View the manual for the Samson Expedition XP300 here, for free. This manual comes under the category speakers and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Samson Expedition XP300 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Samson Expedition XP300.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Samson Expedition XP300 below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
1. Adjust the bass and treble frequencies on each channel of the XP300 speaker to fine-tune the tonal characteristics of the signal. 2. If the audio sounds muddy, reduce the low-frequency (LF) control on the channel. 3. If the audio sounds dull, increase the high-frequency (HF) control on the channel. 4. Experiment with the EQ settings by listening to how the mix sounds in the room and making adjustments to your liking.
1. Position the speakers on the floor or on standard speaker stands. 2. Ensure the XP300's POWER switch is set to the OFF position. 3. Turn each channel LEVEL and MASTER volume controls fully counterclockwise to the "0" position. 4. Connect the mixer's LEFT SPEAKER OUT to the left speaker's input and the RIGHT SPEAKER OUT to the right speaker's input using the included speaker cables. 5. Connect microphones, instruments, and MP3 player to the mixer's appropriate jacks. 6. If using a Samson XPD Wireless Microphone system, plug the receiver into the CH 2 USB jack. 7. Switch on all equipment connected to the XP300 before turning the XP300's POWER switch to the ON position. 8. Adjust the MASTER level control to halfway up and adjust the LEVEL controls for each channel. 9. Monitor the LIMITER indicator and adjust the MASTER volume accordingly to prevent constant lighting.
To troubleshoot Bluetooth connectivity issues on the Samson Expedition XP300 speaker, follow these steps: 1. Turn down all channel LEVEL controls to 0. 2. Power on the XP300 and your Bluetooth device, then press the PAIR button on the XP300 mixer to make the speaker discoverable. 3. Set your Bluetooth device to "discover" available devices in its settings. 4. Select the "Samson XP300" device from the Bluetooth device list. 5. If prompted for a passkey, enter digits 0000 and press OK. 6. Wait for the Bluetooth indicator to quickly flash blue as the XP300 connects to your device. 7. Pairing is complete when the indicator turns steady blue, allowing you to stream audio. 8. Adjust the XP300 BLUETOOTH channel LEVEL control to your desired audio level while playing music on your Bluetooth device.
Yes, the manual of the Samson Expedition XP300 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Samson and is the answer not in the manual?
Question and answer
Number of questions: 2Can I hook up only one speaker and safely use this system?
What is the DC power input level of this xp 300?