SafeHome IP601W manual

SafeHome IP601W
9.3 · 1
PDF manual
 · 72 pages
English
manualSafeHome IP601W

www.safehome.dk

2

Table of Contents

0. Before you start 3
Package Contents 3
System Requirements 3
System architecture 3
Internet 3
1. Product 4
Front 4
Back 4
Functions 4
2. Hardware installation and configuration 5
Prepare the camera 5
Installing software 5
3. Log into the camera from the browser 8
4. Control panel 9
5. Administrators Menu 10
Device Info 10
Alias Settings 10
Date & Time Settings 10
User Settings 10
Multi-Device Settings 10
Basic Network Settings 11
Wireless Lan Settings 11
ADSL Settings 11
UPnP Settings 12
Setting up Email 12
FTP Service Settings 13
Alarm Service Settings 14
PTZ Settings (Pan Tilt Zoom) 15
Decoder Settings 15
Device Firmware Upgrade 15
Backup & Restore Settings 15
Reboot Device 15
Log 15
Back 15
6. Accessing the camera from the Internet
outside your home
Static IP address 16
Dynamic IP address 17
DDNS Service Settings 17
7. FAQ - Troubleshooting 18
Reset 18
8. Disclaimer 18

Manual

View the manual for the SafeHome IP601W here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the SafeHome IP601W or do you need help? Ask your question here

Need help?

Do you have a question about the SafeHome and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

SafeHome IP601W specifications

Below you will find the product specifications and the manual specifications of the SafeHome IP601W.

General
BrandSafeHome
ModelIP601W
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the SafeHome IP601W below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

How can I troubleshoot issues with the hardware installation and configuration of the camera?

To troubleshoot hardware installation and configuration issues with the SafeHome IP601W security camera, follow these steps: 1. Connect the camera to the router or switch using an RJ-45 network cable. 2. Plug the power adapter into the camera and then into a power outlet using the provided adapter. 3. Wait for about 30 seconds for the camera to start up and be detected by the software on your computer. 4. Ensure that the camera head rotates and stops in position, with the network LED lights glowing steadily to indicate a correct connection. 5. Install the required software by inserting the CD into the CD-ROM drive or downloading it from the SafeHome website. 6. Follow the on-screen instructions to complete the software installation process. If further troubleshooting is needed, visit the SafeHome website for updated FAQs and instructions on resetting the camera.

What steps should I take if I encounter difficulties logging into the camera from my browser?

To troubleshoot difficulties logging into the SafeHome IP601W camera from your browser, follow these steps: 1. Use the IP Camera Tool or enter the camera's IP address directly into your browser. 2. Choose your web browser and enter the default username as "admin" with no password. 3. Access the camera's control panel to change the username and password if needed. 4. If accessing the camera over the Internet, log in using the provided address on the camera label. 5. Ensure the camera is set up for remote access and check the DDNS settings. 6. If connection issues persist, enable UPnP settings and configure port forwarding on your router. 7. Consider using a DDNS service for dynamic WAN IP addresses to maintain connectivity. 8. Register on a DDNS service, configure settings on the camera, and access the camera using the assigned domain name and port number in your browser.

How do I resolve access issues when trying to view the camera from the Internet outside my home despite configuring port forwarding and enabling UPnP?

To resolve access issues when trying to view the SafeHome IP601W camera from the Internet despite configuring port forwarding and enabling UPnP, follow these steps: 1. Ensure the router is port forwarding to the camera by checking the UPnP menu in the administrator settings. Make sure the UPnP status shows "success" after clicking the "Submit" button. 2. If UPnP is not successful, enable UPnP in the router settings or manually set up port forwarding in the router. 3. Use a static IP address provided by your ISP and enter the IP address followed by the chosen port number in the browser's address bar to access the camera from outside. 4. If you have a dynamic IP address, use a DDNS service to connect to the camera. Register on a DDNS website, set up DDNS service settings in the camera menu, and ensure UPnP status is "Succeed" in the router settings. 5. Access the camera using the chosen domain name and port number in the browser address line.

Is the manual of the SafeHome IP601W available in English?

Yes, the manual of the SafeHome IP601W is available in English .

Is your question not listed? Ask your question here

No results