Rinnai RB-93TS manual

Rinnai RB-93TS
6.8 · 1
PDF manual
 · 22 pages
English
manualRinnai RB-93TS

Installation Guide

Installation
All operations relating to installation, regulation and conversion to other types of gas
must be carried out by an authorised installation personnel, respecting applicable
regulations, standards and the specifications of the gas and electricity providers.
Before you begin, turn off the appliance's electricity and gas supply.
You are recommended to contact your local Rinnai Customer Care Centres to convert
to another type of gas.
The units next to the appliance must be made of non-flammable materials. The laminated
covering and glue for adhering it must be heat resistant.
This appliance cannot be installed above fridges, washing machines, and dish washer or
similar.
An oven must have a power cooling fan to install a hob above it. Check the oven's
dimensions in its installation manual.
If a cooker hood is installed, you must follow the installation manual's instructions, always
keeping a minimum distance of 550 mm to the hob.
Preparing the Bench Top (Fig 2 & Fig 3)
Make an appropriate size cut in the work surface.
It is recommendable to place a non-flammable separator (e.g. metal or plywood) 10 mm
from the bottom of the hob. This will prevent access to the base of the hob.
On wood work surfaces, varnish the cutting surfaces with a special glue. This protects them
from moisture which could collect under the work surface.
Installation of Appliance
The adhesive seal (underside of the hob) are factory-fitted: do not under any circumstances
remove them. The seal ensures that the entire work surface will be watertight, and prevents
water seepage.
In order to fit the appliance into the kitchen unit, first place the hob in the correct position.
Insert and centre the hob. Press the sides of the hob until it is supported around its entire
perimeter.
Removal of Hob (Fig 1)
1) Turn off incoming gas
2) Remove gas hose
3) Life the hob up.
9
Fig 1
安装指引
电气连接电气连接
请将DC 1.5V电池安装到灶具底部的电池盒中。 (Fig 4)
当电池耗尽时; 或火花变弱,应更换新电池。 电池仓位于图中所示位置。
将电池按照所示的正确极性放置。
警告:如果灶具长时间不使用,请取出电池
Fig 4
31
燃气连接 (Fig. 5)
燃气灶气体的入口连接点的端部具有1/2" 螺纹,其允许:
固定连接。
使用软管连接(仅适用于LPG)。 在这种情况下,需要插入附件和O型,如图5所示。
此时,请务必防止软管接触插入到厨房里的可移动物件内 (例如抽屉) 并不要经过任何可造
成阻塞的地方。
警告! 气体连接完成后,务必确认是否漏气。制造商不对任何连接泄漏承担责任。
A) 燃气接口
B) O-垫圈
C) LPG 适配器
D) LPG 软管
E) 软管夹
Fig 5
A
B
C
E
D

Manual

View the manual for the Rinnai RB-93TS here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Rinnai RB-93TS or do you need help? Ask your question here

Need help?

Do you have a question about the Rinnai and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Rinnai RB-93TS specifications

Below you will find the product specifications and the manual specifications of the Rinnai RB-93TS.

General
BrandRinnai
ModelRB-93TS
Productstove
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Rinnai RB-93TS below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

Is the manual of the Rinnai RB-93TS available in English?

Yes, the manual of the Rinnai RB-93TS is available in English .

Is your question not listed? Ask your question here

No results