RCA LED40C45RQ manual

RCA LED40C45RQ
(1)
  • Number of pages: 4
  • Filetype: PDF
TV STAND BASETV STAND NECK
Model Number.
LED32B30RQ
Part No.: RN0340R0102
Please register your product at www.rca.com
Englis h
Please keep your sales receipt and keep the record of
the serial number and the date of purchase in order to
receive warranty parts and service.
The serial number is located at the back of the TV.
LED LCD TVUser’s ManualQUICK START GUIDE Quick Start GuideUSER’S GUIDE DOCUMENTSPATENT CARDThe televi sion is cover ed by one or more cla ims of the foll owing United Sta tes patent s:· U.S. Patent No. 5,511,096· U.S. Patent No. 5,621,761· U.S. Patent No. 5,703,887· U.S. Patent No. 5,745,522· U.S. Patent No. 5,511,082· U.S. Patent No. 5,371,902· U.S. Patent No. 5,233,629· U.S. Patent No. 5,408,502· U.S. Patent No. 5,311,546· U.S. Patent No. 5,396,518· U.S. Patent No. 5,475,716· U.S. Patent No. 5,537,420· U.S. Patent No. 5,519,733· U.S. Patent No. 5,579,348· U.S. Patent No. 5,363,408· U.S. Patent No. 5,321,725
Part No.: RN4146AL05

Table of Contents

Caution and Warning......................................................
2
Child Safety Guide...........................................................
1
......................................................................FCC Notice 2.........................................Preparation for Your New TV
3
...........................................................Check Accessories
3
........................................................Setup TV Table Stand
3
............................................................Select TV Location
3
........................................................Connection and Using
3
.......................................................TV Stand Installation
3
.........................................................Safety Precautions 2......................................................TV Signal Connection 4..........................................................Cable Connections 4..................................................Side Panel Connections 4.....................................................TV Jacks Explanation
5
.................................................Keypad and Front Panel
6
.................................
4
Connecting AV Composite Video device...................................
5
Connecting YPbPr Component device......................................................................Initial Setup 7....................................................
5
Connecting HDMI device.........................
5
How to Obtain Various Kinds of Input Sources.............................................................Basic Operations 7............................................................
7
Turning On and Off.........................................................
7
Choosing TV Channel.......................................................
7
Selecting Input Source.....................................................................
7
Channel Bar..............................................................
7
Adjusting Volume...........................................
8
EPG (Electronic Program Guide)..................................................................
6
Panel Buttons......................................................................
6
Front Panel..........................................Remote Control Instructions
6
..........................................
6
Inserting Batteries in the Remote....................................Learning about Remote Control
6
.....................................................
6
Remote Control Buttons..........................................
6
Remote Control Reception Angle.............................................................USB Media Play
13
....................................................Product Specification
13
................................................................Warranty Card
14
OSD Menu Operations....................................................
8
......................................................
8
Adjust the OSD Screen...................................................................
8
Picture Menu....................................................................
8
Sound Menu.................................................................
9
Channel Menu.................................................................
9
Parental Menu............................
11
Frequently Asked Questions (FAQs)............................................................
11
Troubleshooting..........................................
12
V-Chip Rating Explanations..................................................
12
US V-Chip Rating System.........................................
12
Canadian English Rating System.........................................
12
Canadian French Rating System...................................................................
10
Setup Menu..................................................................
10
Others Menu.................................Wall Mounting Unit Specification
13

Child Safety Guide

Child Safety Guide

1

FCC Notice

Caution and Warning

Use una montura que se ha recomendado por el fabricante de monitor y/olistado por un laboratorio independiente (como UL, CSA, ETL).Siga todas las instrucciones ofrecidas por el fabricante de monitor ymontaje de pared.The lightning flash with arrowheadsymbol, within an equilateral triangleis intended to alert the user to the presence of uninsulated dangerousvoltage within the product enclosurethat may be of sufficient magnitude toconsitute a risk of electric shock.Caution: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside.Refer servicing to qualified service personnel.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENWARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE WITH THE FCC RULES COULD AVOID THE USERS AUTHORITY TO OPERATE THIS EQUIPMENT.

