View the manual for the Purell ES8 here, for free. This manual comes under the category soap dispensers and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Purell ES8 or do you need help? Ask your question here
The Purell ES8 is a touch-free soap dispenser designed for commercial use in high-traffic areas such as offices, schools or hospitals. The dispenser is made of durable materials and is specifically designed to withstand the wear and tear of everyday use. Its sleek and modern design complements any decor. The dispenser is powered by three D-cell batteries that are included in the package. The dispenser features a large sight window, allowing users to easily monitor the level of soap inside. The one-hand push operation makes it easy for users to access soap while minimizing the risk of cross-contamination and the spread of germs. The dispensing nozzle is ADA-compliant, ensuring that people with disabilities can also use it effortlessly. The Purell ES8 comes with a refillable bottle that holds up to 1200 ml of soap or hand sanitizer, depending on the product you choose. The dispenser can be programmed to provide one or two doses at a time, helping to reduce wastage and promote hygiene. The dispenser is easy to install, featuring a quick and hassle-free mounting system that allows for easy and secure installation. In conclusion, the Purell ES8 is a reliable and efficient touch-free soap dispenser designed to promote hand hygiene in commercial settings. Its durable construction, ADA-compliant dispensing nozzle, and large sight window make it a practical and convenient choice for any public space.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Purell ES8 below.
To install the Purell ES8 soap dispenser, ensure the mounting surface is clean and dry. Remove the dispenser from its packaging and place it securely on the wall using the provided mounting plate. Be sure to follow all local regulations and guidelines for installation.
Refilling the Purell ES8 dispenser is simple. Open the front cover of the dispenser by pushing the latch upwards. Remove the empty refill bag and discard it properly. Take the new refill bag, remove the cap, and insert it into the dispenser. Close the front cover securely, ensuring it snaps back into place.
If soap dispensing is not functioning as expected, first check that the refill bag is properly inserted and the front cover is securely closed. Ensure there is no blockage in the dispensing nozzle. If the issue persists, try replacing the batteries. If none of these steps solve the problem, contact customer support for further assistance.
To adjust the soap dosage on the Purell ES8 dispenser, locate and open the level sensor cover at the back of the dispenser. Use the provided adjustment key to turn the dosage control dial to your desired setting, ranging from minimum to maximum. Close the level sensor cover once you have made the desired adjustment.
The Purell ES8 dispenser is designed for use with Purell ES8 soap refills specifically. It is recommended to only use the approved Purell refills to ensure optimal performance and avoid any potential damage to the dispenser. The use of other soaps or refills may not be compatible with the dispenser's mechanisms.
Yes, the manual of the Purell ES8 is available in English .
Is your question not listed? Ask your question here