television using the SCART cable if the appropriate
input is available on the television.
1.Connect the RF cable as shown.
2.Connect one end of the SCART cable to the AV1
socket on the rear of the HDD & DVD RECORDER.
3.Plug the other end into the appropriate connector on
the television.
4.Plug in the HDD & DVD RECORDER and TV
5.Turn on the HDD & DVD RECORDER and TV.
6.Press the INPUT SEL.button on your TV remote
control until the Video signal from the HDD & DVD
RECORDER appears on the TV screen.
To RF IN
To TV
RF Cable
To ANT INPUT
■
The RF cable connection of this product sends
only signals of TV.You must connect SCART
cable or Audio/Video cables to watch a DVD
from your HDD & DVD RECORDER.
■
TV mode :Press the TV/DVDbutton on
remote control, then “TV” appear on Front
LED
display (or turn off HDD & DVD RECORDER)
.
Then you can watch programmes received
through TV.
NOTE
3
2
1
external device (VCR/Satellite receiver)
HR730-734_XEU_01~56 9/9/06 12:38 PM Page 19
Manual
View the manual for the Samsung DVD-HR730 here, for free. This manual comes under the category DVD players and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Samsung DVD-HR730 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung DVD-HR730 below.
What is the weight of the Samsung DVD-HR730?
The Samsung DVD-HR730 has a weight of 3900 g.
What certifications does the Samsung DVD-HR730 have?
The Samsung DVD-HR730 has the following certifications: CE, SEMKO.
How can I best clean my DVD player?
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Is the manual of the Samsung DVD-HR730 available in English?
Yes, the manual of the Samsung DVD-HR730 is available in English .
Need help?
Do you have a question about the Samsung and is the answer not in the manual?
Question and answer
Number of questions: 0