PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC SR

Copyright © 2021 VARO S t r a n a | 8 www.varo.com
8.3.3 Fino brušenje
Učinak u skidanju i brusna slika se odredjuju u bitnom izborom brusnog lista, prethodno
izabranim stepenom broja vibracija i pritiskom.
Samo besprekorni brusni listovi daju dobar učinak brušenja i čuvaju električni alat.
Pazite na ravnomeran pritisak, da bi povećali životni vek brusnih listova.
Prekomerno povećavanje pritiska ne vodi većem učinku brušenja, već jačem habanju
električnog alata i brusnog lista.
Za precizno brušenje uglova, ivica i teško pristupačnih područja možete raditi samo sa vrhom
ili jednom od ivica brusne ploče.
Pri brušenju sa preskakanjem može se brusni list jako zagrejati. Smanjite broj vibracija I
dopustite redovno hladjenje brusnog lista.
Ne koristite više brusni list sa kojim je obradjivan metal, za druge materijale.
8.3.4 Čišćenje šaberom
Izaberite pri čišćenju šaberom visoki stepen vibracija. Radite na mekoj podlozi (na primer
drvetu) pod malim uglom i sa malim pritiskom. U suprotnom nož može zaseći podlogu.

9 ČIŠĆENJE I ODRŽAVANJE

Pre vršenja bilo kakvog rada na mašini, izvucite utikač iz električne
utičnice.
Održavajte ventilacione proreze mašine čistim da biste sprečili pregrevanje motora.
Redovno čistite kućište motora mekanom krpom, po mogućnosti posle svake upotrebe.
Održavajte ventilacione proreze čistim od prašine i nečistoće.
Ukoliko se nečistoća ne skida, upotrebite mekanu krpu navlaženu sapunicom.
Nikada nemojte koristiti rastvarače kao što su benzin, alkohol, rastvor amonijaka u vodi,
itd. Ovi rastvarači mogu da oštete plastične delove.
Osigurajte da voda ne može da dopre do unutrašnjosti električnog alata!

10 TEHNIČKI PODACI

Br. modela
POWX1347MC
Napon
220-240 V
Frekvencija
50 Hz
Apsorbovana snaga
300 W
Brzina bez opterećenja
15 000-22 000 min-1

11 BUKA

Vrednosti emisije buke u skladu sa relevantnim standardom. (K=3)
Nivo zvučnog pritiska LpA
81 dB(A)
Nivo zvučne snage LwA
92 dB(A)
PAŽNJA! Nosite zaštitu za sluh kada je zvučni pritisak veći od 85 dB(A).
aw (Vibracije):
3 m/s²
K = 1,5 m/s²

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results