PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC ES

Copyright © 2021 VARO P á g i n a | 6 www.varo.com
7.1 Instalación de la placa de lijado/ hoja de sierra/ espátula (Fig. 1)
ADVERTENCIA: Antes de ensamblar y ajustar, desconecte siempre el
enchufe de la toma de corriente.
Preste atención a las herramientas afiladas tales como espátulas, hojas de sierra o cuchillas
de corte.
1 Afloje la brida de liberación rápida (7) tirando la palanca de liberación rápida (1)
completamente abierta.
2 Gire la palanca de liberación rápida en sentido antihorario hasta que se afloje la placa de
sujeción.
3 Coloque la hoja de sierra de instalación rápida, la placa de lijado o la espátula de
manera que quede orientadas hacia el mandril de toma situado entre la brida de cubierta
(9) y la brida de liberación rápida (7). Empuje el accesorio y colóquelo firmemente en los
pasadores de posicionamiento (8). Preste atención a que la placa de sujeción quede
posicionada correctamente en el soporte de la máquina. En caso contrario no se podrá
girar la palanca de liberación rápida.
4 Sujete con la palanca de liberación rápida (1), gírela en sentido horario para fijar la placa
de sujeción y el accesorio.
5 Verifique que la palanca de liberación rápida esté suficientemente apretada.
6 Tire de la palanca de liberación rápida hacia abajo y gírela hasta que quede sobre el
soporte.
7 Empuje la palanca de liberación rápida en el soporte.
8 Retire el accesorio siguiendo el procedimiento en orden inverso.
ADVERTENCIA: Durante el funcionamiento, esta herramienta está equipada
con accesorios de instalación rápida; no utilice accesorios inadaptados.
ADVERTENCIA: Verifique el apoyo firme de la herramienta/accesorio Un
apoyo incorrecto o no firme de las herramientas/accesorios puede aflojarse
durante el funcionamiento y representar un riesgo.
7.2 Instalación/Cambio del papel de lija
Con gancho de sujeción y sistema de liberación rápida.
Coloque el papel de lija y presione con la mano.
Presione el papel de lija empujando de manera breve y firme sobre la superficie plana de
la placa de lijado (12) y encienda después la herramienta.
Esto garantiza una buena adherencia y previene un desgaste precoz.
Si se desgasta el punto, retire el papel de lija, gírelo 120º y colóquelo otra vez o cámbielo.
7.3 Montaje del dispositivo de extracción de polvo (Fig. 4)
Tome el adaptador de polvo (10) y atorníllelo en la parte inferior de la máquina. Recuerde que
el tornillo debe estar en la parte inferior del adaptador de polvo; de esta manera se le puede
atornillar con cuidado en el agujero. Una vez montada la pieza en la máquina, se puede
instalar el tubo para polvo (11) en el adaptador. Empujar con firmeza el tubo. Se puede
siempre ajustar la dirección del tubo moviéndolo un poco en la dirección deseada.

8 OPERACIÓN

8.1 Encendido / Apagado (Fig. 5)
Verifique antes que el cable y el enchufe no estén dañados.
Conecte el enchufe en la toma de corriente.

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results