Salicru SPS.700.ONE manual

Salicru SPS.700.ONE
8.9 · 3
PDF manual
 · 16 pages
English
manualSalicru SPS.700.ONE

2 SALICRU

Manual

View the manual for the Salicru SPS.700.ONE here, for free. This manual comes under the category uninterruptible power supplies (UPSs) and has been rated by 3 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Salicru SPS.700.ONE or do you need help? Ask your question here

Need help?

Do you have a question about the Salicru and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Salicru SPS.700.ONE specifications

Below you will find the product specifications and the manual specifications of the Salicru SPS.700.ONE.

General
BrandSalicru
ModelSPS.700.ONE | 662AA000002
Productuninterruptible power supply (UPS)
EAN8436035920884
LanguageEnglish
FiletypeUser manual (PDF)
Features
Output power capacity0.7 kVA
Input frequency50/60 Hz
Output power360 W
Response time6 ms
Noise level40 dB
Input operation voltage (min)220 V
Input operation voltage (max)240 V
Output operation voltage (min)220 V
Output operation voltage (max)240 V
Surge protection featuresNetwork, Telephone
Audible alarm(s)Yes
UPS topologyLine-Interactive
Number of input phases1
Number of output phases1
Surge protectionYes
Power protection featuresOvercharge
WaveformSine
Audible alarm modesAlarm when on battery, Fault, Low battery alarm, Overload alarm, Battery replacement
Battery
Battery technologySealed Lead Acid (VRLA)
Battery recharge time6 h
Typical backup time at full load20 min
Off-mode chargingYes
Cold startYes
Design
Product colorRed
LED indicatorsYes
Form factorCompact
SafetyEN-IEC 62040-1-1; EN-IEC 60950-1
Weight & dimensions
Weight4250 g
Width100 mm
Depth287 mm
Height142 mm
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 90 %
Operating altitude0 - 2400 m
Ports & interfaces
AC outlets quantity2 AC outlet(s)
AC outlet typesType F
USB 2.0 ports quantity1
Number of type F outputs2
USB portYes
Packaging data
Quick installation guideYes
Warranty cardYes
Cables includedUSB cable
Other features
Battery typePb-Ca
Logistics data
Quantity per master (outer) case4 pc(s)
Quantity per pallet64 pc(s)
Master (outer) case weight19600 g
Master (outer) case width593 mm
Master (outer) case length350 mm
Master (outer) case height240 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Salicru SPS.700.ONE below.

What is the weight of the Salicru SPS.700.ONE?

The Salicru SPS.700.ONE has a weight of 4250 g.

What is the height of the Salicru SPS.700.ONE?

The Salicru SPS.700.ONE has a height of 142 mm.

How long does it take to charge the battery of the Salicru SPS.700.ONE?

It takes 6 h to charge the battery of the Salicru SPS.700.ONE.

What is the width of the Salicru SPS.700.ONE?

The Salicru SPS.700.ONE has a width of 100 mm.

What is the depth of the Salicru SPS.700.ONE?

The Salicru SPS.700.ONE has a depth of 287 mm.

Does Salicru SPS.700.ONE have LED indicators?

Yes, Salicru SPS.700.ONE has LED indicators, making it easy for the user to monitor its status and performance.

What is the output power capacity of Salicru SPS.700.ONE?

The output power capacity of Salicru SPS.700.ONE is 0.7 kVA, providing a decent amount of power for connected devices.

How many AC outlets does Salicru SPS.700.ONE have?

Salicru SPS.700.ONE has 2 AC outlets, allowing users to connect multiple devices to the UPS.

What type of battery technology does Salicru SPS.700.ONE use?

Salicru SPS.700.ONE uses Sealed Lead Acid (VRLA) battery technology, which is known for its reliability and maintenance-free operation.

What is the response time of Salicru SPS.700.ONE?

The response time of Salicru SPS.700.ONE is 6 ms, ensuring a quick and seamless transition to battery power in case of a power outage.

How can I identify the different components and indicators on the unit diagram key?

To identify the different components and indicators on the unit diagram key of the Salicru SPS.700.ONE uninterruptible power supply (UPS), follow these steps: 1. Power cable with a pin on the end. 2. IEC socket used to power the unit (only in models without the power supply cable). 3. Output sockets. 4. USB HID communication port. 5. Input protection via a circuit breaker or fuse, depending on the model. 6. Fan of the unit (only in models SPS.1500.ONE and SPS.2000.ONE). 7. Unit start and stop button. 8. Red LED lit. The unit is in the Fail-safe Mode. This LED also warns the user when the unit charge level is too low, indicated by flashing with the same modulation as the acoustic alarm. 9. Flashing yellow LED. The unit is in the Battery Mode, providing output power supply from the internal battery. 10. Green LED on. The unit is in the AC Mode, providing output power supply from the input voltage. Please note that these components and indicators may vary depending on the model of the Salicru SPS.700.ONE UPS.

What is the operating principle of the Salicru SPS.700.ONE UPS?

The Salicru SPS.700.ONE uninterruptible power supply (UPS) operates based on line-interactive technology, providing protection for both domestic and professional IT environments. It uses AVR Boost&Buck technology to stabilize the supply voltage, offering higher protection for connected loads while reducing the use of UPS batteries. In the event of a power outage, the UPS supplies electrical power from its batteries to ensure uninterrupted operation. It also features built-in communication functions, allowing communication between the UPS and computer systems through the USB HID port and compatible monitoring software for Windows, Linux, Unix, and Mac. The UPS has several key features, including line-interactive technology, high reliability controlled by a microprocessor, USB HID interface, monitoring software compatibility, a single on/off button for convenience, protection against overloads, short-circuits, and transients, a smart battery charger that reduces recharging time, the ability to recharge batteries with the equipment switched off, a cold start function using the batteries, and automatic start-up after the input voltage is reconnected. Overall, the Salicru SPS.700.ONE UPS ensures reliable power protection and efficient operation for various IT environments.

How do I check if the UPS has the necessary features, such as line-interactive technology and protection against overloads and short-circuits?

To check if the Salicru SPS.700.ONE UPS has the necessary features, such as line-interactive technology and protection against overloads and short-circuits, follow these steps: 1. Look for the unit diagram key in the manual. It will show you the different components of the UPS, including the input protection and output sockets. 2. Check if the UPS has line-interactive technology. The manual states that the Salicru SPS.700.ONE is an uninterruptible power supply system with line-interactive technology. This technology provides the best protection solution for both domestic and professional IT environments. 3. Verify the protection features. The manual mentions that the UPS offers protection against overloads, short-circuits, and transients. This ensures that your connected devices are safeguarded from electrical issues. By following these steps, you can easily determine if the Salicru SPS.700.ONE UPS has the necessary features, including line-interactive technology and protection against overloads and short-circuits.

Is the manual of the Salicru SPS.700.ONE available in English?

Yes, the manual of the Salicru SPS.700.ONE is available in English .

Is your question not listed? Ask your question here

No results