PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC SK

Copyright © 2021 VARO S t r a n a | 6 www.varo.com

7 MONTÁŽ

VAROVANIE: Vždy skontrolujte, či napätie napájacieho zdroja súhlasí s
napätím na výkonnostnom štítku. Elektrické náradie vyberte z balenia.
Predtým, ako ho zmontujete, nezapájajte ho do elektrickej siete.
7.1 Montáž brúsnej dosky/ pílového listu/ škrabky (obr. 1)
VAROVANIE: Pred montážou a nastavením vždy vyberte zástrčku z
elektrickej zásuvky.
Dávajte pozor na ostré nástroje ako škrabky, pílové listy alebo rezacie čepele.
1 Rýchlouvoľňovaciu svorku (7) povoľte potiahnutím rýchlouvoľňovacej páky (1) do úplne
otvorenej polohy.
2 Rýchlouvoľňovaciu páku otočte proti smeru hodinových ručičiek, kým sa upínacia doska
neuvoľní.
3 Rýchloinštalačný pílový list, brúsnu dosku alebo škrabku položte k výstupnému vretenu,
ktoré sa nachádza medzi svorkou krytu (9) a rýchlouvoľňovacou svorkou (7).
Príslušenstvo zatlačte dnu a umiestnite ho riadne na lokalizačné kolíky (8). Venujte
pozornosť tomu, aby sa upínacia doska nachádzala v držiaku stroja, v opačnom prípade
nemôžete otočiť rýchlouvoľňovaciu páku.
4 Utiahnite rýchlouvoľňovaciu páku (1), otočte ju v smere hodinových ručičiek, aby ste
utiahli upínaciu dosku a príslušenstvo.
5 Skontrolujte, či je rýchloupínacia páka riadne utiahnutá.
6 Potiahnite rýchlouvoľňovaciu páku nadol a otočte ju, kým sa nebude nachádzať hneď
nad držiakom.
7 Zatlačte rýchlouvoľňovaciu páku do držiaka.
8 Príslušenstvo vyberte opačným spôsobom.
VAROVANIE: Toto náradie je vybavené rýchloinštalovateľným
príslušenstvom počas prevádzky; nepoužívajte iné nezhodné príslušenstvo.
VAROVANIE: Skontrolujte tesné osadenie používaného
nástroja/príslušenstva. Nesprávne alebo nie bezpečne upevnené používané
nástroje/príslušenstvo sa môže počas prevádzky uvoľniť a predstavovať
riziko.
7.2 Montáž/výmena brúsneho papiera
S rýchlouvoľňovacím systémom na suchý zips.
Brúsny papier umiestnite do správnej polohy a pritlačte rukou.
Brúsny papier krátko a pevne pritlačte o plochý povrch brúsnej dosky (12) a elektrické
náradie zapnite.
Zabezpečí sa tým dobré pripevnenie a predídete tým predčasnému opotrebovaniu.
Ak sa špička opotrebovala, brúsny papier stiahnite, otočte o 120° a znovu ho pripevnite,
prípadne ho vymeňte.
7.3 Montáž dielov pre odsávanie prachu (obr. 4)
Vezmite adaptér na prach (10) a zaskrutkujte ho na spodnej strane stroja. Nezabudnite, že
skrutka musí byť na spodnej strane adaptéra na prach; týmto spôsobom ju môžete ľahko
zaskrutkovať do skrutkového otvoru. Po montáži tohto dielu do stroja, môžete pripojiť rúrku na

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results