Rolls MP13 manual

Rolls MP13
(1)
  • Number of pages: 1
  • Filetype: PDF

MP13 Mini mic Preamp

Rolls Corporation
Salt Lake City, UT
9/12
- Home
- Studio
- Broadcast
... anywhere you need a clean preampli er for your favorite dynamic or condenser microphoneSCHEMATIC

MP13 Mic Preamp

MP13 Mic Preamp

MP13 Mic Preamp

MP13 MINI-MIC PREAMP

MICROPHONE PREAMP
- XLR and 1/8” Inputs- XLR and 1/4” Outputs- Gain Control- Clip LED indicator- +24 Volt Phantom Power
The MP13 is designed to provide simple, inexpensive microphone
preampli cation for a variety of applications. The unit has both XLR
and 1/4” inputs and outputs, a single Gain control with a Clip LED
indicator, and Phantom powering is included for use with a con-
denser microphone. The 1/4” output is specially designed for use
as either a mono unbalanced output, or a stereo headphone output.
SPECIFICATIONS
Connectors: Inputs; XLR, 1/8” (3.5mm) TRS balanced Mic In
Outputs: XLR balanced, 1/4” unbal. Aux/Hdphn
Input Impedance: 10K Ohms bal, unbal.
Max Input Level: +4 dBV XLR bal, +10 dBV unbal.
Max Gain: 60 dB/XLR, 54 dB 1/4”
Phase Shift: <10 deg. 20 Hz - 20 kHz
EIN: -108 dB max.
THD: <.01%
IMD (SMPTE) <.01%
CMRR: > 80dB
Phantom Power: +24 Volts, 6 mA
Power: 12 VDC adapter
Weight: 1 lbs (.45Kg)
Size: 3.4” x 4.2” x1.4”
INTRODUCTION
Thank you for purchasing the ROLLS MP13 MINI-MIC Microphone
Preamp. The MP13 uses a servo balanced instrumentation ampli -
er for studio grade performance in a small package. This equates to
a 40db better common mode rejection ratio (CMRR) than transistor
inputs used by most companies on mic inputs. It also means much
lower distortion. The clearer sound with more airputs the MP13 in
a class with much higher priced units.
WARRANTY
For compete information on the Rolls 1 Year Warranty, and to regis-
ter this product, see our website at www.rolls.com.
FEATURES
- XLR and 1/8” Mic Inputs
- XLR and 1/4” Outputs
- Gain Control
- Clip LED indicator
- 1/4” Output Drives Stereo Headphones
- +24 Volt Phantom Power - available for 1/8” microphones
DESCRIPTIONINPUT: 1/8” (3.5mm) and female XLR jack for signal input.OUTPUT: 1/4” and male XLR jack for signal output. May be connected to stereo headphones for personal monitoring.POWER: Sleeve positive barrel jack for connection to the AC power adapter.GAIN: Controls the amount of signal increase to the MP13. CLIP: LED for indicating circuit clipping. Indicates distortion is possible.PHANTOM POWER: When pressed in, applies +24 volts of phan-tom powering to the XLR input.PWR: LED for indicating power is applied to the MP13.
Rolls MP13

Need help?

Number of questions: 0

Do you have a question about the Rolls MP13 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Rolls MP13 owners to properly answer your question.

View the manual for the Rolls MP13 here, for free. This manual comes under the category Receivers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Rolls MP13 or do you need help? Ask your question here

Rolls MP13 specifications

General
Brand Rolls
Model MP13
Product Receiver
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Rolls MP13.

Is your question not listed? Ask your question here