Rinnai RB-93TS manual

Rinnai RB-93TS
6.8 · 1
PDF manual
 · 22 pages
English
manualRinnai RB-93TS
25272520

Conversion from NG to LPG & LPG to NG

Warning!

Only a qualified person can convert this appliance.
. Remove pan support, burners and knobs from the hob body.
. Remove the stainless steel top plate by using a cross screwdriver.
Be careful not to damage the electrode and the thermocouple
when removing the steel top plate.
. Use the key included to loose the holder at the ventury as shown
in picture 1.
. Use type #12 & #14 fixed wrench to remove the nuts on the
copper pipe and the nozzles at the ventury as shown in picture 2.
. Remove all the nozzles from the ventury and place the correct
nozzles back. Make sure the damper plates and the damper springs
are properly installed.
. Tighten back the nuts and nozzles onto the copper
pipe.
. Use a spanner to remove the LPG adaptor if using Natural gas or
install if using LPG. Do make sure that it is tight.
. Do a leak test on all joint to ensure there is not leakage found.
. Replace back all the parts back onto the hob.
. Change the label to inform the change of gas type.
Pic 2
Pic 1
目录
器具指引RB-72S / RB-72G / RB-73TS / RB-73TG / RB-92G / RB-93TS
器具指引 RB-93TG / RB-93US / RB-93UG
器具指引
产品说明
安全指引
初次使用
安装指引
使用说明
适用盘子
清洁与保养
常见问题与解决
林内客服中心
气种置换NGLPG & LPGNG
警示强化玻璃
21
22
23
44
26
28
29
33
35
36
39
40
41
41

中文中文

Caution for the tempered glass
Never use oversized cooking utensils or
overload the cooking appliances.
Do not remove the pan support and
enclose the burner with a wok stand as
this will concentrate and deflect the
heat onto the gas hob.
Do not place anything, e.g., flame tamer, asbestos mat between pan
and pan support as serious damage to appliance may result.
Do not place the cooker pan over
the pan support side as it can
cause tumbling.

Use only a wok support supplied or

recommended by the manufacturer
of the appliance.

Manual

View the manual for the Rinnai RB-93TS here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Rinnai RB-93TS or do you need help? Ask your question here

Need help?

Do you have a question about the Rinnai and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Rinnai RB-93TS specifications

Below you will find the product specifications and the manual specifications of the Rinnai RB-93TS.

General
BrandRinnai
ModelRB-93TS
Productstove
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Rinnai RB-93TS below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

Is the manual of the Rinnai RB-93TS available in English?

Yes, the manual of the Rinnai RB-93TS is available in English .

Is your question not listed? Ask your question here

No results