Pride Jazzy 614 HD manual

Pride Jazzy 614 HD
7.1 · 1
PDF manual
 · 44 pages
English
manualPride Jazzy 614 HD
Jazzy 614 Series www.pridemobility.com 29

VI. BATTERIES AND CHARGING

Battery Break-in
To break in new batteries for maximum efficiency:
1. Fully recharge any new battery prior to its initial use. This brings the battery up to about 90% of its peak
performance level.
2. Operate your power chair throughout the house and yard. Move slowly at first, and do not travel too far until
you become accustomed to the controls and break in the batteries.
3. Give the batteries another full charge of 8 to 14 hours and operate your power chair again. The batteries will
now perform at over 90% of their potential.
4. After four or five charging cycles, the batteries will top off at 100% charge and last for an extended period.
Frequently Asked Questions (FAQs)
How does the charger work?
The battery charger takes the standard electrical outlet voltage of 120 VAC (alternating current) and converts it
to 24 VDC (direct current). The power chair batteries use direct current to run your power chair. When the battery
voltage is low, the charger works harder to charge the battery. As the battery voltage approaches full charge, the
charger does not work as hard to complete the charging cycle. When the battery is fully charged, the amperage
from the charger is nearly at zero. This is how the charger maintains a charge but does not overcharge the battery.
Can I use a different battery charger?
You should use the charger supplied with the power chair. It is the safest, most efficient tool to charge the batter-
ies. We do not recommend using other types of chargers (e.g., an automotive battery charger).
NOTE: Your power chair’s charger will not operate after the batteries have been discharged to nearly zero
voltage. If this happens, call your authorized Pride Provider for assistance.
Figure 20. Battery Charging
To charge the batteries using the off-board charger:
1. Position the front of your power chair next to a
standard electrical outlet.
2. Be certain the controller power is turned off.
3. Plug the off-board charger into the off-board char-
ger/programming socket on the controller. See fig-
ure 20.
4. Plug the off-board charger into the electrical outlet.
NOTE: The LED lights on the charger indicate differ-
ent charger conditions at various times: charger on,
charging in progress, and charging complete. Refer to
the manual supplied with the charger for a complete
explanation of these indicators.
5. When the batteries are fully charged, unplug the off-
board charger from the electrical outlet and then
from the controller.

View the manual for the Pride Jazzy 614 HD here, for free. This manual comes under the category wheelchairs and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Pride Jazzy 614 HD or do you need help? Ask your question here

Need help?

Do you have a question about the Pride and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 9
M
Mike PetersonJune 10, 2024

How does the seat move forward and backwards

D
DONALDDecember 19, 2023

what is the right way to install and hook ujp the batteris on a JAZZT 614 HD

D
Dorothy MizellMay 3, 2024

How do you remove cover over batteries

How do you remove cover over batteries
zoom-in
View photo
D
Dawn May 16, 2024

How do you turn off the jazzy 614 HD.

J
Joseph March 30, 2024

The chair controller light flash and that's all it does. and then the chair turns itself off.

D
Deanna Conerly September 6, 2023

How much does a right motor cost

M
MarkNovember 6, 2023

How to adjust the joystick turn speed

J
JohnDecember 22, 2023

When I turn on my chair it just blinks

R
RonaldJuly 12, 2023

Does a Jazzy 614 HD have any gear boxes that needs oil change?

The Pride Jazzy 614 HD is a motorized wheelchair designed to provide increased mobility for individuals with physical disabilities. It features a sturdy and durable frame that can support weight up to 450 pounds. The chair is equipped with two large 14-inch drive wheels that provide excellent traction and control, while the casters in the rear provide stability. The Jazzy 614 HD includes a comfortable padded seat and backrest, as well as adjustable armrests that can be flipped up or removed for easy transfers. The chair's joystick controller is easy to use and allows for seamless maneuvering in tight spaces. In terms of performance, the Jazzy 614 HD boasts a top speed of 4.25 mph and a maximum range of up to 11 miles on a single charge. The chair can handle inclines up to 6 degrees and features a turning radius of just 22.75 inches. Other features of the Jazzy 614 HD include a programmable controller, adjustable footplate, and a high-back seat with headrest. The chair also has several optional upgrades available, including a power elevating seat and a power elevating legrest. Overall, the Pride Jazzy 614 HD is a reliable and capable wheelchair that offers increased mobility and independence for individuals with physical disabilities.

General
BrandPride
ModelJazzy 614 HD
Productwheelchair
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pride Jazzy 614 HD below.

How do I operate the joystick on my Pride Jazzy 614 HD?

To operate the joystick, simply use your hand to move it in the desired direction. Push it forward to go forward, pull it back to go backward, and move it to the left or right for turning.

How can I adjust the seat height on my wheelchair?

To adjust the seat height, locate the seat elevation lever on the side of your wheelchair. Pull it upward to raise the seat or push it downward to lower the seat. Release the lever once you have reached the desired height.

How do I activate the power tilt function on my Pride Jazzy 614 HD?

To activate the power tilt function, find the tilt switch on the control panel. Press and hold the switch in the direction labeled "tilt" until the seat reaches the desired tilt angle. Release the switch to stop the tilt function.

How can I adjust the armrests on my wheelchair?

To adjust the armrests, locate the armrest adjustment knobs on either side of the wheelchair. Loosen the knobs by turning them counterclockwise, then move the armrests up, down, forward, or backward to achieve your preferred position. Finally, tighten the knobs by turning them clockwise to secure the armrests in place.

How do I engage the braking system on my Pride Jazzy 614 HD?

To engage the braking system, locate the brake levers at the sides of the wheelchair. Push the levers downward firmly to activate the brakes. Make sure both levers are engaged before leaving the wheelchair unattended or during transfers to ensure safety. To release the brakes, pull the levers upward.

Is the manual of the Pride Jazzy 614 HD available in English?

Yes, the manual of the Pride Jazzy 614 HD is available in English .

Is your question not listed? Ask your question here

No results