Samsung DW80R2031US manual

Samsung DW80R2031US
9.1 · 10
PDF manual
 · 102 pages
English
manualSamsung DW80R2031US

English - 25

PROBLEM POSSIBLE CAUSE SOLUTION
ozzle hole clogged with
food particles.
Clean the nozzle hole . See page 20.
The nozzle is blocked by a dish or
pot and cannot rotate.
After placing the dishes into the racks,
rotate the nozzles by hand to check
whether any of the dishes interfere with
them.
Water won’t
pump out of the
dishwasher.
The drain is clogged. Contact a qualif ied service technician to
remove any obstruction from the drain hose
and check the drain pump operation.
Has a bent upper
rack after loading
dishes.
The dishes are not loaded
properly.
Load your dishes as recommended.
(See page 14.)

06 troubleshooting

ozzle does not

rotate smoothly.

N
N s are s

View the manual for the Samsung DW80R2031US here, for free. This manual comes under the category dishwashers and has been rated by 10 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Samsung DW80R2031US or do you need help? Ask your question here

Need help?

Do you have a question about the Samsung and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 83
L
Lorena December 29, 2021

The light of the normal wash cycle is blinking and when I want to make it work, it only makes a noise indicating that it is draining.

The light of the normal wash cycle is blinking and when I want to make it work, it only makes a noise indicating that it is d...
zoom-in
View photo
This message has been automatically translated
L
LeShauntae HughesJanuary 23, 2023

I have a constant blinking light stuck on normal and it will not reset or start? I need assistance.

I have a constant blinking light stuck on normal and it will not reset or start? I need assistance.
zoom-in
View photo
2 comments
E
Emma of manua.lsOctober 24, 2023

If the Normal cycle light is continuously blinking and cannot be reset or started, try the following steps: 1. Turn off the dishwasher by pressing the Power button. 2. Wait for a few minutes and then turn it back on. 3. Select a different wash cycle based on the level of dirt on your dishes. You can try the Auto, Heavy, or Express 60 cycle. 4. If you have chosen the Sanitize option, wait for the water temperature to reach the sanitary temperature (over 156°F or 69°C). The "Sanitize" light will blink during this process and then stay on until the Sanitize option is completed. Press the Power button to turn off the "Sanitize" light. If the issue persists, consult the "Information Codes" section in the manual for more details on specific LED blinking patterns and their respective causes.

This answer is automatically generated
M
MichaelDecember 16, 2023

Mine is a leak detector issue. Wondering if I can reset it now

M
Michael VecchioneSeptember 15, 2022

I have a blinking blue lit under normal button. What is the issue?

1 comment
E
Emma of manua.lsDecember 25, 2023

The blinking blue light under the normal button on the Samsung DW80R2031US dishwasher indicates that the selected cycle is complete. The dishwasher powers off automatically when the cycle is finished. The light of the most recently finished cycle will be illuminated.

This answer is automatically generated
R
Rossy September 28, 2022

Why don't my dishes dry?

1 comment
E
Emma of manua.lsOctober 24, 2023

The possible cause for dishes not drying properly in the Samsung DW80R2031US dishwasher could be the following: 1. There is no rinse aid in the dispenser. Check the dispenser and add rinse aid. Use a liquid type rinse aid. 2. The temperature of the water is low when the dishwasher is running. Use rinse aid with the Sanitize option. 3. Too many dishes have been loaded. Proper loading of items can affect drying. Load your dishes as recommended. 4. Glasses and cups with concave bottoms hold water. This water may spill onto other items when you are unloading. After the cycle finishes, empty the lower rack first and then the upper rack. This will prevent water from dripping from the upper rack onto the dishes in the lower rack.

This answer is automatically generated
G
Gerard LongoriaAugust 5, 2022

The dishwasher is stuck in a "drain mode". First time using and unable to get it to work. Turned it on - set the desired wash type and closed door. The dishwasher after a few minutes goes into "Heavy" mode/light blinking - sounds like it wants to drain? First time using - is there a reset option? Am i doing something wrong or is it defective?

F
Felipe D'OssaDecember 29, 2022

When the dishwasher was installed, and the power on the pump did not stop always sound like running , how can I look for the problem

B
Bob nyeJanuary 29, 2023

The door spring no longer works. The door falls down very hard and heavy. How do I fix the door spring or closer?

J
Jolene VandenhaakFebruary 11, 2023

No power....started cycle and a few min later. Nothing. Water in bottom. Tried breaker. Maybe thermal fuse? Do i need a specific one to replace? Only 2 years old.

M
Marjorie JonesMarch 1, 2023

Why did my Heated Dry stop working? It was purchased in September, 2022. There is nothing in the booklet to address this issue.

The Samsung DW80R2031US is a dishwasher designed to efficiently clean dishes while reducing water usage. It has a capacity of up to 14 place settings, which makes it suitable for families or households that generate a moderate amount of dishes. The dishwasher's interior is made of stainless steel, which makes it durable and resistant to corrosion. Additionally, it has adjustable racks that can accommodate various dish sizes and shapes. The Samsung DW80R2031US features four wash cycles: Auto, Normal, Heavy, and Express 60. Each cycle has different settings tailored to different types of dishes. The dishwasher also has a delay start option that allows the user to set the dishwasher to run at a later time, which can help save energy during off-peak electricity hours. The dishwasher includes several features for convenience and efficiency. The StormWash system uses a powerful rotating spray jet to remove stubborn food particles, while the sanitize feature eliminates bacteria and germs. The dishwasher also has a digital leak sensor that detects a leak as small as 1.5 ounces and shuts off the dishwasher to prevent water damage. In summary, the Samsung DW80R2031US is a reliable and efficient dishwasher that offers multiple wash cycles and features for convenience and cleanliness. Its adjustable racks and sturdy interior make it a great choice for families and households of various sizes.

General
BrandSamsung
ModelDW80R2031US
Productdishwasher
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung DW80R2031US below.

What do I do about a smelly dishwasher?

In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner

Do you have to pre-rinse the dishes?

It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.

How much dishwashing detergent should I use?

The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.

How do I add softening salt to my dishwasher?

Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.

Why is my dishwasher not turning on?

Ensure that the dishwasher is properly connected to a power source and that the circuit breaker has not tripped. Additionally, check if the energy-saving feature is activated, as this may prevent the dishwasher from starting.

What should I do if the dishes come out dirty after a cycle?

Make sure you are loading the dishes correctly, allowing proper water flow. Check for any blockages in the spray arms and ensure they can freely rotate. Also, ensure that you are using the appropriate amount and type of detergent, as using too little or the wrong detergent can affect cleaning performance.

How do I troubleshoot a dishwasher leak?

Ensure that the dishwasher is level and not tilted, as this can cause water to spill out. Check for any damaged or faulty door gaskets as well. Additionally, inspect the water supply line and drain hose for any signs of leaks or blockages.

Why does my dishwasher make loud noises during operation?

Check if there are any loose items, such as utensils or small plates, that may be causing the noise. Ensure that the dishwasher is properly leveled and not resting against any cabinets or walls. Examine the spray arms and filter for any debris that might be causing noise or restriction in water flow.

How can I resolve a dishwasher that is not drying dishes properly?

Verify that the Rinse Aid dispenser is filled, as this aids in the drying process. Additionally, ensure that the "Heated Dry" option is selected, allowing the dishwasher to use heat during the drying cycle. Proper loading technique to allow air circulation around the dishes can also improve drying performance.

Is the manual of the Samsung DW80R2031US available in English?

Yes, the manual of the Samsung DW80R2031US is available in English .

Is your question not listed? Ask your question here

No results