Pride Jazzy 614 HD manual

Pride Jazzy 614 HD
7.1 · 1
PDF manual
 · 44 pages
English
manualPride Jazzy 614 HD
Jazzy 614 Series www.pridemobility.com 23
SEAT TOWERS
SEAT POSTS

V. COMFORT ADJUSTMENTS

COMFORT ADJUSTMENTS
After becoming familiar with your power chair’s operation, you may find the need to make some adjustments to
increase your comfort, such as seat height and angle, armrest angle, foot platform height and angle, and controller
position.
NOTE: If your power chair is equipped with a Synergy Seat or TRU-Balance Power Positioning System, refer
to the seat adjustment information contained in separate manuals. If your power chair is equipped with a
contoured seating system, refer to the following information.
WARNING! The center of gravity of your power chair was factory set to a position that meets the
needs of the demographic majority of users. Your authorized Pride Provider has evaluated your
power chair and made any necessary adjustments to suit your specific requirements. Do not
change your seating configuration without first contacting Pride Mobility Products or your
authorized Pride Provider.
WARNING! Some power chair components are heavy. You may need assistance to lift or carry
them. Please refer to the specifications table for specific component weights before you
disassemble the power chair.
WARNING! Remove the occupant from the power chair before making any adjustments.
You may need the following to make comfort
adjustments:
metric/standard socket set and ratchet
adjustable wrench
thread lock
Seat Height and Seat Angle Adjustment
You can change the seat height to one of four positions
by raising the front and rear trapeze bars. If you raise
or lower only one trapeze bar (front or rear), you can
also change the seat base angle (dump).
To change the seat height:
1. Turn off the power to the controller.
2. Disconnect the controller connector(s) from the
power base. See figure 7.
3. Flip up the seat latch safety. See figure 13.
4. Squeeze the seat latch and release the seat from the
front trapeze bar.
5. Slide the seat forward and remove it from the
power base.
6. Loosen the setscrews on the seat towers. See figure 14.
7. Loosen the screws that attach the trapeze bars to the
seat posts. See figure 14.
8. Remove the retaining clips that secure the seat
posts to the power base. See figure 14.
9. Move the trapeze bars up or down to the desired
height.
NOTE: Change the seat dump by raising or lowering
only one set of towers (front or back).
Figure 14. Seat Adjustment - Trapeze Bars
RETAINING
CLIPS
SCREWS
Figure 13. Seat Height Adjustment - Seat Latch Safety
TRAPEZE
BARS

View the manual for the Pride Jazzy 614 HD here, for free. This manual comes under the category wheelchairs and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Pride Jazzy 614 HD or do you need help? Ask your question here

Need help?

Do you have a question about the Pride and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 9
M
Mike PetersonJune 10, 2024

How does the seat move forward and backwards

D
DONALDDecember 19, 2023

what is the right way to install and hook ujp the batteris on a JAZZT 614 HD

D
Dorothy MizellMay 3, 2024

How do you remove cover over batteries

How do you remove cover over batteries
zoom-in
View photo
D
Dawn May 16, 2024

How do you turn off the jazzy 614 HD.

J
Joseph March 30, 2024

The chair controller light flash and that's all it does. and then the chair turns itself off.

D
Deanna Conerly September 6, 2023

How much does a right motor cost

M
MarkNovember 6, 2023

How to adjust the joystick turn speed

J
JohnDecember 22, 2023

When I turn on my chair it just blinks

R
RonaldJuly 12, 2023

Does a Jazzy 614 HD have any gear boxes that needs oil change?

The Pride Jazzy 614 HD is a motorized wheelchair designed to provide increased mobility for individuals with physical disabilities. It features a sturdy and durable frame that can support weight up to 450 pounds. The chair is equipped with two large 14-inch drive wheels that provide excellent traction and control, while the casters in the rear provide stability. The Jazzy 614 HD includes a comfortable padded seat and backrest, as well as adjustable armrests that can be flipped up or removed for easy transfers. The chair's joystick controller is easy to use and allows for seamless maneuvering in tight spaces. In terms of performance, the Jazzy 614 HD boasts a top speed of 4.25 mph and a maximum range of up to 11 miles on a single charge. The chair can handle inclines up to 6 degrees and features a turning radius of just 22.75 inches. Other features of the Jazzy 614 HD include a programmable controller, adjustable footplate, and a high-back seat with headrest. The chair also has several optional upgrades available, including a power elevating seat and a power elevating legrest. Overall, the Pride Jazzy 614 HD is a reliable and capable wheelchair that offers increased mobility and independence for individuals with physical disabilities.

General
BrandPride
ModelJazzy 614 HD
Productwheelchair
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pride Jazzy 614 HD below.

How do I operate the joystick on my Pride Jazzy 614 HD?

To operate the joystick, simply use your hand to move it in the desired direction. Push it forward to go forward, pull it back to go backward, and move it to the left or right for turning.

How can I adjust the seat height on my wheelchair?

To adjust the seat height, locate the seat elevation lever on the side of your wheelchair. Pull it upward to raise the seat or push it downward to lower the seat. Release the lever once you have reached the desired height.

How do I activate the power tilt function on my Pride Jazzy 614 HD?

To activate the power tilt function, find the tilt switch on the control panel. Press and hold the switch in the direction labeled "tilt" until the seat reaches the desired tilt angle. Release the switch to stop the tilt function.

How can I adjust the armrests on my wheelchair?

To adjust the armrests, locate the armrest adjustment knobs on either side of the wheelchair. Loosen the knobs by turning them counterclockwise, then move the armrests up, down, forward, or backward to achieve your preferred position. Finally, tighten the knobs by turning them clockwise to secure the armrests in place.

How do I engage the braking system on my Pride Jazzy 614 HD?

To engage the braking system, locate the brake levers at the sides of the wheelchair. Push the levers downward firmly to activate the brakes. Make sure both levers are engaged before leaving the wheelchair unattended or during transfers to ensure safety. To release the brakes, pull the levers upward.

Is the manual of the Pride Jazzy 614 HD available in English?

Yes, the manual of the Pride Jazzy 614 HD is available in English .

Is your question not listed? Ask your question here

No results