PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC NL

Copyright © 2021 VARO P a g i n a | 6 www.varo.com
2. Draai de snelontgrendelingshendel in tegenwijzerzin totdat de gereedschapsklem los
staat.
3. Plaats het snelmontagezaagblad, schuurplaat of spatel op de aandrijfas die zich tussen
de klemplaat (9) en de gereedschapsklem (7) bevindt. Plaats het inzetgereedschap
stevig op de centreerpennen (8). Let erop dat de klemaansluiting van het gereedschap
goed in de houder van de machine zit, anders kunt u de snelontgrendelingshendel niet
draaien.
4. Zet vast met de snelontgrendelingshendel (1): draai hem in wijzerzin om de
gereedschapsklem en het inzetgereedschap vast te zetten.
5. Controleer dat de snelontgrendelingshendel voldoende vast staat.
6. Duw de hendel naar beneden en draai hem tot hij recht boven zijn houder zit.
7. Duw de snelontgrendelingshendel in de houder.
8. Om het inzetgereedschap te verwijderen, voert u bovenstaande stappen in omgekeerde
volgorde/richting uit.
WAARSCHUWING: die gereedschap is uitgerust met hulpstukken geschikt
voor snelmontage tijdens het werken; gebruik geen niet-geschikte
hulpstukken.
WAARSCHUWING: controleer of het hulpstuk/gereedschap stevig vastzit.
Verkeerd gemonteerde of loszittende hulpstukken/gereedschappen kunnen
tijdens het werken loskomen en een gevaar opleveren.
7.2 Aanbrengen/vervangen van het schuurpapier
Met klittenbandsnelsysteem.
Positioneer het schuurpapier en duw het met de hand aan.
Duw het met een korte, krachtige beweging tegen het oppervlak van de schuurplaat (12)
en schakel het gereedschap in.
Dit zorgt voor een goede hechting en voorkomt vroegtijdige slijtage.
Wanneer de punt versleten raakt, trek het schuurpapier dan los, draai het 120º en
monteer het opnieuw of vervang het.
7.3 Monteren van de stofafzuiging (Fig. 4)
Neem de stofafzuigadaper (10) en schroef hem op de onderkant van de machine. Onthoud
dat de schroef zich aan de onderkant van de stofafzuigadapter moet bevinden, op die manier
kunt u ze makkelijk en eenvoudig in het schroefgat draaien. Zodra dit onderdeel op de
machine gemonteerd zit, kunt u de stofpijp (11) op de stofafzuigadapter aansluiten. Duw met
een korte, krachtige druk op de pijp. U kunt de richting van de pijp altijd aanpassen door ze
een beetje in de gewenste richting te bewegen.

8 GEBRUIK

8.1 IN-/UITschakelen (Fig. 5)
Controleer eerst of het snoer en de stekker niet beschadigd zijn.
Sluit de stekker aan op een stopcontact.
Het gereedschap INschakelen: schuif de AAN/UIT-schakelaar (2) naar voor in de stand (I).
Het gereedschap UITschakelen: schuif de AAN/UIT-schakelaar terug in de stand (O).
8.2 De snelheid regelen (Fig. 6)
Het gereedschap kan op 6 snelheden ingesteld worden. Stand “1” stemt overeen met de
laagste en stand “6” met de hoogste snelheid. U kunt de verschillende snelheden instellen
door de regelknop (4) van stand “1” tot stand “6” in te stellen. Het kan nodig zijn om de
snelheid aan te passen om zo efficiënt mogelijk te werken.

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results