Presto 06856 manual

Presto 06856
8.8 · 1
PDF manual
 · 4 pages
English
manualPresto 06856
2

Important Cord Information

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
A short, detachable power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. An extension
cords may be used if care is properly exercised in their use. If an extension cord is used, the marked electrical rating of the extension
cord should be at least as great as the electrical rating of the appliance. The extension cord should be arranged so that it will not drape
over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
Connect the power supply cord to a 120VAC electrical outlet only.

How to Assemble

1. Place the skillet upside down on a table or counter.
2. Remove the four screws from the mounting projections on the skillet body and set aside.
3. Position the leg handle assemblies on the skillet, lining up the holes in the legs with the mounting projections on the skillet.
4. Replace the screws and fasten securely (Fig. A). When properly assembled, the skillet should sit level on
the table or counter.
NOTICE: Continuing to tighten, once secure, can result in stripping of screws or cracking of handles and legs.
5. Remove the two screws and the metal and silicone washers from the cover handle. Use the screws and
washers to attach the handle to the cover. For easiest alignment, hold the handle so the screw holes are
facing up. Position the inverted cover over the handle and align the cover holes with the handle holes.
Secure the handle to the cover with the silicone washers, metal washers, and screws (Fig. B). Tighten
screws using a Phillips type screwdriver until secure.
NOTICE: Continuing to tighten, once secure, can result in stripping of screws or cracking of handle or cover.
NOTICE: This skillet is not intended to be used as a warming tray, hot plate, or for heating any cookware.
Using this product for purposes different from those specified in the instruction manual may cause damage
to the product and will void the product warranty.

How to Use

Before using for the first time, wash the skillet and cover in warm, soapy water, rinse, and dry. Do not
immerse Control Master
®
heat control in water or let it come in contact with any liquid.
NOTICE: This skillet is not intended to be used as a warming tray, hot plate, or for heating any cookware nor
to melt wax, gels, plastics, glue, or other materials for making candles or for other hobbyist activities, or in
any commercial or business application. Using this application for the purposes different from those specified
in the instruction manual may cause damage to the appliance and will void warranty.
1. Place skillet on a dry, level, heat-resistant surface away from walls, cabinets, and other objects.
NOTICE: To prevent possible heat damage to your countertop, place a heat-resistant counter protector,
such as aluminum foil, under the skillet. Take care not to place the counter protector between the rubber
feet of the skillet and the counter.
2. Insert the Control Master
®
heat control probe into the skillet so the two electrical pins on the skillet are fully inserted into the heat
control. Connect cord to a 120VAC electrical wall outlet only.
3. Turn Control Master
®
heat control (Fig. C) to desired temperature; see page 3 for cooking temperatures. Remove cover and preheat
skillet. Pilot light goes off when selected temperature is reached; this takes approximately 5 to 10 minutes.
NOTE: Occasionally you may hear a pop or clicking sound while the skillet is preheating; this is due to the expansion of the metal
as it heats. It is normal. You may also notice this sound as the unit cools down.
4. Prepare food for cooking. Because the skillet features a ceramic nonstick surface, food may be prepared with little or no oil.
NOTICE: Avoid using no stick cooking sprays as they may cause the cooking surface to become tacky.
5. Place food on the skillet and cook according to the temperature-timetable. Adjust the heat according to personal preference and the
particular food being cooked. The pilot light will go on and off indicating the selected temperature is being maintained.
Use nylon, plastic, wooden, or rubber utensils for best results. Do not use metal utensils as they may scratch the nonstick finish. Do
Fig. A
Heat selector
Control Master
®
heat control
Pilot
light
Fig. B
Cover handle
Inverted cover
Screws
Silicone washers
Metal washers
Fig. C

Manual

View the manual for the Presto 06856 here, for free. This manual comes under the category pans and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Presto 06856 or do you need help? Ask your question here

Need help?

Do you have a question about the Presto and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Presto 06856 specifications

Below you will find the product specifications and the manual specifications of the Presto 06856.

General
BrandPresto
Model06856 | 06856
Productpan
EAN0075741068565
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Power
Power1500 W
AC input voltage120 V
Features
Non-stick coatingYes
Lid materialGlass
Lid typeDetachable lid
Housing materialAluminium, Ceramic
Easy to cleanYes
ShapeRectangular
Product colorBlack, Grey
Weight & dimensions
Width555.4 mm
Depth311.1 mm
Height201.4 mm
Weight3288 g
Package width463.5 mm
Package depth149 mm
Package height338 mm
Package weight4191 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Presto 06856 below.

What is the weight of the Presto 06856?

The Presto 06856 has a weight of 3288 g.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

What is the height of the Presto 06856?

The Presto 06856 has a height of 201.4 mm.

What is the width of the Presto 06856?

The Presto 06856 has a width of 555.4 mm.

What is the depth of the Presto 06856?

The Presto 06856 has a depth of 311.1 mm.

Is the manual of the Presto 06856 available in English?

Yes, the manual of the Presto 06856 is available in English .

Is your question not listed? Ask your question here

No results