View the manual for the Rinnai Infinity 16 here, for free. This manual comes under the category water heaters & boilers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Rinnai Infinity 16 or do you need help? Ask your question here
The Rinnai Infinity 16 is a water heater and boiler that is designed to provide a continuous and reliable supply of hot water. This unit is manufactured by Rinnai, a well-known and reputable brand in the industry. The Rinnai Infinity 16 is designed to be efficient and energy-saving, helping to reduce utility costs. It utilizes advanced technology to heat water only when it is needed, eliminating the need for a storage tank and reducing standby energy loss. This unit has a high energy efficiency rating, ensuring that it provides hot water while minimizing energy consumption. With its compact design, the Rinnai Infinity 16 can fit in various installation spaces, making it versatile and suitable for different types of homes and buildings. It is designed to be easy to install and maintain, with user-friendly controls and a detailed instruction manual provided. The Rinnai Infinity 16 has a high flow rate, ensuring that it can deliver hot water quickly and efficiently. This makes it suitable for larger households or commercial applications where there is a need for a high volume of hot water. Safety is a top priority with the Rinnai Infinity 16. It is equipped with various safety features, including flame failure detection and overheating prevention, to ensure the safe operation of the unit. Overall, the Rinnai Infinity 16 is a reliable and efficient water heater and boiler that provides a continuous supply of hot water. It is designed with user convenience and energy-saving features in mind, making it a popular choice among homeowners and businesses alike.
| Brand | Rinnai |
| Model | Infinity 16 |
| Product | water heater & boiler |
| Language | English |
| Filetype | User manual (PDF), Instructions / Assembly (PDF), Datasheet (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Rinnai Infinity 16 below.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
To adjust the temperature on your Rinnai Infinity 16 water heater, locate the control panel on the front of the unit. Use the up and down arrows to increase or decrease the temperature setting to your desired level.
If you are not getting any hot water from your Rinnai Infinity 16, first check that the gas supply is turned on and the pilot light is lit. If the pilot light is out, follow the instructions in the manual for relighting it. If the pilot light is lit, ensure that the water supply valve is fully open and that there are no blockages in the water filters.
It is recommended to flush the heat exchanger on your Rinnai Infinity 16 at least once a year to remove any mineral deposits or sediment buildup. This helps maintain optimal performance and efficiency of the unit.
If you encounter an error code on your Rinnai Infinity 16, first try resetting the unit by turning off the power for a few minutes and then turning it back on. If the error persists, consult the troubleshooting section of the manual for specific instructions corresponding to the error code displayed.
To minimize the noise generated by your Rinnai Infinity 16, ensure that the unit is installed on a sturdy, level surface. Additionally, check for loose connections or pipes and tighten them if necessary. If the noise persists, consider installing vibration isolation pads under the unit to further reduce vibrations and noise.
Yes, the manual of the Rinnai Infinity 16 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Rinnai and is the answer not in the manual?
Question and answer
Number of questions: 7Heater tries to ignite gas’s but not no ignition. Gas’s is on at the gass tank. Control panel is on . In use is off
1 comment
Yes, the Rinnai Infinity 16 water heater and boiler attempts to ignite the gas but fails to do so if the gas supply is turned off at the gas tank, the control panel is turned off, or the "In Use" function is turned on. Please ensure that the gas supply is turned on at the gas tank, the control panel is turned on, and the "In Use" function is turned off.
This answer is automatically generatedWhy does hot water service turn off after putting tap fully on especially during cold weather
Does using the pre heat option on a Rinnai 16 increase the gas usage by what % ?
My Rennai infinity 16 hot water Heater Turns off hot water if tap is turned on too much You then have to turn it off and then turn it on again to get your hot water. This seems to be a cold weather problem
Older model 16 sounds like it is venting from time to time , is this normal?
Does a pilot light need to be lit to use this system
my unit does not turn on.