Salicru SPS 16 ATS manual

Salicru SPS 16 ATS
7.5 · 1
PDF manual
 · 16 pages
English
manualSalicru SPS 16 ATS
13
Active icon on
display
Event
+
Input A voltage, frequency or both abnormal or
failure.
+
Input B voltage, frequency or both abnormal or failure.
+
Output overload. Alarm message E16 is also
displayed on the screen.
+
Output overload with time exceeded. Alarm message
E30 is also displayed on the screen.
The device will lock and it will be necessary
to stop the system completely and restart it.
Alarm: Abnormal cabinet temperature or device fault.

Tab. 4. List of possible audible alarms

6.5. inFormaTion rePresenTed by The disPlay.

On the LCD screen of the control panel, you can display

the icons represented in Fig. 6 and functionally defined in

Tab. 5.

Symbol Description / function
Input A voltage or frequency abnormal or
failure.
Input B voltage or frequency abnormal or
failure.
Overload.
Alarm: Input A or B voltage and/or frequency
outside the range, abnormal cabinet
temperature or device fault.
Alarm activated.
Alarm deactivated.
The LCD display shows the parameter
reading origin by means of a signal in the
form of a pointer located below the icons of
input A, input B or the output to loads.
A semi-oval arc with a pointer at its end
indicates the origin of the output voltage.
Digits that show the value and its reading
parameter (voltage, current, frequency or %
of load connected to the output) from any
of the sources (input A, input B or output to
loads).

Tab. 5. Description of the icons shown on the display.

6.6. led indiCaTions.

Ref. LED Error or failure description
f Input A
- On: Normal input frequency and voltage.
- Off: Abnormal input voltage and frequency.
g Input B
- On: Normal input frequency and voltage.
- Off: Abnormal input voltage and frequency.
h Error
- On: System alarm, fault or abnormality.
- Off: System normal.

Tab. 6. LED indications message.

SPS ATS AUTOMATIC TRANSFER SYSTEMUSER MANUAL

View the manual for the Salicru SPS 16 ATS here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Salicru SPS 16 ATS or do you need help? Ask your question here

Need help?

Do you have a question about the Salicru and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Salicru owners to provide you with a good answer.

Number of questions: 0

General
Salicru
SPS 16 ATS | 658CB000001
Not categorized
8436035921911
English
User manual (PDF)
Power
Input operation voltage (min)150 V
Input operation voltage (max)300 V
AC input frequency50 - 60 Hz
Output operation voltage (min)200 V
Output operation voltage (max)240 V
Output current16 A
Performance
Efficiency99 %
LED indicators
Design
Form factorRackmount
Rack capacity1U
Product colourBlack, Grey
DisplayLCD
SafetyIEC-60950-1
CertificationEN-55022; EN-55024, ISO 9001 & ISO 14001
Ports & interfaces
AC inlet type2 x C20 coupler
AC outlets quantity9 AC outlet(s)
AC outlet typesC13 coupler, C19 coupler
USB port
RS-232 ports2
SmartSlot
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Weight & dimensions
Width438 mm
Depth275 mm
Height44 mm
Weight4000 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Salicru SPS 16 ATS below.

Is your question not listed? Ask your question here

No results