View the manual for the Rex VX-200 here, for free. This manual comes under the category vibration plates and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Rex VX-200 or do you need help? Ask your question here
| Brand | Rex |
| Model | VX-200 |
| Product | vibration plate |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Rex VX-200 below.
To troubleshoot if the Rex VX-200 vibration plate is not turning on, follow these steps: 1. Check the power source: Ensure that the vibration plate is properly connected to a working power outlet. Make sure the power outlet is providing the correct voltage (220-240V/50Hz) as specified in the manual. 2. Verify the power cable: Examine the power cable for any visible damage or loose connections. If there are any issues, replace the power cable with a new one that is compatible with the vibration plate. 3. Check the power switch: Ensure that the power switch on the vibration plate is in the "on" position. Sometimes, the switch may accidentally be turned off. 4. Reset the circuit breaker: If the vibration plate is connected to a circuit breaker, check if it has tripped. Reset the circuit breaker if necessary. 5. Contact customer support: If the vibration plate still does not turn on after following the above steps, it is recommended to contact the manufacturer's customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for repairs if needed. Remember to always refer to the manual for detailed instructions and safety precautions when troubleshooting the Rex VX-200 vibration plate.
If the Rex VX-200 vibration plate is making unusual noises during operation, you can try the following steps to troubleshoot the issue: 1. Check for loose parts: Inspect the vibration plate for any loose or detached parts. Tighten any screws or bolts that may have come loose during use. 2. Verify proper assembly: Ensure that the vibration plate is correctly assembled according to the instructions provided in the manual. Make sure all components are securely attached and in the correct positions. 3. Check for foreign objects: Remove any foreign objects that may have fallen or gotten stuck inside the vibration plate. These objects can cause unusual noises during operation. 4. Lubricate moving parts: Apply a small amount of lubricant to the moving parts of the vibration plate, such as the pivot points or hinges. This can help reduce friction and eliminate noise caused by dry or worn-out components. 5. Contact customer support: If the unusual noises persist after performing the above steps, it is recommended to contact the manufacturer's customer support for further assistance. They will be able to provide specific troubleshooting advice or arrange for repairs if necessary. Remember to always follow the safety instructions provided in the manual when troubleshooting the Rex VX-200 vibration plate.
To troubleshoot if the Rex VX-200 vibration plate is not providing the desired vibration intensity, you can follow these steps: 1. Start with light exercises: If you are a beginner, begin with light exercises that are not too complicated. Gradually increase the intensity of your workouts over time. 2. Check your workout plan: Ensure that you are following a workout plan that is suitable for your fitness level and goals. The manual provides a variety of exercises categorized into strengthening/muscle development, stretching, and massage. Choose exercises that target the specific areas you want to work on. 3. Increase complexity: As you become more comfortable with the vibration plate, gradually add more complexity to your exercises. This can include incorporating different positions, movements, or using additional accessories like hand straps. 4. Adjust workout frequency: Beginners should start with 1-2 exercise sessions per week, while experienced users can increase their workouts up to 3 times a week. Avoid exceeding 15 minutes per session. 5. Customize your workout: Experiment with different exercises and variations to find the ones that work best for you. The Rex VX-200 vibration plate offers a variety of possible uses, allowing you to personalize your workout plan. Remember to warm up before each workout session to improve circulation and decrease the risk of muscle injury. If you continue to experience issues with the vibration intensity, it is recommended to contact customer support for further assistance.
If the Rex VX-200 vibration plate is not responding to the remote control, you can check the following: 1. Ensure proper battery installation: Make sure the batteries in the remote control are correctly installed with the correct polarity (+/-). 2. Check battery power: Verify that the batteries have sufficient power. If the batteries are low, replace them with new ones. 3. Check for obstructions: Ensure that there are no obstructions between the remote control and the vibration plate. Remove any objects that may be blocking the signal. 4. Check remote control distance: Make sure you are within the recommended distance range specified in the manual for the remote control to function properly. 5. Reset the vibration plate: Try resetting the vibration plate by turning it off and then back on again. This can help establish a connection between the remote control and the vibration plate. If the remote control still does not respond after checking these steps, it is recommended to contact customer support for further assistance. They will be able to provide specific troubleshooting advice or arrange for repairs if necessary.
To troubleshoot if the Rex VX-200 vibration plate is displaying an error message on the control panel, you can follow these steps: 1. Check the error message: Take note of the specific error message displayed on the control panel. This information can help identify the issue and determine the appropriate troubleshooting steps. 2. Power cycle the vibration plate: Turn off the vibration plate and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on again. This can sometimes resolve temporary errors. 3. Reset the control panel: Look for a reset button or option on the control panel. Press and hold the reset button or follow the instructions in the manual to reset the control panel. This can help clear any software glitches or errors. 4. Check for loose connections: Inspect the cables and connections between the control panel and the vibration plate. Ensure that they are securely plugged in and not damaged. Tighten any loose connections if necessary. 5. Contact customer support: If the error message persists after performing the above steps, it is recommended to contact the manufacturer's customer support for further assistance. They will be able to provide specific troubleshooting advice or arrange for repairs if needed. Remember to always refer to the manual for any specific instructions or troubleshooting steps related to the Rex VX-200 vibration plate.
Yes, the manual of the Rex VX-200 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Rex and is the answer not in the manual?
Question and answer
Number of questions: 0