PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC DE

Copyright © 2021 VARO S e i t e | 6 www.varo.com
1 Die Klemme (7) der Schnellspannung lösen, indem der Hebel (1) der Schnellspannung
voll geöffnet wird.
2 Den Hebel der Schnellspannung gegen den Uhrzeigersinn drehen, bis die Klemmplatte
gelöst ist.
3 Das Sägeblatt, die Schleifplatte oder den Schaber (Schnelleinsätze) auf die Außenwelle
aufsetzen, die sich zwischen der Klemme für die Abdeckung (9) und der Klemme (7) für
die Schnellspannung befindet. Das Werkzeugteil einschieben und fest gegen die
Fixierstifte (8) drücken. Dabei darauf achten, dass die Klemmplatte richtig in der
Halterung des Geräts sitzt, weil der Hebel für die Schnellspannung sich sonst nicht
drehen lässt.
4 Das eingesetzte Werkzeugteil mit dem Hebel (1) der Schnellspannung feststellen. Dann
den Hebel im Uhrzeigersinn drehen, um die Klemmplatte und das Werkzeugteil
ordnungsgemäß zu sichern.
5 Anschließend überprüfen, dass der Hebel für die Schnellspannung wirklich fest greift.
6 Dann den Hebel für die Schnellspannung nach unten ziehen und drehen, bis er sich
direkt über der Halterung befindet.
7 Den Hebel für die Schnellspannung in die Halterung drücken.
8 Zum Herausnehmen des Werkzeugteils diesen Vorgang in umgekehrter Reihenfolge
ausführen.
WARNHINWEIS: Dieses Gerät arbeitet mit speziell ausgelegtem
Schnellspann-Zubehör, verwenden Sie kein anderes Zubehör an diesem
Gerät.
WARNHINWEIS: Prüfen Sie das eingesetzte Zubehör auf den
ordnungsgemäßen und sicheren Sitz. Falsch oder nicht sicher befestigtes
Zubehör kann sich während des Betriebs lösen und zu einer Gefahr werden.
7.2 Schleifpapier anbringen / entfernen
Das Anbringen des Schleifpapiers erfolgt mit dem Schnellspann-System.
Das Schleifpapier auflegen und von Hand andrücken.
Dann das Schleifpapier mit einem kurzen und festen Druck gegen die flache Fläche des
Schleiftellers (12) drücken. Anschließend kann das Gerät eingeschaltet werden.
Auf diese Weise ist eine gute Anhaftung gewährleistet, und vorzeitiger Verschleiß wird
vermieden.
Wenn die verwendete Stelle am Schleifpapier abgenutzt ist, das Schleifpapier abnehmen,
es um 120 Grad drehen und wieder anbringen. Wenn das Schleifpapier insgesamt zu
stark abgenutzt ist, ein neues Schleifpapier verwenden.
7.3 Staubabsaugung anbringen (Abb. 4)
Die Staubabsaugung (10) unten am Gerät anschrauben. Dabei muss die Schraube sich am
unteren Teil der Staubabsaugung befinden. So kann sie bequem und leicht in das
Schraubloch eingedreht werden. Nachdem dieses Teil am Gerät angebracht ist, kann das
Staubrohr (11) an der Staubabsaugung montiert werden. Das Rohr fest andrücken. Das Rohr
kann durch leichtes Bewegen in die gewünschte Richtung optimal ausgerichtet werden.

8 BETRIEB

8.1 Gerät ein- und ausschalten (Abb.5)
Zuerst überprüfen, dass das Netzkabel und der Netzstecker unbeschädigt und in
ordnungsgemäßem Zustand sind.
Den Netzstecker mit der Stromversorgung verbinden.
Gerät einschalten. Den Ein-/Aus-Schalter (2) nach vorn auf die Stellung “I” stellen.

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results