Name: Salicru SPS 16 ATS
Brand: Salicru
SKU: 1339747
Rating: 75 (1 reviews)

manualSalicru SPS 16 ATS

5 1

9 6

2 1

3 4

Fig. 5. DB9 connectors for RS232 and interface to relays and

USB connector.

Pin # description Input / Output

1 - -

2 TXD Output

3 RXD Input

4 - -

5 GND Earth

6 - -

7 - -

8 - -

9 - -

Tab. 1. Pinout of the DB9 connector, RS232.

Pin # Signal

1 V BUS-

2 D –

3 D +

4 GND

Tab. 2. Pinout of the USB connector.

Pin # description Input / Output

1 Common, relay 3 -

2 Relay 3 Overload

3 Relay 4 Maximum overload time

4 Common, relay 4 and 5 -

5 Relay 5 Overtemperature

6 Common, relay 1 -

7 Relay 1 Input A abnormal

8 Common, relay 2 -

9 Relay 2 Input B abnormal

Tab. 3. Pinout of the DB9 connector, interface to relays

5.3.5. Smart slot for the integration of an electronic

communication unit, SNMP.

• The corresponding documentation is supplied with each

option. Read it before starting installation.

Installation.

• Remove the protective cover from the device’s slot.

• Take the corresponding electronic unit and insert it into the

reserved slot. Make sure that it is properly connected, for

which it is necessary to overcome the resistance caused in

the connector located in the slot.

• Make the necessary connections in the terminal block or

connectors available according to each case.

• For more information, contact our T.S.S. or our nearest

distributor.

5.3.6. Management and monitoring software.

• Through the RS232 or USB port and the free management

and monitoring software, which can be downloaded from our

Website, it is possible to display the values of the different

parameters of Input A, Input B and Output on a PC screen.

The software can be downloaded in two different ways.

 Ideally by registering the product. This facilitates and

streamlines warranty procedures in the event of inci-

dents:

– Enter the following in the browser's address bar:

https://support.salicru.com.

– Click the ‘Enter’ key. The Website’s On-Line Support

page will be displayed on the screen.

– Register as a user.

– Register the product purchased with all of the

details requested.

– Documentation relating to the model and manage-

ment and monitoring software, with the available

operating systems will be displayed.

Download the required software and install it.

 Directly through the Website.

– Enter the following in the browser's address bar:

https://www.salicru.com/

– Click the ‘Enter’ key. The page shows two sections

on the screen. Search for the device series within

them or via the ‘Product’ header menu, which is

structured in the same way.

– When accessing the device series, you will see

below the illustrations links to the different

documentation and below these, some tabs, among

them the one marked Software.

Select the Software with the required operating

system, download it and install it.

SPS ATS AUTOMATIC TRANSFER SYSTEMUSER MANUAL

View the manual for the Salicru SPS 16 ATS here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Salicru SPS 16 ATS or do you need help? Ask your question here

Need help?

Do you have a question about the Salicru and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Salicru owners to provide you with a good answer.

Number of questions: 0

General

	Salicru
	SPS 16 ATS \| 658CB000001
	Not categorized
	8436035921911
	English
	User manual (PDF)

Power

Input operation voltage (min)	150 V
Input operation voltage (max)	300 V
AC input frequency	50 - 60 Hz
Output operation voltage (min)	200 V
Output operation voltage (max)	240 V
Output current	16 A