Pride Jazzy 614 HD manual

Pride Jazzy 614 HD
7.1 · 1
PDF manual
 · 44 pages
English
manualPride Jazzy 614 HD
22 www.pridemobility.com Jazzy 614 Series
WIRE TIES
REAR
EXTRUSION

IV. ASSEMBLY

Seat Installation
It may be necessary to install the seat either prior to ini-
tial operation or after transporting your power chair.
Most seats are attached to the power base with the Uni-
versal Mounting System (UMS). The UMS consists of
universal parts that may be attached to any medium-
back or high-back seat, regardless of seat width or seat
depth. The two main components are aluminum extru-
sions mounted to the seat base. These extrusions attach
to a pair of trapeze bars that are mounted to the power
base. See figure 11.
WARNING! Do not pick up the seat
frame by the armrests. They are free to
pivot, and you may lose control of the
seat if they do so.
To install the seat:
1. Tilt the seat back and slide the rear extrusion onto
the rear trapeze bar. See figure 11.
2. Lower the front extrusion onto the front trapeze bar
until the seat locks into place.
3. Flip the seat latch safety down.
WARNING! Make sure the seat latch
safety is flipped down before using
your power chair.
4. Install the controller into one of the armrests.
Tighten the setscrew. See figure 11.
5. Lift the armrest straight up, then route the controller
harness so that it cannot be pinched in the seat hinge
as shown in figure 11.
Figure 11. Universal Mounting System
SETSCREW
SEAT
LATCH
SAFETY
TRAPEZE BARS
NOTE: It is important that the armrest be lifted
straight up prior to securing the controller harness
with wire ties.
6. Plug the controller connector into the power base.
See figure 7.
7. Secure the controller harness to the armrest receiver
with one or more wire ties. See figure 12.
MANDATORY! Prevent controller
harness damage! Avoid routing the
controller harness on the outside of the
armrest pad. Route the harness under
the armrest or toward the inside of the
armrest pad. Use correct tie-down
points for the controller harness to
prevent the harness from getting
caught in the drive tires, pinched in the
seat frame, or damaged when passing
through doorways.
Figure 11. Universal Mounting System
Figure 12. Controller Harness Routing

View the manual for the Pride Jazzy 614 HD here, for free. This manual comes under the category wheelchairs and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Pride Jazzy 614 HD or do you need help? Ask your question here

Need help?

Do you have a question about the Pride and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 9
M
Mike PetersonJune 10, 2024

How does the seat move forward and backwards

D
DONALDDecember 19, 2023

what is the right way to install and hook ujp the batteris on a JAZZT 614 HD

D
Dorothy MizellMay 3, 2024

How do you remove cover over batteries

How do you remove cover over batteries
zoom-in
View photo
D
Dawn May 16, 2024

How do you turn off the jazzy 614 HD.

J
Joseph March 30, 2024

The chair controller light flash and that's all it does. and then the chair turns itself off.

D
Deanna Conerly September 6, 2023

How much does a right motor cost

M
MarkNovember 6, 2023

How to adjust the joystick turn speed

J
JohnDecember 22, 2023

When I turn on my chair it just blinks

R
RonaldJuly 12, 2023

Does a Jazzy 614 HD have any gear boxes that needs oil change?

The Pride Jazzy 614 HD is a motorized wheelchair designed to provide increased mobility for individuals with physical disabilities. It features a sturdy and durable frame that can support weight up to 450 pounds. The chair is equipped with two large 14-inch drive wheels that provide excellent traction and control, while the casters in the rear provide stability. The Jazzy 614 HD includes a comfortable padded seat and backrest, as well as adjustable armrests that can be flipped up or removed for easy transfers. The chair's joystick controller is easy to use and allows for seamless maneuvering in tight spaces. In terms of performance, the Jazzy 614 HD boasts a top speed of 4.25 mph and a maximum range of up to 11 miles on a single charge. The chair can handle inclines up to 6 degrees and features a turning radius of just 22.75 inches. Other features of the Jazzy 614 HD include a programmable controller, adjustable footplate, and a high-back seat with headrest. The chair also has several optional upgrades available, including a power elevating seat and a power elevating legrest. Overall, the Pride Jazzy 614 HD is a reliable and capable wheelchair that offers increased mobility and independence for individuals with physical disabilities.

General
BrandPride
ModelJazzy 614 HD
Productwheelchair
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pride Jazzy 614 HD below.

How do I operate the joystick on my Pride Jazzy 614 HD?

To operate the joystick, simply use your hand to move it in the desired direction. Push it forward to go forward, pull it back to go backward, and move it to the left or right for turning.

How can I adjust the seat height on my wheelchair?

To adjust the seat height, locate the seat elevation lever on the side of your wheelchair. Pull it upward to raise the seat or push it downward to lower the seat. Release the lever once you have reached the desired height.

How do I activate the power tilt function on my Pride Jazzy 614 HD?

To activate the power tilt function, find the tilt switch on the control panel. Press and hold the switch in the direction labeled "tilt" until the seat reaches the desired tilt angle. Release the switch to stop the tilt function.

How can I adjust the armrests on my wheelchair?

To adjust the armrests, locate the armrest adjustment knobs on either side of the wheelchair. Loosen the knobs by turning them counterclockwise, then move the armrests up, down, forward, or backward to achieve your preferred position. Finally, tighten the knobs by turning them clockwise to secure the armrests in place.

How do I engage the braking system on my Pride Jazzy 614 HD?

To engage the braking system, locate the brake levers at the sides of the wheelchair. Push the levers downward firmly to activate the brakes. Make sure both levers are engaged before leaving the wheelchair unattended or during transfers to ensure safety. To release the brakes, pull the levers upward.

Is the manual of the Pride Jazzy 614 HD available in English?

Yes, the manual of the Pride Jazzy 614 HD is available in English .

Is your question not listed? Ask your question here

No results