View the manual for the Pride Jazzy Air 2 here, for free. This manual comes under the category wheelchairs and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Pride Jazzy Air 2 or do you need help? Ask your question here
The Pride Jazzy Air 2 is a wheelchair designed to provide mobility assistance to individuals with limited physical abilities. This wheelchair offers an innovative feature that allows the user to elevate the seat height, providing them with improved accessibility and independence. The Jazzy Air 2 is specifically engineered to cater to the needs of wheelchair users, ensuring optimal functionality and comfort. It is equipped with a sturdy frame and high-quality materials that enhance its durability and reliability. This wheelchair offers advanced maneuverability capabilities with its powerful motors and responsive controls. The precise handling allows the user to navigate various indoor and outdoor terrains with ease. The Jazzy Air 2 incorporates a range of safety features to ensure the well-being of the user. It includes anti-tip wheels and a stable base that promotes stability and prevents accidents or falls. The wheelchair also comes with a secure seating system to provide additional security during use. Comfort is a key aspect of the Jazzy Air 2. The wheelchair is designed with a plush seat and a fully adjustable footrest, allowing the user to find their desired position for optimal comfort. It also offers a sleek and modern design, creating a visually appealing wheelchair option. Overall, the Pride Jazzy Air 2 is a reliable and versatile wheelchair that offers improved accessibility, advanced maneuverability, and enhanced comfort. It is an ideal choice for individuals seeking greater independence and mobility assistance.
| Brand | Pride |
| Model | Jazzy Air 2 |
| Product | wheelchair |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pride Jazzy Air 2 below.
To turn on the Pride Jazzy Air 2 wheelchair, follow these steps: 1. Locate the power switch on the control panel of the wheelchair. It is usually located near the joystick. 2. Make sure the wheelchair is in a safe and stable position, with the seat in the lowest position. 3. Press and hold the power switch for a few seconds until you see the control panel light up and hear a beep sound. 4. Release the power switch once the control panel is activated. 5. The wheelchair is now turned on and ready to use. Please note that if the wheelchair does not turn on, you should check the battery level and ensure that it is adequately charged. If the battery is low, connect the wheelchair to the charger and allow it to charge for the recommended time. Remember to always follow the safety guidelines provided in the manual and consult a professional if you encounter any issues with the operation of the wheelchair.
If the Pride Jazzy Air 2 wheelchair does not move when you try to use it, you can follow these troubleshooting steps: 1. Check the battery condition meter on the control panel. If it does not light up when you turn on the power, there may be an issue with the battery. 2. Ensure that the harness connections are tight and secure. Loose connections can prevent the wheelchair from functioning properly. 3. Reset the circuit breaker if necessary. The circuit breaker is located on the control panel and can be reset by pressing the reset button. 4. Verify that the battery connections are secure. Loose or disconnected battery connections can cause the wheelchair to not move. 5. If the above steps do not resolve the issue, you can load test the batteries using a battery load tester. Disconnect both batteries before load testing and follow the instructions provided with the load tester. If either of the batteries fails the load test, both batteries should be replaced. 6. If the wheelchair still does not power up or move after following these steps, it is recommended to contact your authorized Pride Provider for further assistance. Remember to always prioritize your safety and consult a professional if you are unsure about any troubleshooting steps.
To adjust the seat height of the Pride Jazzy Air 2 wheelchair, follow these steps: 1. Locate the armrest height adjustment setscrews on both sides of the wheelchair. 2. Loosen the setscrews to allow the armrests to move up and down. 3. Raise or lower the armrests to the desired height. 4. Tighten the setscrews to secure the armrests in place. Additionally, you can adjust the controller position for left-hand or right-hand use: 1. Turn off the power to the controller. 2. Flip up the armrest so it is perpendicular to the floor. 3. Loosen the setscrew on the controller bracket. 4. Slide the controller into or out of the armrest to the desired position. 5. Tighten the setscrew to secure the controller. Remember to always follow the safety guidelines provided in the manual and consult a professional if you are unsure about any adjustments.
If the Pride Jazzy Air 2 wheelchair makes unusual noises while in use, you can follow these steps to troubleshoot the issue: 1. Stop using the wheelchair and ensure it is in a safe and stable position. 2. Check for any loose or damaged parts, such as loose screws or bolts. Tighten or replace any loose or damaged parts as necessary. 3. Inspect the wheels and tires for any debris, such as rocks or dirt. Remove any debris that may be causing the noise. 4. Check the motor connections and wiring. Ensure that all connections are secure and there are no loose or frayed wires. 5. Examine the battery connections. Make sure they are tight and secure. 6. If the noise persists, contact your authorized Pride Provider for further assistance. Remember to always prioritize your safety and consult a professional if you are unsure about any troubleshooting steps.
To assemble the Pride Jazzy Air 2 wheelchair, follow these steps: 1. Remove the shrouds from the power chair. 2. Remove the right battery cover. 3. Connect the battery and press the on/off button to power on the controller. 4. Press the actuator button to raise the actuator to the highest position. 5. Power down the wheelchair by pressing the on/off button. 6. Place the seat onto the seat plate, ensuring not to pick up the seat frame by the armrests. 7. Insert the front bolt with a washer through the slot in the seat plate and align it with the tapped hole in the underside of the seat. Start tightening by hand, leaving the bolts loose. 8. Repeat step 7 for the other side. 9. Slide the seat forward or backward to align the rear bolt holes with washers to the desired position. Start tightening by hand. 10. Tighten all of the bolts with the provided hex key. 11. Install the armrests into the receivers and tighten the setscrews at the desired height. 12. Place the headrest into the back of the seat and adjust it to the desired height. 13. Install the controller on the desired armrest and adjust it to the desired position. Tighten the setscrew. 14. Route the controller and lighting harnesses along the inside of the armrest and secure them with the supplied wire-ties. 15. Flip up the armrest and secure the harnesses along the armrest receiver and seat plate with the supplied wire-ties. Please note that these steps are a general guide, and it is important to refer to the specific instructions provided in the manual for the Pride Jazzy Air 2 wheelchair for accurate assembly.
Yes, the manual of the Pride Jazzy Air 2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pride and is the answer not in the manual?
Question and answer
Number of questions: 5My Air 2 power chair has lost power and will not restart. I believe I overloaded the circuit by trying to force my chair through a location that it did not fit. I am looking for a power reset button because I believe I need to reset the circuit breaker. I am not sure where the reset button is found on my jazzy air 2. Can someone tell me where to find the reset button?
1 comment
@Erik Voogd
What progrmmer do I buy for my Jazzy 2 ( I level ) and from what website? I'm wondering if a Penny Giles PP1 is compatible?
My chair won't charge there's power to the charging block but when I plug it in to my chair the charger light don't light up. I read something about checking a fuse but where is it at?
1 comment
@Larice
Where is the reset button for jazzy air 2
Will not lift up