PowerPlus POWX1347MC manual

PowerPlus POWX1347MC
7.1 · 1
PDF manual
 · 232 pages
English
manualPowerPlus POWX1347MC

POWX1347MC FI

Copyright © 2021 VARO S i v u | 7 www.varo.com
180
240
K: Kärkihiontalevy
Hiontalevy kärkihiontapapereille.
L: Kärkihiontapapereita
Erikarkeuksisia kärkihiontapapereita:
120
180
240
8.3.2 Sahaus
Käytä yksinomaan virheettömiä, moitteettomassa kunnossa olevia
sahanteriä. Taipuneet, tylsät tai muulla tavalla vaurioituneet sahanterät
voivat murtua.
Ainoastaan pehmeitä materiaaleja, kuten puuta, kipsikartonkia ja vastaavaa
saa työstää upposahausmenetelmällä!
Ennen kuin sahaat sahanterillä puuta, lastulevyä, rakennusmateriaaleja jne., tarkasta että
niissä ei ole vieraita kappaleita, kuten nauloja, ruuveja tai vastaavanlaisia kappaleita. Irrota
tarvittaessa vieraat kappaleet tai käytä metallisahanteriä.
8.3.3 Hionta
Hiontateho ja hiontajälki määräytyvät pääasiassa valitusta hiomapyöröstä, asetetusta
värähtelyvaiheesta ja työstöpaineesta.
Vain moitteettomassa kunnossa olevat hiomapaperit antavat hyvän hiontatehon ja säästävät
sähkötyökalua.
Kiinnitä huomiota tasaiseen puristuspaineeseen, hiomapaperin kestoiän kasvattamiseksi.
Paineen turha lisääminen ei paranna hiontatehoa, vaan johtaa laitteen ja hiomapaperin
voimakkaampaan kulumiseen.
Kulmien, reunojen ja vaikeasti päästävien alueiden tarkassa hionnassa voidaan myös käyttää
pelkästään hiomalevyn kärkeä tai reunaa.
Pistemäisessä hionnassa saattaa hiomapaperi kuumentua voimakkaasti. Pienen
värähtelytaajuutta ja anna hiomapaperin jäähtyä säännöllisesti.
Hiomapaperi, jolla on hiottu metallia, ei tulisi käyttää muita materiaaleja varten.
8.3.4 Kaavinta
Valitse korkea värähtelyvaihe kaavintaa varten. Työskentele pehmeällä alustalla (esim. puu)
loivassa kulmassa ja pienellä puristuspaineella. Kaavin saattaa muutoin leikata alustaa.

9 PUHDISTUS JA HUOLTO

Ennen kuin suoritat mitään toimenpiteitä laitteelle, irrota virtajohto.
Pidä koneen tuuletusaukot puhtaina, ettei moottori ylikuumene.
Puhdista koneen kotelo säännöllisesti pehmeällä kankaalla, mieluiten jokaisen
käyttökerran jälkeen.
Pidä ilmanvaihtoaukot puhtaina.
Jos lika ei irtoa, käytä pehmeää kangasta, joka on kostutettu saippuaveteen.
Älä koskaan käytä bensiinin, alkoholin tai ammoniakkiveden tapaisia liuottimia. Nämä
liuottimet voivat vahingoittaa muoviosia.

Manual

View the manual for the PowerPlus POWX1347MC here, for free. This manual comes under the category multi tools and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the PowerPlus POWX1347MC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the PowerPlus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

PowerPlus POWX1347MC specifications

Below you will find the product specifications and the manual specifications of the PowerPlus POWX1347MC.

General
BrandPowerPlus
ModelPOWX1347MC
Productmulti-tool
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the PowerPlus POWX1347MC below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

How do I mount the sanding plate, saw blade, or spatula on the PowerPlus POWX1347MC multi-tool?

1. Loosen the quick release clamp by pulling the quick-release lever completely open. 2. Spin the quick release lever counterclockwise until the clamping plate is loose. 3. Place the sanding plate, saw blade, or spatula towards the output spindle between the cover clamp and quick release clamp. Push the accessory in and firmly place it onto the locating pins. Ensure the clamping plate is well-placed into the holder. 4. Fasten the accessory by using the quick-release lever, spinning it clockwise to secure the clamping plate and accessory. 5. Verify that the quick release lever is tightened adequately. 6. Pull the quick release lever down and position it right above the holder. 7. Push the quick release lever into the holder to complete the mounting process.

How can I change the sandpaper on the PowerPlus POWX1347MC multi-tool?

To change the sandpaper on the PowerPlus POWX1347MC multi-tool, follow these steps: 1. Press the sandpaper firmly against the flat surface of the sanding plate. 2. Switch on the power tool to ensure good adhesion and prevent premature wear. 3. If the sandpaper becomes worn, pull it off, turn it through 120º, and place it back on or replace it. 4. Position the new sandpaper and press it by hand to secure it in place. Remember to always follow these steps carefully to maintain the effectiveness of your multi-tool.

Is the manual of the PowerPlus POWX1347MC available in English?

Yes, the manual of the PowerPlus POWX1347MC is available in English .

Is your question not listed? Ask your question here

No results