Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
―
If the monitor (when set to HDMI1, HDMI2 or DisplayPort) is in power saving mode or is displaying the
message Check Signal Cable or power saving mode activates, press the JOG button to display the function-
button screen and then select the
button to display the On Screen Display (OSD). You can select 1.1, 1.2 or
1.2↑.
―
If setting the DisplayPort Ver. to 1.1, for the bandwidth limitation of the DisplayPort 1.1 protocol, the actual
maximum output refreshing rate of the display cards cannot achieve the level of 120 Hz/144 Hz.
―
If you select 1.2↑, the monitor can support up to 2560 x 1440 @ 144 Hz and 10-bit color signals.
HDMI Mode
Select the HDMI mode to use.
―
The supportable device and resolution may differ depending on its version.
―
When the version is changed, the screen may blink.
―
If you set the HDMI Mode to 1.4, some high resolutions may not be supported because of bandwidth
limitation of the HDMI 1.4 protocol.
―
When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the
device.
―
Set the HDMI Mode to 1.4 when there is no sound output from the DVD connected to our product.
Source Detection
Select either Auto or Manual as the method to recognize input signal.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once
when a button is pressed.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
•Working: The power LED is on when the product is turned on.
•Stand-by: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.
―
Game Setting 1, Game Setting 2, and Game Setting 3 saved under Save Settings will not be changed.
Manual
View the manual for the Samsung C27HG70QQU here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Samsung C27HG70QQU or do you need help? Ask your question here
Windows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung C27HG70QQU below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
What is the screen size of the Samsung C27HG70QQU?
The screen size of the Samsung C27HG70QQU is 27 ".
What is the screen resolution of the display of the Samsung C27HG70QQU?
The screen resolution of the Samsung C27HG70QQU is 2560 x 1440 pixels.
Is the manual of the Samsung C27HG70QQU available in English?
Yes, the manual of the Samsung C27HG70QQU is available in English .
Need help?
Do you have a question about the Samsung and is the answer not in the manual?
Question and answer
Number of questions: 0