Rinnai RB-93TS manual

Rinnai RB-93TS
6.8 · 1
PDF manual
 · 22 pages
English
manualRinnai RB-93TS

Cleaning and Care

Cleaning
Cleaning
Stainless Steel
&
Glass Surface
Pan supports
Instructions
Printed surfaces
(Flame symbols)
Remove any soiling which comes into contact with the
printed flame symbols straight away. Soiling,
particularly salty food or liquid and olive oil, can cause
damage if left on the printed surfaces for a long time.
Do not use stainless steel cleaning agents on the
printed flame symbols. This would rub off the print.
Stubborn soiling should be soaked first. The pan
supports are not dishwasher proof.
Remove the pan supports. Clean the pan
supports using a solution of warm water
and a little washing-up liquid applied with a
soft sponge.
If necessary, you could use the scouring
pad on the reverse of a washing-up
sponge
Controls
Clean the controls with a solution of warm
water and a little washing-up liquid applied
with a soft sponge.
Burner Head
Burner Body
and Simmer
Burner Head
Clean the burner head with a solution of
warm water and a little washing-up liquid
applied with a soft sponge.
If necessary, you could use the scouring
pad on the reverse of a washing-up
sponge.
Ignitor, Flame
Safety Device
The Ignitor and ignition safety devices
should be very carefully wiped clean using
a dry cloth.
The controls are not dishwasher proof.
The burner head are not dishwasher proof.
Make sure that the flame slits are completely dry after
cleaning.
Do not let the ignitor get wet. If they get wet they will
not spark.
17
产品指引
炉头分解
1 燃烧头
2 燃烧器本体

3 电极

4 热电偶
5 文丘里
1 Simmer燃烧器头
2 燃烧器本体
3 电极
4 热电偶
5 文丘里
6 燃烧头
安全切断系统
& 超小炉头 中 &大炉头
热电偶 电极
1
2
3
4
5
1
6
2
3
4
5
23
您的灶具配备了一个安全装置(热电偶)
如果火焰突然熄灭,它可以防止气体流入燃
烧器。
要再次使用燃烧器,请将控制器顺时针旋转
OFF )位置,然后正常开启。安全开
关独立于电源运行
为确保此设备处于活动状态,请照常打开燃
烧器,并在不释放控制的情况下,在点燃火
焰后按住并保持5秒钟
Clean stainless steel & glass surfaces with a
solution of warm water and a little washing-
up liquid applied with a soft sponge.
If necessary, you could use the scouring
pad on the reverse of a washing-up
sponge. Apply with an even pressure
following the direction of the “grain".

Manual

View the manual for the Rinnai RB-93TS here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Rinnai RB-93TS or do you need help? Ask your question here

Need help?

Do you have a question about the Rinnai and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Rinnai RB-93TS specifications

Below you will find the product specifications and the manual specifications of the Rinnai RB-93TS.

General
BrandRinnai
ModelRB-93TS
Productstove
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Rinnai RB-93TS below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

Is the manual of the Rinnai RB-93TS available in English?

Yes, the manual of the Rinnai RB-93TS is available in English .

Is your question not listed? Ask your question here

No results