PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC CS

Copyright © 2021 VARO Stránka | 4 www.varo.com

4 SYMBOLY

V tomto návodu a u přístroje jsou používány následující symboly:
Označuje riziko úrazu nebo
poškození nástroje.
Noste ochranné rukavice.
Před použitím si přečtěte
příručku.
Noste chránič sluchu. Noste
ochranné brýle.
V souladu se základními
požadavky Evropských
směrnic.
Třída II – Stroj má dvojitou
izolaci; nepotřebuje tedy
zemnicí vodič.

5 OBECNÁ BEZPEČNOSTNÍ UPOZORNĚNÍ PRO ELEKTRICKÉ

NÁSTROJE

Přečtěte si všechna bezpečnostní upozornění a všechny instrukce. Nedodržení upozornění a
instrukcí může vést k zasažení elektrickým proudem, požáru a/nebo vážnému úrazu.
Uschovejte si veškerá upozornění a instrukce, abyste do nich mohli později nahlédnout.
Termín "elektrický nástroj" v upozorněních znamená elektrický nástroj připojený (kabelem) k
síti nebo elektrický nástroj provozovaný (bez kabelu) na akumulátor.
5.1 Pracovní oblast
Udržujte pracoviště čistě a dobře osvětlené. Tmavá a nepřehledná pracoviště zvyšují
riziko nehody.
Neprovozujte elektrické nástroje v potenciálně výbušném prostředí, například v
přítomnosti hořlavých kapalin, plynů nebo prachu. Elektrické nástroje produkují jiskry,
které mohou prach nebo výpary zapálit.
Při práci s elektrickým nástrojem udržujte děti a okolostojící osoby opodál. Mohou odvést
vaši pozornost a ztratíte kontrolu nad nástrojem.
5.2 Elektrická bezpečnost
Vždy kontrolujte, zda přiváděné napětí odpovídá napětí uvedenému na typovém štítku.
Zástrčky elektrického nástroje musejí odpovídat zásuvkám. Zástrčku nikdy nijak
neupravujte. S uzemněnými elektrickými nástroji nepoužívejte nikdy rozvodné zástrčky.
Riziko zasažení elektrickým proudem je menší u neupravovaných zástrček a
kompatibilních zásuvek.
Vyhýbejte se tělesnému kontaktu s uzemněnými povrchy například na trubkách,
radiátorech, sporácích a ledničkách. Nebezpečí zasažení elektrickým proudem je větší,
jestliže je vaše tělo uzemněné.
Nevystavujte elektrické nástroje dešti nebo vlhkosti. Voda, která se dostane do
elektrického nástroje, zvyšuje riziko zasažení elektrickým proudem.
S kabelem zacházejte opatrně. Nikdy nástroj nenoste nebo netahejte na kabelu a
nevytahujete zástrčku ze zásuvky tahem za kabel. Šňůru chraňte před teplem, olejem,
ostrými hranami a pohybujícími se díly. Poškozené nebo zapletené kabely zvyšují riziko
zasažení elektrickým proudem.
Při práci s elektrickým nástrojem pod širým nebem používejte prodlužovací kabel vhodný
k vnějšímu použití. Použití kabelu vhodného k vnějšímu použití zmenšuje riziko zasažení
elektrickým proudem.

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results