To use the Internet using the HUB Monitor’s LAN network, configure the network settings as follows
according to the type of IP you will be using.
2.5.1 Dynamic IP
The dynamic IP address mode automatically configures the network settings on the PC using data sent
by a server, which allots an IP address. This is possible, owing to the “DHCP (Dynamic Host
Configuration Protocol)” service. The service consists of three steps: an IP address allotment request is
sent to the DHCP server when the PC boots up, the DHCP server that received the request transmits
network information such as the IP address to the PC, and the transmitted network information is
automatically registered to the network settings on the PC. The DHCP service is convenient and useful
especially in an environment where multiple PCs are used. Theoretically, the IP address changes each
time the PC boots up (or an IP allotment request is sent); in many cases, however, the existing IP address
is re-allotted. An Internet router performs two roles: creating a private IP address (NAT service) and
automatically allotting the IP address to each PC (DHCP service) at the same time.
When using your HUB Monitor’s or notebook PC’s LAN network, ensure you insert a LAN cable into
only one device. Otherwise, a system crash may occur.
Dynamic IP User
1 To use a dynamic IP address, connect a LAN to your HUB Monitor.
2Next, go to the network settings menu and activate the HUB Monitor’s network device (select
“Use”).
Go to Control Panel Network and InternetNetwork and Sharing Center Change
adapter settings. Next, right-click on the HUB Monitor’s network device (marked “LAN9512/
LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”) and select Use.
3Using the network properties menu, check that the IP address mode for the HUB Monitor’s network
device is set to Auto.
→ →
→
Manual
View the manual for the Samsung C27A550U here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the Samsung C27A550U or do you need help? Ask your question here
1280 x 960,1024 x 768 (XGA),1280 x 1024 (SXGA),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),640 x 480 (VGA),800 x 600 (SVGA)
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samsung C27A550U below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
What is the screen size of the Samsung C27A550U?
The screen size of the Samsung C27A550U is 27 ".
What is the screen resolution of the display of the Samsung C27A550U?
The screen resolution of the Samsung C27A550U is 1920 x 1080 pixels.
Is the manual of the Samsung C27A550U available in English?
Yes, the manual of the Samsung C27A550U is available in English .
Need help?
Do you have a question about the Samsung and is the answer not in the manual?
Question and answer
Number of questions: 0