get information on its
setting method.You may hear the audio noise while using the ifrared port, set
Use Infrared port field in Control Panel, Infrared to Disabled to prevent
noise.

Modem Problems

My modem doesn't connect to services or disconnects during communication
If your modem has difficulty in connecting to on-line services and sustaining
communications, firstly check the quality of the phone line. Interference from
certain devices or poor line power conditions may degrade the quality of your
connection. Under these conditions gradually reduce the communication speed of
your modem until a reliable connection is achieved.
Check your on-line service provider. Service line or service may be halted.
When using a PBX phone system I can't dial on my modem.
If you use a PBX phone system you may need to press a number i.e. '9' to connect
to an external line, you should enter the following command before trying the
connection and check modem initialization.
ATX3&W
And add "9," as the external line prefix (in our example) of the phone number
when using the dial command "ATDT9, 123-4567".

Manual

View the manual for the Samsung N640CL2054 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Samsung N640CL2054 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Samsung and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Samsung N640CL2054 specifications

Below you will find the product specifications and the manual specifications of the Samsung N640CL2054.

General
BrandSamsung
ModelN640CL2054
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung N640CL2054 below.

Is the manual of the Samsung N640CL2054 available in English?

Yes, the manual of the Samsung N640CL2054 is available in English .

Is your question not listed? Ask your question here

No results