PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC SK

Copyright © 2021 VARO S t r a n a | 9 www.varo.com

11 HLUK

Hodnoty emisií hluku namerané podľa príslušnej normy. (K=3)
Hladina akustického tlaku LpA
81 dB(A)
Hladina akustického výkonu LwA
92 dB(A)
POZOR! Ak akustický tlak prekročí úroveň 85 dB(A), používajte chrániče
sluchu.
aw (Vibrácie)
3 m/s²
K = 1,5 m/s²

12 ZÁRUKA

Záručná lehota poskytovaná na tento výrobok v súlade s platnými zákonmi je 36 mesiacov
a začína plynúť dňom zakúpenia prvým používateľom.
Táto záruka zahŕňa všetky chyby materiálu a výrobné chyby, okrem: batérií, nabíjačiek,
chybných súčastí, ktoré podliehajú bežnému opotrebovaniu ako napr. ložiská, kefky, káble
a zástrčky alebo príslušenstvo ako vrtáky, vrtné korunky, pílové listy atď.; nezahŕňa
poškodenia alebo chyby spôsobené zlým zaobchádzaním, nehodami alebo
pozmeňovaním, ani náklady na prepravu.
Poškodenie a/alebo chyby, ktoré sú dôsledkom nesprávneho používania, tiež nespadajú
pod ustanovenia záruky.
Nenesieme ani žiadnu zodpovednosť za zranenie osôb, ktoré je dôsledkom nesprávneho
používania zariadenia.
Opravy smie vykonávať iba autorizované servisné stredisko pre nástroje Powerplus.
Viac informácií získate na tel. čísle 00 32 3 292 92 90.
Prípadné náklady na prepravu vždy nesie zákazník, ak nebolo písomnou formou
dohodnuté inak.
Záruku si zároveň nemožno uplatňovať, ak bolo zariadenie poškodené v dôsledku
nedbanlivej údržby alebo preťaženia.
Zo záruky sú definitívne vylúčené prípady, kedy poškodenie vzniklo dôsledkom vniknutia
kvapaliny, nadmerného preniknutia prachu, úmyselného poškodenia (úmyselne alebo
závažnou nedbanlivosťou), nevhodného použitia (použitie zariadenia na účely, na ktoré
nie je vhodné), nekompetentného použitia (napr. nerešpektovaním pokynov vvode),
neodbornej montáže, zásahu bleskom, chybného sieťového napätia. Neboli uvedené
všetky možnosti.
Prijatie reklamácie v rámci záruky nemá vplyv na predĺženie záručnej lehoty, ani na
začatie novej záručnej lehoty v prípade výmeny zariadenia.
Staré zariadenia alebo súčasti, ktoré sú vymieňané v rámci záruky, sa preto stávajú
majetkom spol. Varo NV.
Vyhradzujeme si právo zamietnuť akúkoľvek reklamáciu, ak nie je možné overiť dátum
zakúpenia alebo ak je jasné, že výrobok nebol riadne udržiavaný. (čisté vetracie otvory,
pravidelná údržba uhlíkových kefiek,…)
Potvrdenku o nákupe si musíte uschovať ako doklad o dátume zakúpenia.
Náradie musíte vrátiť v nerozobranom stave svojmu predajcovi v prijateľne čistom stave,
v originálnom plastovom kufríku liatom pod tlakom, ak v ňom bolo vaše náradie dodané,
spolu s priloženým dokladom o kúpe.

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results