Salicru SPS 16 ATS manual

Salicru SPS 16 ATS
7.5 · 1
PDF manual
 · 16 pages
English
manualSalicru SPS 16 ATS

14 SALICRU

7. MAINTENANCE, wARRANTY ANd SERvICE.

7.1. UPS TROUBLESHOOTING GUIDE.

Tab. 7 shows a summary of the faults that can occur and the

possible causes and solutions. If it is not possible to solve the

problem with this help, consult our T.S.S.

If it is necessary to contact our Technical Service and Support

T.S.S, provide the following information:

Device model and serial number.

Date on which the issue occurred.

Full description of the issue, including information provided

by the LCD display or LEDs and state of the alarm.

Power supply conditions, type of load and level of load

applied, ambient temperature, ventilation conditions.

Any other information considered relevant.

7.2. WARRANTY CONDITIONS.

7.2.1. Terms of the warranty.

On our website you will find the warranty conditions for the

product you have purchased where you can also register it. It is

recommended to do so as soon as possible to include it in the

database of our Technical Service and Support (T.S.S.). Among

other advantages, it will streamline any regulatory procedures

for the intervention of T.S.S. in the event of a fault.

7.2.2. Exclusions.

Our company will not be bound by the warranty if it notices

that the defect in the product does not exist or was caused

by improper use, negligence, improper installation and/or

verification, attempts at unauthorized repair or modification, or

any other cause beyond the intended use, or by accident, fire,

lightning or other hazards. Nor shall it cover any compensation

for damages.

7.3. TECHNICAL SERVICES NETWORK.

Information about our national and international Technical

Service and Support (T.S.S.) centres can be found on our

website.

Symptom Possible cause Solution
SPS ATS is off.
Device not connected to power mains.
Check that device’s two inputs are connected and
preferably to different AC power mains.
Power mains abnormal.
Check voltage and frequency of both inputs against
rated voltage and frequency values and ranges (see
device nameplate) and factory parameters indicated
in chapter 8.
Internal electronics damaged. Contact the distributor, seller or, failing that, our T.S.S.
Power is supplied to load, but control panel remains
off.
Internal electronics damaged. Contact the distributor, seller or, failing that, our T.S.S.
Error code E16 on the screen. Overload.
Reduce load connected to output sockets. Depending
on level of overload, if it persists and after some time,
the device may become locked.
Error code E30 on the screen. Overload exceeded in time.
The device will lock and it will be necessary to stop
the system completely and restart it.
Error code E33 on the screen. Communication connection abnormal Contact the distributor, seller or, failing that, our T.S.S.

Tab. 7. Troubleshooting guide.

View the manual for the Salicru SPS 16 ATS here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Salicru SPS 16 ATS or do you need help? Ask your question here

Need help?

Do you have a question about the Salicru and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Salicru owners to provide you with a good answer.

Number of questions: 0

General
Salicru
SPS 16 ATS | 658CB000001
Not categorized
8436035921911
English
User manual (PDF)
Power
Input operation voltage (min)150 V
Input operation voltage (max)300 V
AC input frequency50 - 60 Hz
Output operation voltage (min)200 V
Output operation voltage (max)240 V
Output current16 A
Performance
Efficiency99 %
LED indicators
Design
Form factorRackmount
Rack capacity1U
Product colourBlack, Grey
DisplayLCD
SafetyIEC-60950-1
CertificationEN-55022; EN-55024, ISO 9001 & ISO 14001
Ports & interfaces
AC inlet type2 x C20 coupler
AC outlets quantity9 AC outlet(s)
AC outlet typesC13 coupler, C19 coupler
USB port
RS-232 ports2
SmartSlot
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Weight & dimensions
Width438 mm
Depth275 mm
Height44 mm
Weight4000 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Salicru SPS 16 ATS below.

Is your question not listed? Ask your question here

No results