Samsung LC49J890 manual

Samsung LC49J890
6.6 · 2
PDF manual
 · 52 pages
English
manualSamsung LC49J890
42

DisplayPort Ver.

Select your DisplayPort version.

Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
If the monitor (when set to HDMI1, HDMI2, DisplayPort or MiniDP) is in power saving mode or is displaying the
message Check Signal Cable or power saving mode activates, press the JOG button to display the function-
button screen and then select the
button to display the On Screen Display (OSD). You can select 1.1, 1.2 or
1.2↑.
If setting the DisplayPort Ver. to 1.1, for the bandwidth limitation of the DisplayPort 1.1 protocol, the actual
maximum output refreshing rate of the display cards cannot achieve the level of 120 Hz/144 Hz.
If you select 1.2, the monitor can support up to 3840 x 1080 @ 144 Hz and 10-bit color input signals.

HDMI Mode

Select the HDMI mode to use.

The supportable device and resolution may differ depending on its version.
When the version is changed, the screen may blink.
If you set the HDMI Mode to 1.4, some high resolutions may not be supported because of bandwidth
limitation of the HDMI 1.4 protocol.
When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the
device.
Set the HDMI Mode to 1.4 when there is no sound output from the DVD connected to our product.
This menu is not available when PBP is enabled.

Source Detection

Select either Auto or Manual as the method to recognize input signal.

Key Repeat Time

Control the response rate of a button when the button is pressed.

Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once

when a button is pressed.

Power LED On

Configure the settings to enable or disable the power LED located at the lower part of the product.

Working: The power LED is on when the product is turned on.
Stand-by: The power LED is on when the product is turned off.

Reset All

Return all the settings for the product to the default factory settings.

Game Setting 1, Game Setting 2, and Game Setting 3 saved under Save Settings will not be changed.

Manual

View the manual for the Samsung LC49J890 here, for free. This manual comes under the category monitors and has been rated by 2 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Samsung LC49J890 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Samsung and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Samsung LC49J890 specifications

Below you will find the product specifications and the manual specifications of the Samsung LC49J890.

General
BrandSamsung
ModelLC49J890
Productmonitor
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung LC49J890 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Is the manual of the Samsung LC49J890 available in English?

Yes, the manual of the Samsung LC49J890 is available in English .

Is your question not listed? Ask your question here

No results