Römer Kidfix XP manual

Römer Kidfix XP
8.6 · 1
PDF manual
 · 2 pages
English
manualRömer Kidfix XP
08
01 02
03
04
10
12
14
13
07
05
06
11
Belt guide (bright red)Release knob XP-SICT (only KIDFIX XP SICT)Belt holder (dark red)ISOFIX insert guidesISOFIX fastening points (vehicle)ISOFIT locking arms
01
02
03
04
05
06
07
Backrest Seat cushionISOFIT settings keySafety buttonStorage compartment
08
09
10
XP-PAD
11
Adjusting handle of the headrest
12
13
14
Removing the seat cover
1. Moving the headrest of the vehicle seat into the top
position.
2. Unhook the cover hook
19
on the rear of the backrest.
3. Remove the top part of the cover and fold it forwards to
the seat surface.
4. Unhook the cover hook
19
on the front of the backrest.
5. Pull the cover off of the seat surface.
Removing the headrest cover
6.
Unhook the cover loop
20
on the rear of the backrest.
7. Unhook the cover hook
19
on the front of the backrest.
8.
Pull off the cover of the headrest
22
.
The cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-tting the cover
Proceed in reverse order to put on the cover.

5. CARE AND MAINTENANCE

19
20
19
19
22
09

2. INTRODUCTION

We are delighted that our
KIDFIX XP / KIDFIX XP SICT
can safely accompa-
ny your child through a new stage in its life.
In order to protect your child correctly, the
KIDFIX XP/
KIDFIX XP SICT
must always be used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
BRITAX RÖMER
Kindersicherheit GmbH
Blaubeurer Straße 71
D-89077 Ulm
Germany
T.: +49 (0) 731 9345-199/-299
F.: +49 (0) 731 9345-210
E.: service.de@britax.com
www.britax.eu
BRITAX EXCELSIOR
LIMITED
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
E.:
service.uk@britax.com
www.britax.eu
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
16
15
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
agonal seat belt
16
in dark red and the lap belt
15
in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.

4. USE IN THE VEHICLE

Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems
(see type list) and in vehicles with a 3-point belt.
Please nd the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle.
The KIDFIX XP / KIDFIX XP SICT is approved for two different methods of installation:
Symbol Installation type Approval type Section
with the ISOFIT locking arms on the
ISOFIX fastening points in the vehi-
cle. Observe the vehicle type list.
semi-universal
a)
9A
with the vehicle's 3-point seatbelt
universal
9B
a)
This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version
can be obtained from us or from www.britax.eu / www.roemer.eu.
You can use your child safety seat as follows:
In the direction of travel Yes
Against the direction of travel no
1)
with 2-point belt no
with 3-point belt
2)
Yes
with ISOFIX fastening points
(between seat surface and
backrest)
Yes
on front passenger seat Yes
3)
on outer rear seat Yes
on centre rear seat (with
3-point belt)
Yes
4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only
if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect
of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15–36 kg

3. Certification

BRITAX RÖMER Child safety seatTesting and certicationIn accordance with ECE* R 44/04Group Body weightKIDFIX XP KIDFIX XP SICT
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certied according to
the requirements of the European Standard for Child Safety Equipment (ECE
R 44/03). The seal of approval E (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER! This approval will be invalidated if you make any modications
to the child safety seat. Only the manufacturer is permitted to
make modications to the child safety seat. The child seat is
approved for use both with and without XP-PAD.
WARNING! Use the KIDFIX XP / KIDFIX XP SICT exclusively for secur-
ing your child in your vehicle. It is in no way suitable as a
seat or toy in the home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.

PAGE I

6. DISASSEMBLY AND DISPOSAL

Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulls im-
portant functions to ensure the smooth operation of the system. Replacement seat
covers are available from your dealer or from an ADAC ofce.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover.
• The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use
any caustic cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.

1. PRODUCT OVERVIEW

1. Operate the release key of your vehicle seat buckle
2. Open the XP-PAD
11
on the Velcro fastener and
remove the diagonal belt
16
.
3. Open the dark red belt holder
03
by pressing back-
wards the key on the belt holder
03
and unthread-
ing the diagonal belt
16
.
Only for installation type A (ISOFIT):
4. To release the ISOFIT fastening, release the green
safety button
08
and the red release button
07
rst
on the one and the on the other side opposite on
another.
The child safety seat can now be removed.
DANGER! the child safety seat must always be
secured when it is in the vehicle, even if no child is
being transported.
03
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the
corresponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
16
11
0807
REMOVAL:
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
TIP! The XP-PAD can remained applied for easier use on the diagonal
belt of your vehicle, the diagonal belt must be retensioned before every
journey; see: Section10 step 12 [page II].

KIDFIX XP

KIDFIX XP SICT

User instructions
www.britax.eu
2000010039 05/16
GB

15 kg - 36 kg

(~4 Y - 12 Y)

Manual

View the manual for the Römer Kidfix XP here, for free. This manual comes under the category Car seats and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Römer Kidfix XP or do you need help? Ask your question here

Need help?

Do you have a question about the Römer Kidfix XP and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Römer Kidfix XP owners to provide you with a good answer.

Number of questions: 0

Römer Kidfix XP specifications

Below you will find the product specifications and the manual specifications of the Römer Kidfix XP.

General
Brand Römer
Model Kidfix XP | 4000984134421
Product Car seat
Language English
Filetype Usermanual (PDF)
Features
Car seat group 2-3 (15 - 36 kg; 3.5 - 12 years)
Belt fastening type 3-point
Mounting type ISOFIX
Product colour Black,Red,White
Side protection
Ergonomic design
Adjustable backrest
Weight & dimensions
Height (min) 670 mm
Height (max) 850 mm
Width 480 mm
Depth 390 mm
Weight 7000 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Römer Kidfix XP below.

Is your question not listed? Ask your question here

No results