PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC FI

Copyright © 2021 VARO S i v u | 8 www.varo.com
Varmista että vettä ei pääse sähkötyökalun sisälle!

10 TEKNISET TIEDOT

Mallinumero
POWX1347MC
Jännite
220-240 V
Verkkotaajuus
50 Hz
Teho
300 W
Nopeus kuormittamattomana
15.000-22.000 Min-1

11 MELU

Melupäästöjen arvot on mitattu asianmukaisen standardin mukaan. (K=3)
Äänenpainetaso LpA
81 dB(A)
Äänitehotaso LwA
92 dB(A)
HUOMIO! Käytä kuulosuojaimia, kun äänenpaine on yli 85 dB(A).
aw (Tärinätaso):
3 m/s²
K = 1,5 m/s²

12 TAKUU

Tälle tuotteelle on annettu 36 kuukauden takuu, joka alkaa hankintapäivämäärästä, jolloin
ensimmäinen käyttäjä on ostanut tuotteen.
Takuu kattaa kaikki materiaali- tai valmistusviat, mutta ei kata: akkuja, latureita
normaalista osien kulumisesta johtuvia vikoja, kuten laakereita, harjoja, kaapeleita, tulppia
tai lisävarusteita kuten poria, poran teriä, sahan teriä jne.; vahinkoja tai vikoja, jotka
johtuvat väärinkäytöstä, onnettomuuksista tai tuotteeseen tehdyistä muutoksista; eikä
myöskään kuljetuskustannuksia.
Väärästä käytöstä johtuvat viat ja/tai vauriot eivät myöskään kuulu takuun piiriin.
Pidätämme myös itsellämme oikeuden hylätä vaatimus, joka koskee työkalun väärästä
käytöstä aiheutunutta ruumiillista vammaa.
Korjaukset saa suorittaa vain Powerplus-työkalujen valtuuttamassa huoltopisteessä.
Lisätietoja saat tarvittaessa puhelinnumerosta 00 32 3 292 92 90.
Asiakas vastaa myös mahdollisista kuljetuskustannuksista, ellei ole kirjallisesti toisin
sovittu.
Samanaikaisesti mitään vaatimuksia ei voida tehdä takuuseen, jos laitteessa ilmenevä
vika on seurausta laiminlyödystä huollosta tai ylikuormituksesta.
Takuun piiriin eivät kuulu viat, jotka johtuvat nesteen tunkeutumisesta laitteeseen,
liiallisesta pölystä, tahallisesti aiheutetusta viasta (tahallisesta toiminnasta tai
huolimattomuudesta johtuen), väärästä käytöstä (laitteelle sopimattomat
käyttötarkoitukset), taitamattomasta käytöstä (esim. käsikirjan ohjeita ei noudateta),
väärästä kokoamisesta, salaman iskusta, virheellisestä verkkojännitteestä. Tämä lista ei
ole rajoittava.
Vaatimusten hyväksyminen takuun piiriin kuuluvana ei voi koskaan johtaa takuukauden
pidentämiseen eikä uuden takuukauden alkamiseen, jos laite joudutaan vaihtamaan
uuteen.
Laitteet tai osat jotka on vaihdettu takuun piiriin kuuluvana, ovat Varo NV:n omaisuutta.
Pidätämme itsellämme oikeuden hylätä vaatimukset, jos hankintaa ei voida tarkistaa tai
jos on ilmeistä, ettei tuotetta ei ole huollettu asianmukaisesti. (ilmanottoaukkojen
puhdistus, hiiliharjojen säännöllinen huolto,…)
Säilytä kassakuitti ostopäivämäärän tositteena.

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results