Remington MB4047 manual

Remington MB4047
7.5 · 1
PDF manual
 · 144 pages
English
manualRemington MB4047
I www.remington-europe.com

Beard Kit Trimmer

MB4047

View the manual for the Remington MB4047 here, for free. This manual comes under the category grass trimmers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Remington MB4047 or do you need help? Ask your question here

Need help?

Do you have a question about the Remington and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Remington MB4047 is a grass trimmer designed for precise hair trimming. Its minimum hair length setting is 1 millimeter, while the maximum hair length it can trim is 35 millimeters. This grass trimmer is not suitable for wet trimming as it is not designed to be used in wet or damp conditions. The Remington MB4047 offers two control options: buttons and rotary control, giving users flexibility in choosing their preferred way of operating the trimmer. It features a self-sharpening blade made of titanium, which ensures the blade stays sharp for a longer period of time. One notable feature of this grass trimmer is its cordless functionality, allowing users to trim their hair without the limitation of a cord. It can be powered by either AC or battery, providing convenience and flexibility. This trimmer is rechargeable and can operate for a maximum of 90 minutes once fully charged. However, it requires a relatively long charging time of 16 hours to reach its full capacity. With its durable construction and premium blade material, the Remington MB4047 is designed to provide reliable performance and durability over time. It is suitable for individuals who prefer precise and controlled hair trimming.

General
BrandRemington
ModelMB4047 | 43293 560 100
Productgrass trimmer
EAN5038061134193
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Minimum hair length1 mm
Number of length steps-
Maximum hair length35 mm
Wet & DryNo
Control typeButtons, Rotary
Self-sharpening bladeYes
Design
Product colorBlack, Violet
CordlessYes
Blade materialTitanium
Power
Power sourceAC/Battery
RechargeableYes
Battery typeBuilt-in battery
Battery technologyNickel-Metal Hydride (NiMH)
Operating time90 min
Charging time16 h
Charging indicatorYes
Packaging data
Package typeBox
Packaging content
Combs quantity3
Attachments quantity5
Travel caseYes
Trimmer includedYes
Batteries includedYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Remington MB4047 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Is the Remington MB4047 a wet & dry grass trimmer?

No, the Remington MB4047 is not a wet & dry grass trimmer. This means that it is not suitable for use in wet conditions and should only be used on dry grass.

Does the Remington MB4047 have self-sharpening blades?

Yes, the Remington MB4047 has self-sharpening blades. This means that the blades maintain their sharpness over time, leading to a more efficient and precise trimming experience.

Is the Remington MB4047 a cordless grass trimmer?

Yes, the Remington MB4047 is a cordless grass trimmer. This means that users have the freedom to move around without being restricted by a cord, making it more convenient and versatile to use.

What is the power source of the Remington MB4047?

The Remington MB4047 can be powered by both AC and battery. This means that users have the option to use it with a power outlet or rely on its rechargeable battery for more flexibility in trimming locations.

How long is the operating time of the Remington MB4047?

The Remington MB4047 has an operating time of 90 minutes. This is a relatively long operating time compared to other grass trimmers, allowing for extended trimming sessions without the need for frequent recharging.

How do I troubleshoot if the on/off switch of the Remington MB4047 grass trimmer is not working?

To troubleshoot if the on/off switch of the Remington MB4047 grass trimmer is not working, follow these steps: 1. Check the power source: Ensure that the trimmer is properly charged if you are using it in cordless mode. Connect the charging adaptor to the trimmer and the mains, and let it charge for at least 16 hours. If you are using it in corded mode, make sure it is connected to a functioning power source. 2. Verify the switch position: Slide the on/off switch of the trimmer to the "on" position. Ensure that it is securely in place and not stuck in between positions. 3. Clean the switch: If the switch feels sticky or unresponsive, it may be due to dirt or debris. Use a soft, dry cloth to clean the switch and remove any buildup that may be affecting its functionality. 4. Check for loose connections: Inspect the trimmer for any loose wires or connections. If you notice any, consult the user manual for instructions on how to properly secure or repair them. 5. Contact customer support: If the on/off switch still does not work after following the above steps, it is recommended to contact Remington customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting any issues with the trimmer.

What should I do if the charging indicator light does not turn on when I connect the trimmer to the charging adaptor?

If the charging indicator light does not turn on when you connect the Remington MB4047 grass trimmer to the charging adaptor, you can try the following steps to troubleshoot the issue: 1. Ensure the trimmer is switched off: Before connecting the charging adaptor, make sure the trimmer is switched off. This will ensure proper charging. 2. Check the connection: Verify that the charging adaptor is securely connected to both the trimmer and the mains power source. Ensure that the connections are not loose or damaged. 3. Wait for charging: Allow the trimmer to charge for the recommended duration. The charging indicator light should turn on during the charging process. Refer to the user manual for the recommended charging time. 4. Clean the charging contacts: If the charging indicator light still does not turn on, there may be dirt or debris on the charging contacts. Gently clean the charging contacts on both the trimmer and the charging adaptor using a soft, dry cloth. 5. Contact customer support: If the issue persists after following the above steps, it is recommended to contact Remington customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting any issues with the trimmer.

