View the manual for the Prevention WS-820 here, for free. This manual comes under the category sphygmomanometer and has been rated by 4 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Prevention WS-820 or do you need help? Ask your question here
The sphygmomanometer Prevention WS-820 is a medical device used for measuring blood pressure. It is designed to provide accurate and reliable results in a clinical setting. The WS-820 is constructed with high-quality materials to ensure durability and long-term use. This sphygmomanometer features a clear and easy-to-read display, allowing healthcare professionals to quickly and accurately interpret blood pressure readings. The device is equipped with a manual inflation system, allowing for precise control over the pressure applied to the arm during measurement. To ensure accuracy, the WS-820 has been calibrated to meet industry standards. It is also designed to minimize the risk of user error, with clear instructions provided for proper placement and usage. The device uses a standard cuff size that fits most adult patients, ensuring convenience and ease of use. The WS-820 sphygmomanometer offers reliable and efficient measurement capabilities, making it a valuable tool for healthcare professionals. Its compact design and lightweight construction enhance portability and enable easy use in various clinical settings. In conclusion, the sphygmomanometer Prevention WS-820 is a reliable and durable medical device that provides accurate blood pressure measurements. Its user-friendly design and standard cuff size make it suitable for a wide range of patients. This sphygmomanometer is an essential tool for healthcare professionals in monitoring and managing blood pressure.
| Brand | Prevention |
| Model | WS-820 |
| Product | sphygmomanometer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Prevention WS-820 below.
Systolic pressure is the top number that the blood pressure monitor will indicate. Systolic pressure refers to the amount of pressure in your arteries during the contraction of your heart muscle.
Diastolic pressure is the lowest number that the blood pressure monitor will indicate. The bottom number refers to your blood pressure when your heart muscle is between beats.
A normal blood pressure is about 120/80.
To ensure accurate readings, position the cuff approximately 2-3 centimeters above the elbow joint, making sure it is snug but not too tight.
The systolic value is the higher number displayed on the monitor, representing the maximum pressure in your arteries during a heartbeat. The diastolic value, on the other hand, is the lower number indicating the minimum pressure between heartbeats.
Inflate the cuff by squeezing the rubber bulb until it reaches a pressure that exceeds your normal systolic value, usually around 160-180 mmHg.
Maintain consistent pressure on the cuff's release valve to gradually and controlledly release air. This ensures accurate tracking of your blood pressure as it decreases.
It is recommended to have your sphygmomanometer calibrated and serviced at least once a year to verify its accuracy. Additionally, regularly check the tubing, bulb, and cuff for any damage or defects to ensure reliable performance.
Yes, the manual of the Prevention WS-820 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Prevention and is the answer not in the manual?
Question and answer
Number of questions: 4Lately, while using the digital NISSEI WS 820 sphygmomanometer on different occasions, it is showing err-3. I have already changed the batteries and obtained no result. Can you assist me with the next steps to follow? Thank you very much for your attention in answering my question.
What is the problem with err3
1 comment
How can I stop the err3 ?
What’s wrong if Err-2 is showing
What was the problem if Err-2 come out
1 comment
How do you delete i When the memory is all up delete it