PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC HR

Copyright © 2021 VARO S t r a n i c a | 6 www.varo.com
3 Stavite list pile, brusnu ploču ili strugalo za brzo postavljanje prema izlaznom vretenu
koje se nalazi između stezaljke poklopca (9) i stezaljke za brzo oslobađanje (7). Gurnite
nastavak prema unutra i čvrsto ga postavite na smještajne zupce (8). Pazite da je stezna
ploča pravilno postavljena u držač na stroju, u suprotnom nije moguće okrenuti polugu za
brzo oslobađanje.
4 Pričvrstite polugom za brzo oslobađanje (1), okrenite u smjeru kazaljke sata radi
pričvršćivanja stezne ploče i nastavka.
5 Provjerite je li poluga za brzo oslobađanje dobro pričvršćena.
6 Povucite polugu za brzo oslobađanje prema dolje i okrenite je dok nije točno iznad
držača.
7 Gurnite polugu za brzo oslobađanje u držač.
8 Skidanje nastavka vrši se suprotnim redoslijedom.
UPOZORENJE: Alat je opremljen nastavcima za brzo postavljanje tijekom
rada; ne koristite nikakve druge nastavke.
UPOZORENJE: Provjerite zategnutost i siguran smještaj radnog
alata/nastavka. Nepravilno ili nedovoljno učvršćeni radni alati/nastavci
mogu tijekom rada postati neučvršćeni i predstavljati rizik.
7.2 Postavljanje/promjena brusnog papira
S pričvršćivanjem na čičak i sustavom za brzo oslobađanje.
Postavite brusni papir i pritisnite rukom.
Kratko i čvrsto pritisnite brusni papir na ravnu površinu brusne ploče (12) i uključite
električni alat.
To osigurava dobro prianjanje i sprječava brzo trošenje.
Ako radna točka postane istrošena, izvucite brusni papir, okrenite ga za 120º i ponovno
postavite ili promijenite brusni papir.
7.3 Ugradnja sklopa za izvlačenje prašine (slika 4)
Uzmite adapter za prašinu (10) i navijte ga na donji dio stroja. Pazite kako bi vijak bio na
donjem dijelu adaptera za prašinu, na taj način ga možete lagano i dobro naviti u otvor za vijak.
Nakon postavljanja tog dijela na stroj na adapter za prašinu priključite cijev za prašinu (11).
Cijev čvrsto gurnite. Smjer cijevi uvijek možete namjestiti malim pomakom cijevi u željenom
smjeru.

8 RAD

8.1 Uključivanje i isključivanje (slika 5)
Najprije provjerite je da kabel i utikač nisu oštećeni.
Utikač priključite na napajanje.
Uključivanje električnog alata: kližite sklopku za uključivanje i isključivanje (2) prema
naprijed u položaj (I).
Isključivanje električnog alata: kližite sklopku za uključivanje i isključivanje (2) natrag u
položaj (O).
8.2 Podešavanje brzine (slika 6)
Alat je moguće podesiti na 6 postavki brzine. Položaj "1" označava najnižu, a položaj "6"
najveću brzinu, različite brzine podešavaju se okretanjem gumba za podešavanje brzine (4)
od položaja "1" do "6". Korisnik može mijenjati brzinu za što učinkovitije korištenje alata.

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results