PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC PT

Copyright © 2021 VARO P á g i n a | 8 www.varo.com
Antes de serrar madeira, aglomerado de madeira, materiais de construção, etc., com as
lâminas de serra verifique a existência de objetos estranhos tais como pregos, parafusos ou
similar. Se necessário, remova objetos estranhos ou use lâminas de serra para metal.
8.3.3 Lixar
A potência abrasiva e o resultado de trabalho são principalmente determinados pela seleção
da folha de lixa, do número de vibrações selecionado e da força de pressão.
Apenas folhas de lixar em perfeito estado proporcionam uma perfeita potência abrasiva e
poupam a ferramenta elétrica.
Trabalhar com uma força de pressão uniforme para aumentar a vida útil das folhas de lixar.
Um aumento demasiado da força de pressão não leva a uma potência abrasiva mais alta,
mas a um desgaste mais forte da ferramenta elétrica e da folha de lixar.
Para lixar ângulos, cantos e áreas de difícil acesso também é possível trabalhar apenas com
a ponta ou com o canto da placa de lixar.
Ao lixar num ponto só, a lixa pode se aquecer fortemente.
Reduzir o número de oscilações e permitir que a lixa arrefeça em intervalos regulares.
Jamais utilizar uma folha de serra com a qual foi processado metal, para processar outros
materiais.
8.3.4 Raspar
Para raspar deverá selecionar uma alta frequência de vibrações. Trabalhar sobre uma
superfície macia (p.ex. madeira), num ângulo plano e com reduzida força de pressão. Caso
contrário a espátula poderá cortar a superfície.

9 LIMPEZA E MANUTENÇÃO

Antes de levar a cabo intervenções no equipamento, remova a ficha da
tomada.
Mantenha as ranhuras de ventilação da máquina limpas, de modo a evitar o
sobreaquecimento do motor.
Limpe regularmente a carcaça da máquina com um pano macio, de preferência após
cada utilização.
Mantenha as ranhuras de ventilação livres de poeira e sujidade.
Se a sujidade não puder ser eliminada, use um pano macio humedecido com água e
sabão.
Nunca utilize solvente tais como o petróleo, álcool, água amoniacal, etc. Estes solventes
poderão danificar as peças de plástico.
Certifique-se que nenhuma água poderá entrar na ferramenta elétrica!

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results