instructions ™
ELECTROLYSIS HAIR REMOVER Rio, Dezac and Electrolysis Hair Remover™
are trademarks of The Dezac Group Ltd
© The Dezac Group Ltd 2012
PO Box 17, Cheltenham Spa, England GL53 7ET
www.riobeauty.com
Using micro current technology the Electrolysis Hair Remover
destroys the hair root and papilla to prevent future hair growth.
The micro current changes the pH in the hair follicle to alkaline
which then starts to attack the hair root and papilla cells (it is
these cells which are responsible for hair growth). This action
continues for sometime after the treatment is complete and
the hair has been removed.
It is not always possible to kill all of the papilla cells in a single
treatment and in these situations the hair may regrow
regrow it is generally much finer and lighter than previously
Successive treatments will kill the papilla cells giving a
permanent result. Y
methods in between treatments.
The destruction of the hair root cells continues for some
time after the treatment has finished. It makes no difference
whether you remove the hair immediately or not.
If there is a particularly stubborn hair
or longer treatment time may be required.
As with all hair removal treatments it is recommended that
the area you have treated is washed with cool water and a
mild antiseptic cream applied.
TIPS
detect the conductive gel.
battery power is low and it needs replacing.
The use of a good quality, leak-proof alkaline battery
is recommended.
the battery or unplug from the mains.
power adapter, which plugs into the adapter socket on
the side. To order please call the Customer Careline.
on the console unit and do not use them for any other
purpose than intended.
cloth, the console unit can also be wiped over.
1. Console
3. T
(AMBER)
4. Control dial
5. T
6. Wand output socket
7. P
(optional extra available
from the Customer Careline)
8. T
10. Conductive gel
YOUR ELECTROLYSIS HAIR REMOVER CONDUCTIVE GEL
professional range
BODY CARE
BATTERY 9V PP3
1
9
0
!
8
5
7
Problem F r emedy
Amber treatment
light does not
and console
bleeps.
Good contact
with the hair
is not being
maintained or
your finger is not
touching tweezer
button.
Check tweezers
are connected
Ensure you are
using gel.
Grasp hair at
skin level.
The amber light
has gone out and
the console is
bleeping.
The contact
with the hair or
tweezer button
has been lost.
If the contact is not
re-established
within three
seconds the
treatment timer will
assume you have
moved onto a new
hair and restart
the treatment from
the beginning.
Grasp hair
at skin level.
The console is
bleeping and the
power light is
flashing.
Console left on -
and not used.
Turn the
console off.
Console is
bleeping
constantly.
Low Battery. Replace battery.
The hair is
difficult to
remove.
More than a
single treatment
is required to kill
this hair.
If there is a lot
of resistance
an additional
treatment or longer
treatment time of
the same hair
may be required
Hair regrows.
It is not always
possible to kill
all of the papilla
cells in a single
treatment.
Repeat the
treatment when the
hair grows back.
Use a longer
treatment time.
Redness of skin
after treatment.
This is quite
normal, you may
wish to apply an
antiseptic cream,
however the
redness should
fade within one
or two hours.
Treatment light
on continuously.
Contact is being
maintained
even when the
tweezers are not
in use.
Clean tweezers
with a damp
cloth thoroughly,
removing all traces
of conductive gel.
1-IN-CNHR2-UK / 1.1
2
6
3
4
© The Dezac Group
© The Dezac Group
© The Dezac Group 
Need help?
Do you have a question about the Rio and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Samsung Galaxy A7 owners to provide you with a good answer.
How to use the product?
Number of questions: 1