Why is the trimmer not turning on in cordless mode even after charging it?

If the Remington MB4047 grass trimmer is not turning on in cordless mode even after charging it, you can try the following steps to troubleshoot the issue: 1. Verify the charging process: Ensure that you have followed the correct charging procedure as mentioned in the user manual. Connect the charging adaptor to the trimmer and the mains, and let it charge for the recommended duration (usually 16 hours). 2. Check the charging indicator: During the charging process, the charging indicator light should turn on. If the light does not illuminate, it may indicate a problem with the charging process or the battery. 3. Clean the charging contacts: If the charging indicator light does not turn on, there may be dirt or debris on the charging contacts. Gently clean the charging contacts on both the trimmer and the charging adaptor using a soft, dry cloth. 4. Reset the trimmer: Try resetting the trimmer by disconnecting it from the charging adaptor and removing the battery (if possible). Wait for a few minutes, then reinsert the battery and reconnect the charging adaptor. 5. Contact customer support: If the trimmer still does not turn on in cordless mode after following the above steps, it is recommended to contact Remington customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting any issues with the trimmer.

How can I troubleshoot if the trimmer comb is not securely attached to the trimmer?

To troubleshoot if the trimmer comb is not securely attached to the Remington MB4047 grass trimmer, you can follow these steps: 1. Turn off the trimmer: Ensure that the trimmer is switched off before attempting to attach or reattach the comb. This will prevent any accidental activation of the trimmer. 2. Remove the comb: If the comb is already attached but not securely, gently remove it from the trimmer. Follow the instructions in the user manual for proper comb removal. 3. Clean the attachment area: Inspect the attachment area on the trimmer and the comb for any dirt, debris, or hair buildup. Use a soft, dry cloth to clean both surfaces and ensure they are free from any obstructions. 4. Align the comb: Align the comb with the attachment area on the trimmer. Make sure the comb is positioned correctly and fits securely onto the trimmer. 5. Attach the comb: Press the comb firmly onto the attachment area of the trimmer. Apply even pressure to ensure a secure attachment. You should hear or feel a click when the comb is properly attached. 6. Test the attachment: Gently tug on the comb to ensure it is securely attached to the trimmer. It should not come loose or detach easily. If the comb still does not attach securely or if you encounter any difficulties, it is recommended to contact Remington customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting any issues with the trimmer.

What should I do if the trimmer is not cutting the hair evenly when using the XL comb for longer beards?

If the Remington MB4047 grass trimmer is not cutting the hair evenly when using the XL comb for longer beards, you can try the following steps to troubleshoot the issue: 1. Check the comb position: Ensure that the XL comb is properly attached to the trimmer and positioned correctly. Make sure it is securely in place and not loose or misaligned. 2. Clean the comb and blades: Inspect the comb and blades for any hair, debris, or product buildup. Use a small brush or a soft, dry cloth to clean both the comb and the blades. Ensure that they are free from any obstructions that may affect the cutting performance. 3. Adjust the comb length: If the hair is not being cut evenly, try adjusting the length setting on the XL comb. Experiment with different length settings to find the one that provides the desired cutting result. 4. Comb the hair before trimming: Before using the trimmer, comb the beard or mustache in the direction of hair growth. This will help to align the hair and make it easier for the trimmer to cut evenly. 5. Trim in small sections: When using the trimmer, work in small sections and move the trimmer slowly and evenly through the hair. Avoid rushing or applying excessive pressure, as this can lead to uneven cutting. If the issue persists after following these steps, it is recommended to contact Remington customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting any issues with the trimmer.

How do I fix it if the trimmer is pulling or snagging the hair while blending or tapering the beard?

If the Remington MB4047 grass trimmer is pulling or snagging the hair while blending or tapering the beard, you can try the following steps to fix the issue: 1. Check the comb attachment: Ensure that the comb attachment is securely attached to the trimmer and properly aligned. Make sure it is not loose or misaligned, as this can cause the trimmer to pull or snag the hair. 2. Clean the comb and blades: Inspect the comb and blades for any hair, debris, or product buildup. Use a small brush or a soft, dry cloth to clean both the comb and the blades. Ensure that they are free from any obstructions that may be causing the pulling or snagging. 3. Apply light pressure: When using the trimmer, apply light and even pressure on the comb. Avoid pressing too hard, as this can cause the trimmer to pull or snag the hair. Let the trimmer do the work and guide it smoothly through the hair. 4. Trim in the direction of hair growth: Trim the beard or mustache in the direction of hair growth. This will help to minimize pulling or snagging and ensure a smoother trimming experience. 5. Use shorter strokes: Instead of trying to trim a large section of hair at once, use shorter strokes and work in smaller sections. This will allow for more control and reduce the chances of the trimmer pulling or snagging the hair. If the issue persists after following these steps, it is recommended to contact Remington customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting any issues with the trimmer.

Is the manual of the Remington MB4047 available in English?

Yes, the manual of the Remington MB4047 is available in English .

Is your question not listed? Ask your question here

No results