Safety Precautions

FCC InformationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. However, there is no Guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and the receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.The exclamation point within an equilateral triangle is intended toalert the user to the presence ofimportant operating and maintenance(servicing) instructions in the literatureaccompanying the TV.1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water. For example, do not use near a laundry tub, in a wet basement, or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable operation of the TV and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. A TV and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV and cart combination to overturn.13. Unplug this apparatus during lightning storms or when unused for long periods of time. For added protection for this TV receiver during a lightning storm, or when it is left unused for long periods of time, unplug it from the wall outlet and disconnect antenna or cable system. This will prevent damage to the TV due to lightning and power line surges.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
2 3

Preparation for Your New TV

as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the appratus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. This TV should be operated only from the type of power supply indicated on the rating label. If customer is not sure the type of power supply in your home, consult your appliance dealer or local power company. For TV remote control battery power, refer to the operating instructions.16. The TV set shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the TV set. 17. Never push objects of any kind into this TV through openings as they may touch dangerous voltage or other electrical parts that could result in fire or electric shock. Never spill liquid of any kind into the TV.18. Unplug the TV from the wall outlet before cleaning. Do not use liquid or aero cleaners. Use a damp cloth for cleaning.19. This TV should never be placed near or over a radiator or heat resource. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.20. Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance.21. Do not attempt to service this TV by yourself because opening or removing covers may expose you to dangerous high voltage or other hazards. Refer all servicing to qualified service personnel.22. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.23. WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.24. To reduce the risk of electric shock, the grounding of center pin of plug must be maintained.25. If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA NO.70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrodes. (See figure A)Safety StrapCaution: Pushing, pulling or climbing on the TV may cause the TV falling. Do not let chlidren climb or hang on the TV. Always place the TV on a sturdy, level, stable surface that can hold the weight of TV. And if possible, secure the TV according to the instruction below (Note: The fastening components such as screws are not supplied with TV). AN TE NN ALE AD I NWI REGR OU ND C LA M PGR OU ND IN G C O N DU CT OR S(N EC S EC TI O N 81 0- 21 )GR OU ND C LA M P SPO WE R SE RV I C E G RO UN DI NGEL EC TR OD E S Y S TE M(N EC A RT 2 5 0 , P AR TH )EL EC TR IC S E R V IC EEQ UI PM EN TAN TE NN ADI SC HA RG E U N I T(N EC S EC TI O N 81 0- 20 )Figure AFigure B Figure CNote: Above accessories are subject to change without notice.Before Turning On TVCheck AccessoriesCheck the accessories that are packed with your TV.Select TV LocationSelect a flat, stable table to place your TV set. Please follow the Safety Instructions when placing the TV. Setup TV Table StandPlease refer to TV Stand Installation guide in next page to carry out stand installing.Connection and UsingAfter placing your TV properly, you can connect the TV with power supply and cable components. For further information, see page 4 to page 5.AAA BATTERIESPART NO.: RE20QP80REMOTE CONTROLCH LI ST
.
PICTURESOUND

TV Stand Installation

TV LED40C45RQ is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out the installation according to the instructions below. The LED LCD panel can bescratched easily, so please:1. Choose an absolutely flat surface to place the TV on.2. Use soft cloth or cushion to face the TV panel. Do not put TV on the table directly.Always unplug the AC cord first when installing/removing the stand.Step OnePlace the TV faced down on a soft cloth or cushion to prevent the LED LCD panel from being damaged.Step TwoStep one: Insert the M6 mounting screws into the upper two wall mounting screw holes and fasten them (Figure B).Step two: Insert anchors to wall and connect the bolts and anchors with ropes or chains (Figure C).Model Number.LED40C45RQPart No.: RN0340R0102Please register your product at www.rca.com
English
Please keep your sales receipt and keep the record of the serial number and the date of purchase in order toreceive warranty parts and service.The serial number is located at the back of the TV.

LED LCD TV

User’s Manual

Made for Today.M6 Screws
Wall
TV STAND SCREWSSCREWSM4 x 12mm, 4pcsPart# RS01TM412HSCREWSM4 x 12mm, 3pcsPart# RS01PWA412HTTake the neck. Please align the screw holes of the neck and the TV, and then insert the 4 screws into the 4 holes on the neck and tighten them.
RCA LED40C45RQ

Need help?

Number of questions: 0

Do you have a question about the RCA LED40C45RQ or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other RCA LED40C45RQ owners to properly answer your question.

Index

View the manual for the RCA LED40C45RQ here, for free. This manual comes under the category LED TVs and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the RCA LED40C45RQ or do you need help? Ask your question here

RCA LED40C45RQ specifications

General
Brand RCA
Model LED40C45RQ
Product LED TV
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the RCA LED40C45RQ.

Is your question not listed? Ask your question here